Refine
Year of publication
Document Type
- Article (439) (remove)
Institute
- Wirtschaft (133)
- Forschungszentrum Mikrotechnik (96)
- Forschungszentrum Business Informatics (67)
- Technik | Engineering & Technology (55)
- Department of Computer Science (Ende 2021 aufgelöst; Integration in die übergeordnete OE Technik) (54)
- Forschungszentrum Energie (51)
- Soziales & Gesundheit (49)
- Forschungsgruppe Empirische Sozialwissenschaften (22)
- Didaktik (mit 31.03.2021 aufgelöst; Integration ins TELL Center) (20)
- Josef Ressel Zentrum für Materialbearbeitung (15)
Language
- English (279)
- German (158)
- Multiple languages (2)
Is part of the Bibliography
- yes (439) (remove)
Keywords
- Laser ablation (8)
- Entscheidung (6)
- Evolution strategy (5)
- Soziale Arbeit (5)
- Volatile organic compounds (5)
- Y-branch splitter (5)
- Ausscheidung (4)
- Demand side management (4)
- Organisation (4)
- Schreibdidaktik (4)
In this paper, low-loss Y-branch splitters up to 128 splitting ratio are designed, simulated, and optimized by using 2D beam propagation method in OptiBPM tool by Optiwave. For an optical waveguide, a silica-on-silicon material platform is used. The splitters were designed as a planar structure for a telecommunication operating wavelength of 1.55 m. According to the minimum insertion loss and minimum non-uniformity, the optimum length for each Y-branch is determined. The influence of the pre-defined S-Bend waveguide shapes (Arc, Cosine, Sine) and of the waveguide core size reduction on the splitter performance has been also studied. The obtained simulation results of all designed splitters with different S-Bend shape waveguides together with the different waveguide core sizes are discussed and compared with each other.
Greater specific energy densities in lithium-ion batteries can be achieved by using three-dimensional (3D) porous current collectors, which allow for greater areal mass loadings of the electroactive material. In this paper, we present the use of embroidered current collectors for the preparation of thick, pouch-type Li-ion batteries. Experiments were performed on LiFePO 4 (LFP) water-based slurries using styrene-butadiene rubber (SBR) as binder and sodium carboxymethyl cellulose (CMC) as thickener, and formulations of different rheological characteristics were investigated. The electrochemical performance (cyclic voltammetry, rate capability) and morphological characteristics of the LFP half-pouch cells (X-ray micro computed tomography and scanning electron microscopy) were compared between the formulations. An optimum electrode formulation was identified, and a mechanism is proposed to explain differences between the formulations. With the optimum electrode formulation, 350 µm casted electrodes with high mechanical stability were achieved. Electrodes exhibited 4–6 times greater areal mass loadings (4–6 mAh cm −2 ) and 50% greater electroactive material weight than with foils. In tests of half- and full-pouch embroidered cells, a 50% capacity utilization at 1C-rate and 11% at 2C-rate were observed, with a full recovery at C/5-rate. The cycling stability was also maintained over 55 cycles.
Was Kennzahlen aussagen
(2021)
Was ist als Ergebnis der Operation 1 : 2 als „korrekt“ anzuerkennen? In der Menge der natürlichen Zahlen N ist 0 korrekt, in der Menge der rationalen Zahlen Q ist 0,5 richtig. Was „wahr“ ist, hängt also von den Ermittlungs- und Berechnungsgrundlagen ab. Das übersehen viele Führungskräfte beim Umgang mit Kennzahlen genau so, wie die Bedeutung ihrer kommunikativen Kompetenzen.
Wahrheit braucht Vertrauen
(2022)