Refine
Year of publication
Document Type
- Conference Proceeding (81)
- Article (26)
- Part of a Book (2)
- Book (1)
- Habilitation (1)
Institute
Language
- English (110)
- Multiple languages (1)
Keywords
- Y-branch splitter (11)
- arrayed waveguide gratings (11)
- photonics (8)
- integrated optics (6)
- Arrayed waveguide gratings (5)
- MMI splitter (5)
- OCT (5)
- insertion loss (5)
- AWG (4)
- AWG design (4)
- AWG-spectrometer (4)
- MMI splitters (4)
- Optical coherence tomography (4)
- silicon nitride (4)
- 3D MMI splitter (3)
- Couplers (3)
- Crosstalk (3)
- Photonics (3)
- Telecommunications (3)
- frequency 100 GHz (3)
- polymers (3)
- transmission characteristics (3)
- wavelength division multiplexing (3)
- AWG-Analyzer tool (2)
- AWG-parameters tool (2)
- Light propagation (2)
- Optical device fabrication (2)
- Optical fibers (2)
- Optical splitter (2)
- Polymer (2)
- Refractive index (2)
- Standards (2)
- Y-branch (2)
- arrayed waveguide grating (2)
- demultiplexing equipment (2)
- integrated photonics (2)
- optical beam splitters (2)
- optical communication equipment (2)
- optical properties (2)
- optical splitting (2)
- optical waveguides (2)
- rib waveguides (2)
- telecommunication (2)
- telecommunications (2)
- #kinderuni4you (1)
- 128-channel 10 GHz AWG design (1)
- 128-channel 10 GHz AWG simulation (1)
- 1x128 MMI splitter (1)
- 2x2 optical switch (1)
- 3D 1×4 Multimode Interference Splitter (1)
- 3D MMI splitters (1)
- 3D Y-branch splitter (1)
- 3D optical splitters (1)
- 3D splitter (1)
- AWG channel spacing (1)
- AWG design tool (1)
- AWG software tool (1)
- AWG transmission parameters (1)
- AWG-Parameters (1)
- AWG-Spectrometer (1)
- AWG-based demultiplexers (1)
- AWG-parameter layout (1)
- AWG-parameter tool (1)
- Active alignment (1)
- Adaptive optics (1)
- Apollo photonics (1)
- Automated Adjustment (1)
- CMOS-Compatible (1)
- Channel spacing (1)
- Characterization (1)
- Children university (1)
- Coupling of Fiber Array (1)
- Coupling structure (1)
- Covid-19 crisis (1)
- DLW (1)
- DWDM (1)
- FTTx (1)
- FTTx networks (1)
- Fiber arrays (1)
- Fibre array (1)
- Fs-laser ablation (1)
- GPON access networks (1)
- High-speed optical techniques (1)
- IP-Dip polymer (1)
- Industry (1)
- LIPPS (1)
- Layout (1)
- Light (1)
- Light's got it! (1)
- Loss measurement (1)
- MMI (1)
- MMI Splitter (1)
- Multimode interferece (1)
- Noise measurement (1)
- OCT on-chip (1)
- OCT-spectrometer (1)
- Optical coupling (1)
- Optical crosstalk (1)
- Optical fiber sensors (1)
- Optical losses (1)
- Optical performance (1)
- Optical polarization (1)
- Optical properties (1)
- Optical refraction (1)
- Optical transmission systems (1)
- Optiwave photonic tool (1)
- Optiwave software tool (1)
- PICs (1)
- PON (1)
- Photonics Explorer (1)
- Photonics integrated circuit (1)
- Polymer AWG (1)
- Polymer based optical splitters (1)
- Propagation losses (1)
- R-soft photonic tool (1)
- S-Bend (1)
- Semiconductor device measurement (1)
- Sensing applications (1)
- Sensor (1)
- Shape (1)
- Si3N4 (1)
- Si3N4 based AWG spectrometer (1)
- Si3N4 based AWGs (1)
- Si3N4 waveguides (1)
- SiN Photonics (1)
- SiN passive optical components (1)
- SiO2 (1)
- Spectral multiplex (1)
- Splitter design (1)
- TM-polarized light (1)
- Telekommunikation (1)
- Temperature (1)
- Temperature characterization (1)
- Temperature stability (1)
- Ultra-Dense WDM (1)
- WDM-PON system (1)
- Waveguide photonic building blocks s (1)
- Wavelength measurement (1)
- XG-PON access networks (1)
- Y-branch optical splitter (1)
- Y-branch waveguide shape modelling (1)
- absorption spectra (1)
- access network (1)
- asymmetric splitting ratio (1)
- background noise (1)
- beam propagation method (1)
- colourless 8-channel AWG (1)
- colourless AWG (1)
- commercial photonics software tool (1)
- commercial photonics tools (1)
- concept (1)
- cyclic AWG (1)
- design (1)
- design and simulation (1)
- direct laser writing lithography (1)
- femtosecond laser processing (1)
- fiber array (1)
- frequency 10 GHz (1)
- gas sensing (1)
- high channel Y-branch splitter (1)
- high channel count AWG (1)
- high index contrast AWG (1)
- high-index contrast AWG (1)
- information and communication technology (1)
- laser ablation (1)
- laser writing optical lithography (1)
- light polarisation (1)
- light propagation (1)
- light transmission (1)
- low loss 1×64 y-branch splitter (1)
- low-index 8-channel optical demultiplexer (1)
- medical diagnostic imaging applications (1)
- miniaturization (1)
- modelling (1)
- multimode interference splitter (1)
- multiplexing equipment (1)
- narrow channel spacing AWG (1)
- optical coherence tomography (1)
- optical communication systems (1)
- optical datatransmissison (1)
- optical design (1)
- optical design techniques (1)
- optical fibre losses (1)
- optical fibre networks (1)
- optical gas sensors (1)
- optical multiplexers//demultiplexers (1)
- optical noise (1)
- optical power splitter (1)
- optical splitters (1)
- optical switch (1)
- optical transmission systems (1)
- packaging (1)
- passive optical networks (1)
- photonic integrated circuit (1)
- photonic integrated circuits (1)
- photonics chip butt coupling (1)
- photonics integrated circuit (1)
- photonics integrated circuits (1)
- polarization dependent loss. (1)
- polymer (1)
- power splitter (1)
- rib waveguide (1)
- ridge waveguide (1)
- ridge waveguides (1)
- sensor (1)
- silica based AWG designs (1)
- silicon compounds (1)
- simulated transmission characteristics (1)
- small footprint (1)
- spectral domain OCT (1)
- split power (1)
- splitter (1)
- splitting properties (1)
- stand-alone software tool (1)
- symmetric splitting ratio (1)
- temperature sensitivity of parameters (1)
- tool design (1)
- ultra-DWDM (1)
- ultra-dense wavelength division multiplexing (1)
- waveguide structure (1)
- waveguide tapers (1)
- waveguides (1)
- wavelength 850 nm (1)
In this paper, low-loss Y-branch splitters up to 128 splitting ratio are designed, simulated, and optimized by using 2D beam propagation method in OptiBPM tool by Optiwave. For an optical waveguide, a silica-on-silicon material platform is used. The splitters were designed as a planar structure for a telecommunication operating wavelength of 1.55 m. According to the minimum insertion loss and minimum non-uniformity, the optimum length for each Y-branch is determined. The influence of the pre-defined S-Bend waveguide shapes (Arc, Cosine, Sine) and of the waveguide core size reduction on the splitter performance has been also studied. The obtained simulation results of all designed splitters with different S-Bend shape waveguides together with the different waveguide core sizes are discussed and compared with each other.
In this work, we present a significant step toward in vivo ophthalmic optical coherence tomography and angiography on a photonic integrated chip. The diffraction gratings used in spectral-domain optical coherence tomography can be replaced by photonic integrated circuits comprising an arrayed waveguide grating. Two arrayed waveguide grating designs with 256 channels were tested, which enabled the first chip-based optical coherence tomography and angiography in vivo three-dimensional human retinal measurements. Design 1 supports a bandwidth of 22 nm, with which a sensitivity of up to 91 dB (830 µW) and an axial resolution of 10.7 µm was measured. Design 2 supports a bandwidth of 48 nm, with which a sensitivity of 90 dB (480 µW) and an axial resolution of 6.5 µm was measured. The silicon nitride-based integrated optical waveguides were fabricated with a fully CMOS-compatible process, which allows their monolithic co-integration on top of an optoelectronic silicon chip. As a benchmark for chip-based optical coherence tomography, tomograms generated by a commercially available clinical spectral-domain optical coherence tomography system were compared to those acquired with on-chip gratings. The similarities in the tomograms demonstrate the significant clinical potential for further integration of optical coherence tomography on a chip system.
A Telecom optical fibers are still being the best transmission medium of digital data and analogue signals for long distance applications. Progress in integrated photonics enables development of photonic chips with new unique properties, circuits of the future, and overcomes current limits in information and communication technologies. The packaging of photonic chips is necessary for taking them out of research laboratories into real implementation in the information and communication technology applications. One important step of packaging is effective coupling of optical radiation between telecom optical fiber with ten microns core dimension and photonic chip optical waveguide with submicron dimensions. For complex photonic chips, it is necessary to couple not one optical fiber but several optical fibers, which are arranged in fiber arrays. In this case, it is necessary to use a 6D positioning system, which allows to optimally adjust the relative position of the photonic chip and the fiber arrays. After setting the optimal relative position of the photonic chip and the fiber array, the process of their fixation follows. One possibility of fixation is gluing with an adhesive in the optical path between the photonic chip and an array of optical fibers with a refractive index close to the refractive index of the optical fiber core. This paper is focused on the experimental test set-up for the temperature characterization of fiber array to photonics chip butt coupling at 1310 nm and 1550 nm wavelengths fixed themselves by UV adhesive in the optical path. The main aims of this works are selection of better adhesive from two types for gluing of photonic chip and fiber array in packaging process of photonics chips and validation of gluing process developing. The coupling and alignment of fiber arrays to photonics chip were done by automated active alignments system and they were fixed themselves by curable epoxy adhesive. Temperature changes of coupling insertion losses are measured and investigated for two different UV adhesives during three temperature cycles from -40 °C to 80 °C in climatic chamber according to Telcordia. Spectral dependence of insertion losses were measured and compared before and after three temperature cycles for 1530 nm to 1570 nm spectral range at room temperature.
This work was supported by the Slovak Research and Development Agency under the contracts APVV-17-0662 and SK-AT-20-0017 and by the COST Action “European Network for High Performance Integrated Microwave Photonics” (EUIMWP) CA16220.
The main aims of this work are the validation of the developed process of gluing a single-mode optical fiber array with a photonic chip and the selection of a more suitable adhesive from the two adhesives being compared. An active alignment system was used for adjusting the two optical fiber arrays to a photonics chip. The gluing was done by two compared UV curable adhesives applied in the optical path. The insertion losses of glued coupling were measured and investigated at two discrete wavelengths 1310 nm and 1550 nm during temperature testing in the climatic chamber according to Telcordia GR_1209_Corei04 [3]. The measurement, investigation, and comparison of insertion losses of the glued coupling at the spectral band from 1530 nm to 1570 nm were done immediately after gluing process and after three temperature cycles in the climatic chamber with one month delay.
In this paper we report on the experimental test set-up for the temperature characterization of fiber array to photonics chip butt coupling at 1310 nm and 1550 nm wavelengths. The alignment and gluing of fiber arrays to photonics chip were done by automated active alignments system and they were fixed themselves by UV curable epoxy adhesive. Temperature changes of coupling insertion losses are measured and investigated for two different UV adhesives during three temperature cycles from -40 °C to 80 °C in climatic chamber. Spectral dependence of insertion losses was measured and compared before and after three temperature cycles for 1530 nm to 1570 nm spectral range at room temperature.
We present the technological verification of a size-optimized 160-channel, 50-GHz silicon nitride-based AWG-spectrometer. The spectrometer was designed for TM-polarized light with a central wavelength of 850 nm applying our proprietary “AWG-Parameters” tool. For the simulations of AWG layout, the WDM PHASAR photonics tool from Optiwave was used. The simulated results show satisfying optical properties of the designed AWG-spectrometer. However, the high-channel count causes a large AWG size with standard design approaches. To solve this problem we designed a special taper enabling the reduction of AWG structure by about 15% while keeping the same optical properties. The AWG design was fabricated and the measured spectra not only confirm the proposed size-reduction but also the improvement of optical properties of the size-optimized AWG.