Refine
Document Type
Institute
Language
- English (3)
Has Fulltext
- no (3)
Is part of the Bibliography
- yes (3)
Keywords
- Micromechanical devices (3) (remove)
The properties of diamond make it an attractive material for MEMS and sensor devices. We present the feasibility to fabricate membranes and cantilevers made of nano-(micro-) crystalline diamond films grown on Si/SiO2 substrates using microwave chemical vapour deposition (MWCVD). The patterning of micromechanical structures was performed by a combined process of femtosecond laser ablation and wet etching. We designed cantilever structures with varying lengths and widths (25, 50, 100, 200 and 300 μm). The cantilevers were made in a symmetric left- and right-hand configuration. An additional laser treatment was used to modify the mechanical properties of the left-hand cantilever. The deflection of the laser-treated, and non-treated sections was measured. The global mechanical system properties were simulated and corresponded with high accuracy to the measured results of deflection.
Parametric anti-resonance is a phenomenon that occurs in systems with at least two degrees of freedom; this can be achieved by periodically exciting some parameters of the system. The effect of this properly tuned periodicity is to increase the dissipation in the system, which leads to a raising in the effective damping of vibrations. This contribution presents the design of an open-loop control to reduce the settling time using the anti-resonance concept. The control signal consists of a quasi-periodic signal capable of transferring the system’s oscillations from one mode to another mode of the system. The general averaging technique is used to characterize the dynamics, particularly the so-called slow dynamics of motion. With this analysis, the control signal is designed for the potential application of a microelectromechanical sensor arrangement; for this specific example, up to 96.8% reduction of settling time is achieved.