Refine
Year of publication
Document Type
- Conference Proceeding (137)
- Article (104)
- Preprint (4)
- Part of a Book (3)
- Doctoral Thesis (2)
- Book (1)
- Habilitation (1)
- Other (1)
Institute
- Forschungszentrum Mikrotechnik (253) (remove)
Language
- English (247)
- German (5)
- Multiple languages (1)
Keywords
- Laser ablation (11)
- Y-branch splitter (11)
- arrayed waveguide gratings (11)
- photonics (8)
- integrated optics (6)
- Arrayed waveguide gratings (5)
- MMI splitter (5)
- OCT (5)
- insertion loss (5)
- AWG (4)
- AWG design (4)
- AWG-spectrometer (4)
- MMI splitters (4)
- Optical coherence tomography (4)
- silicon nitride (4)
- 3D MMI splitter (3)
- Couplers (3)
- Crosstalk (3)
- High-speed optical techniques (3)
- Micromechanical devices (3)
- Photonics (3)
- Telecommunications (3)
- frequency 100 GHz (3)
- polymers (3)
- transmission characteristics (3)
- wavelength division multiplexing (3)
- AWG-Analyzer tool (2)
- AWG-parameters tool (2)
- Dissolution rate monitor (2)
- Femtosecond laser (2)
- Gold (2)
- HEMT (2)
- IDA (2)
- Laser beam machining (2)
- Laser materials processing (2)
- Levodopa (2)
- Light propagation (2)
- MEMS (2)
- Measurement by laser beam (2)
- Microneedle (2)
- Nanogap sensor (2)
- Optical device fabrication (2)
- Optical fibers (2)
- Optical splitter (2)
- Parkinson’s disease (2)
- Polymer (2)
- Pump-probe microscopy (2)
- Redox cycling (2)
- Refractive index (2)
- Semiconductor device measurement (2)
- SiO2 (2)
- Silicon (2)
- Standards (2)
- Y-branch (2)
- arrayed waveguide grating (2)
- deep reactive ion etching (2)
- demultiplexing equipment (2)
- diamond (2)
- integrated photonics (2)
- laser ablation (2)
- optical beam splitters (2)
- optical communication equipment (2)
- optical properties (2)
- optical splitting (2)
- optical waveguides (2)
- pump-probe (2)
- rib waveguides (2)
- silicon compounds (2)
- telecommunication (2)
- telecommunications (2)
- thin film (2)
- #kinderuni4you (1)
- +NPC 372 (1)
- +TEJ 630 (1)
- 128-channel 10 GHz AWG design (1)
- 128-channel 10 GHz AWG simulation (1)
- 1x128 MMI splitter (1)
- 2768 Plasmasphere (1)
- 2784 Solar wind/magnetosphere interactions (1)
- 2x2 optical switch (1)
- 3D 1×4 Multimode Interference Splitter (1)
- 3D MMI splitters (1)
- 3D Y-branch splitter (1)
- 3D optical splitters (1)
- 3D splitter (1)
- AWG channel spacing (1)
- AWG design tool (1)
- AWG software tool (1)
- AWG transmission parameters (1)
- AWG-Parameters (1)
- AWG-Spectrometer (1)
- AWG-based demultiplexers (1)
- AWG-parameter layout (1)
- AWG-parameter tool (1)
- AZ MiR 701 (1)
- Ablation efficiency (1)
- Active alignment (1)
- Adaptive optics (1)
- AlGaN-GaN (1)
- AlGaN/GaN HEMT (1)
- Aluminum gallium nitride (1)
- Apollo photonics (1)
- Automated Adjustment (1)
- Biodegradable polymers (1)
- Biosensor (1)
- Biosensors (1)
- Bulk micromachining (1)
- Burst mode (1)
- CMOS-Compatible (1)
- CRESS satellite (1)
- Channel spacing (1)
- Characterization (1)
- Chemical sensors (1)
- Children university (1)
- Chronoamperometry (1)
- Color (1)
- Computational fluid dynamics (1)
- Conduction bands (1)
- Copper (1)
- Coupling of Fiber Array (1)
- Coupling structure (1)
- Covid-19 crisis (1)
- Cracking (1)
- Cycle-olefin polymer (COP) (1)
- DLW (1)
- DRM (1)
- DWDM (1)
- Dental hard tissue ablation (1)
- Diodes (1)
- Distributed feedback lasers (1)
- Dye lasers (1)
- EBDW lithography (1)
- Electric potential (1)
- Electrochemical biosensor (1)
- Electrochemical detection (1)
- Electrodes (1)
- Elemental semiconductors (1)
- Enamel (1)
- Entangled photons (1)
- Excimer lasers (1)
- Excited States (1)
- FTTx (1)
- FTTx networks (1)
- Femtosecond ablation (1)
- Femtosecond phenomena (1)
- Fiber arrays (1)
- Fibre array (1)
- Fine-structure splitting (1)
- Fingers (1)
- Fs-laser ablation (1)
- GPON access networks (1)
- GaAs (1)
- GaN-SiC (1)
- Gallium nitride (1)
- Gas sensor (1)
- Hot States (1)
- Hot embossing (1)
- ICP (1)
- III-V semiconductors (1)
- IP-Dip polymer (1)
- Industry (1)
- Interdigitated electrode array (1)
- Interdigitated electrode array (IDA) (1)
- Irradiated tissue (1)
- LED (1)
- LIPPS (1)
- LSMO membrane (1)
- Lab-on-a-Chip (1)
- Lab-on-a-chip (1)
- Lab-on-a-chip (LOC) (1)
- Laser (1)
- Laser dicing (1)
- Layout (1)
- Light (1)
- Light's got it! (1)
- Lithography (1)
- Lithography simulation (1)
- Log-periodic antenna (1)
- Loss measurement (1)
- MEMS sensors (1)
- MMI (1)
- MMI Splitter (1)
- Mask aligner (1)
- Mask-Aligner (1)
- Mask-Aligner lithography simulation (1)
- Materialbearbeitung, Metallbearbeitung (1)
- Materials (1)
- Microbolometer (1)
- Micromachining (1)
- Microsphere lithography (1)
- Monitoring (1)
- Multimode interferece (1)
- Nanogap (1)
- Nickel (1)
- Noise measurement (1)
- OCT on-chip (1)
- OCT-spectrometer (1)
- Optical coupling (1)
- Optical crosstalk (1)
- Optical fiber sensors (1)
- Optical lithography (1)
- Optical losses (1)
- Optical measurements (1)
- Optical performance (1)
- Optical polarization (1)
- Optical properties (1)
- Optical refraction (1)
- Optical transmission systems (1)
- Optiwave photonic tool (1)
- Optiwave software tool (1)
- PICs (1)
- PON (1)
- Painless treatment (1)
- Passivation (1)
- Phosphor sheets (1)
- Photonic crystal (1)
- Photonics Explorer (1)
- Photonics integrated circuit (1)
- Photoresist (1)
- Photoresist calibration (1)
- Physics - Optics (1)
- Picosecond laser ablation (1)
- Picosecond-neodymium-vanadate laser (1)
- Polycrystalline diamond (1)
- Polymer AWG (1)
- Polymer based optical splitters (1)
- Propagation losses (1)
- Protocols (1)
- Proximity printing (1)
- Quantum Dots (1)
- Quantum Optics (1)
- Quantum dot lasers (1)
- Quantum dots (1)
- Quantum state tomography (1)
- R-soft photonic tool (1)
- Resists (1)
- S-Bend (1)
- SPR 955-CM (1)
- Scanning electron microscopy (1)
- Schottky diodes (1)
- Second harmonic generation (1)
- Second harmonic seeding (1)
- Semiconducting metal oxide (1)
- Semiconductor lasers (1)
- Semiconductor quantum dots (1)
- Sensing applications (1)
- Sensitivity (1)
- Sensor (1)
- Sensors (1)
- Shape (1)
- Si3N4 (1)
- Si3N4 based AWG spectrometer (1)
- Si3N4 based AWGs (1)
- Si3N4 waveguides (1)
- SiC MEMS (1)
- SiC substrates (1)
- SiN Photonics (1)
- SiN passive optical components (1)
- SiNx thin films (1)
- Silicon carbide (1)
- Simultaneous irradiation (1)
- Spectral multiplex (1)
- Splitter design (1)
- SrTiO3 single crystals (1)
- Steel (1)
- Strain tuning (1)
- Substrates (1)
- Subwavelength structures (1)
- Surface roughness (1)
- Surfaces (1)
- TM-polarized light (1)
- Telekommunikation (1)
- Temperature (1)
- Temperature Dependency (1)
- Temperature characterization (1)
- Temperature measurement (1)
- Temperature stability (1)
- Terahertz radiation (1)
- Two color excitation (1)
- UV laser ablation (1)
- Ultra-Dense WDM (1)
- Ultra-short pulse laser (1)
- Ultrashort laser pulses (1)
- Ultrashort pulses microfabrication (1)
- WDM-PON system (1)
- Waveguide photonic building blocks s (1)
- Wavelength measurement (1)
- Wet etching (1)
- X-rays (1)
- XG-PON access networks (1)
- Y-branch optical splitter (1)
- Y-branch waveguide shape modelling (1)
- ablation (1)
- absorption spectra (1)
- access network (1)
- active magnetic bearings (1)
- alignment marks (1)
- aluminium compounds (1)
- asymmetric splitting ratio (1)
- autonomous vehicle (1)
- background noise (1)
- backside damaging (1)
- beam propagation method (1)
- bubble detection (1)
- bubble dynamics (1)
- carbon (1)
- carbon allotropes (1)
- carbon nanotubes (1)
- colourless 8-channel AWG (1)
- colourless AWG (1)
- commercial photonics software tool (1)
- commercial photonics tools (1)
- concept (1)
- configurations (1)
- confined ablation (1)
- confined laser ablation (1)
- cyclic AWG (1)
- design (1)
- design and simulation (1)
- direct laser writing lithography (1)
- dual plasma (1)
- dynamics (1)
- e-beam lithography (1)
- elastic constants (1)
- electrochemical biosensor (1)
- electron beam lithography (1)
- electron-beam direct-write (1)
- epitaxial heterostructures (1)
- femtosecond laser ablation (1)
- femtosecond laser ablation technique (1)
- femtosecond laser processing (1)
- femtosecond-laser (1)
- fiber array (1)
- frequency 10 GHz (1)
- friction (1)
- gallium compounds (1)
- gas sensing (1)
- geomagnetic activity (1)
- greenhouse (1)
- hard tissue (1)
- harsh environment (1)
- high channel Y-branch splitter (1)
- high channel count AWG (1)
- high electron mobility transistors (1)
- high index contrast AWG (1)
- high-index contrast AWG (1)
- information and communication technology (1)
- laser microtexturing (1)
- laser writing optical lithography (1)
- lift-off free (1)
- light polarisation (1)
- light propagation (1)
- light transmission (1)
- low loss 1×64 y-branch splitter (1)
- low-index 8-channel optical demultiplexer (1)
- material optimization (1)
- mechatronics (1)
- medical diagnostic imaging applications (1)
- metal (1)
- microelectromechanical systems (1)
- micromechanic structures fabrication (1)
- microscopy (1)
- microsensors (1)
- miniaturization (1)
- modelling (1)
- multimode interference splitter (1)
- multiplexing equipment (1)
- nanogap (1)
- nanostructures (1)
- narrow channel spacing AWG (1)
- nonlinear dynamics (1)
- oa (1)
- optical coherence tomography (1)
- optical communication systems (1)
- optical datatransmissison (1)
- optical design (1)
- optical design techniques (1)
- optical fibre losses (1)
- optical fibre networks (1)
- optical gas sensors (1)
- optical multiplexers//demultiplexers (1)
- optical noise (1)
- optical power splitter (1)
- optical splitters (1)
- optical switch (1)
- optical transmission systems (1)
- optimisation (1)
- packaging (1)
- parametric excitation (1)
- passive optical networks (1)
- photolithography (1)
- photonic integrated circuit (1)
- photonic integrated circuits (1)
- photonics chip butt coupling (1)
- photonics integrated circuit (1)
- photonics integrated circuits (1)
- plasmapause (1)
- polarization dependent loss. (1)
- polymer (1)
- power splitter (1)
- process monitoring (1)
- redox cycling (1)
- rib waveguide (1)
- ridge waveguide (1)
- ridge waveguides (1)
- rotor dynamics (1)
- rotordynamics (1)
- sensor (1)
- silica based AWG designs (1)
- silicon laser ablation (1)
- simulated transmission characteristics (1)
- small footprint (1)
- solar wind (1)
- spectral domain OCT (1)
- split power (1)
- splitter (1)
- splitting properties (1)
- sputter etching (1)
- stand-alone software tool (1)
- surface characterization (1)
- symmetric splitting ratio (1)
- temperature sensitivity of parameters (1)
- tool design (1)
- tribological characterization (1)
- two-dimensional morphology (1)
- two-temperature model (1)
- ultra-DWDM (1)
- ultra-dense wavelength division multiplexing (1)
- ultra-short pulsed laser (1)
- ultrafast laser (1)
- ultrashort pulse laser (1)
- waveguide structure (1)
- waveguide tapers (1)
- waveguides (1)
- wavelength 850 nm (1)
- wear (1)
- wide band gap semiconductors (1)
We have investigated the ablation behaviour of single crystal SrTiO3 <100> with focus on the influence of the pulse duration at a wavelength of 248 nm. The experiments were performed with KrF-excimer lasers with pulse durations of 34 ns and 500 fs, respectively. Femtosecond-ablation turns out to be more efficient by one order of magnitude and to eliminate the known problem of cracking of SrTiO3 during laser machining with longer pulses. In addition, the cavities ablated with femtosecond pulses display a smoother surface with no indication of melting and well-defined, sharp edges. These effects can be explained by the reduced thermal shock effect on the material by using ultrashort pulses.
The properties of diamond make it an attractive material for MEMS and sensor devices. We present the feasibility to fabricate membranes and cantilevers made of nano-(micro-) crystalline diamond films grown on Si/SiO2 substrates using microwave chemical vapour deposition (MWCVD). The patterning of micromechanical structures was performed by a combined process of femtosecond laser ablation and wet etching. We designed cantilever structures with varying lengths and widths (25, 50, 100, 200 and 300 μm). The cantilevers were made in a symmetric left- and right-hand configuration. An additional laser treatment was used to modify the mechanical properties of the left-hand cantilever. The deflection of the laser-treated, and non-treated sections was measured. The global mechanical system properties were simulated and corresponded with high accuracy to the measured results of deflection.
The properties of SiC and diamond make them attractive materials for MEMS and sensor devices. We innovated specific laser ablation techniques to fabricate membranes and cantilevers made of SiC or nano-(micro-) crystalline diamond films grown on Si/SiO2 substrates by microwave chemical vapour deposition (MWCVD). We started research to generate surface moulds to grow corrugated diamond films for membranes and cantilevers. A software tool was developed to support the design of micromechanical cantilevers. We can measure deformation and resonant frequency of diamond cantilevers and identify the global mechanical properties. A benchmark against finite element simulations enables an inverse identification of the specific system parameters and simplifies the characterization procedure.
Femtosecond laser ablation on Si generates 2D ripple structures, known as laser induced periodic surface structures (LIPSS) and pinholes. We fabricated membranes with 20 to 50 μm thickness perforated by an array of tapered pinholes up to 5 μm in diameter and 10 to 20 μm spacing. Within several micrometer the pinholes transform into hollow photonic waveguides with constant diameter from 1μm to 2μm. Such structures offer a 3D photonic coupling device for polymer Y-branch- and MMI-splitter. We measured a considerable change of electrical resistivity for 500 ppm H2 in air using Si/SiO2/TiO2 substrates with 2D LIPSS. We propose to investigate 3D waveguide arrays also for photonic-chemical sensors.
By a simple femtosecond laser process, we fabricated metal-oxide/gold composite films for electrical and optical gas sensors. We designed a dripple wavelength AWG-spectrometer, matched to the plasma absorption wavelength region of the composite films. H2/CO absorptions fit well with the AWG design for multi gas detection sensor arrays
Black titanium dioxide in situ generated on femtosecond laser induced periodic surface structures
(2018)
Semiconducting metal oxides are widely used for solar cells, poto-catalysis, bio-active materials and gas sensors. Besides the material properties of the used semiconductor,the specific surface topology of the sensor determines the device performance. We investigate the preparation and transfer suitable metals onto LIPPS structures on glass for gas sensing applications.
Oral applications of ultra-short laser pulses - a new approach for gentle and painless treatment?
(2006)
The utilization of lasers in dentistry expands greatly in recent years. For instance, fs-lasers are effective for both drilling and caries prevention, while cw-lasers are useful for adhesive hardening. A cutting-edge application of lasers in dentistry is the debonding of veneers. While there are pre-existing tools for this purpose, there is still potential for improvement. Initial efforts to investigate laser assisted debonding mechanisms with measurements of the optical and mechanical properties of teeth and prosthetic ceramics are presented. Preliminary tests conducted with a laser system used for debonding that is commercially available showed differences in the output power set at the systems console to that at specified distances from the handpiece. Furthermore, the optical properties of the samples (human teeth and ceramics) were characterised. The optical properties of the ceramics should closely resemble those of teeth in terms of look and feel, but they also influence the laser assisted debonding technique and thus must be taken into account. In addition first attempts were performed to investigate the mechanical properties of the samples by means of pump-probe-elastography under a microscope. By analyzing the sample surface up to 20 ns after a fs-laser pulse impact, pressure and shock waves could be detected, which can be utilized to determine the elastic constants of specific materials. Together such investigations are needed to shape the basis for a purely optical approach of debonding of veneers utilizing acoustic waves.
Over the last years, polymers have gained great attention as substrate material, because of the possibility to produce low-cost sensors in a high-throughput manner or for rapid prototyping and the wide variety of polymeric materials available with different features (like transparency, flexibility, stretchability, etc.). For almost all biosensing applications, the interaction between biomolecules (for example, antibodies, proteins or enzymes) and the employed substrate surface is highly important. In order to realize an effective biomolecule immobilization on polymers, different surface activation techniques, including chemical and physical methods, exist. Among them, plasma treatment offers an easy, fast and effective activation of the surfaces by micro/nanotexturing and generating functional groups (including carboxylic acids, amines, esters, aldehydes or hydroxyl groups). Hence, here we present a systematic and comprehensive plasma activation study of various polymeric surfaces by optimizing different parameters, including power, time, substrate temperature and gas composition. Thereby, the highest immobilization efficiency along with a homogenous biomolecule distribution is achieved with a 5-min plasma treatment under a gas composition of 50% oxygen and nitrogen, at a power of 1000 W and a substrate temperature of 80 C. These results are also confirmed by different surface characterization methods, including SEM, XPS and contact angle measurements.
Production and tribological characterization of tailored laser-induced surface 3D microtextures
(2019)
Silicon nanophotonics
(2013)
Investigations on mechanical stability of laser machined optical fibre tips for medical application
(2019)
Light delivery is a challenging task, when it comes to medical applications. The light is guided through optical fibers from the light source towards the treatment region. In case of interstitial light application, the light has to be decoupled from the fibre and spread to the surrounding tissue. To reach larger tissue volumes, this can be either obtained by adding a scattering volume to the tip of the fibre, or by directly modifying the optical fibre itself in order to break the total reflection within the fibre core. Such modifications can be either on the fibre surface itself or internally in the fibre core. One approach to obtain the fibre structuring could be laser induced surface roughening using an ultrafast laser source. While using volume scattering as diffusor at the fibre tip is currently the gold standard for non-thermal applications (< 0.3W/cm), the decoupling of high power laser intensities for thermal treatment options is still challenging. Structuring the fibre core itself usually is related with a loss of mechanical stability. As fibre breakage and potential loss within the human body can have serious consequences, the mechanical stability is one of the quality criterion in diffuser manufacturing. Therefore, investigations about the mechanical stability of laser manufactured optical fibre diffusers are needed.
In order to evaluate the mechanical stability, a 4-point as well as a 2-point breaking test were developed. Different fibre diffusers, based on volume or surface scattering, were manufactured using fs-laser ablation techniques and its breaking strengths were investigated.
It could be shown that for surface fibre modifications, the mechanical stability reduces with increasing defect depth. The stability significantly drops when the laser ablation was performed in the thermal energy range. Volume scattering modified fibres only showed a slight reduction in stability compared to un-machined fibres.
In conclusion, internal fibre modification seems to be the most promising method to establish optical fibre diffusers, which are capable of several watts of emission power, while preserving its mechanical strength.
Ultrafast-laser manufacture of radially emitting optical fiber diffusers for medical applications
(2018)
Interstitial photodynamic therapy (iPDT) treats malignant brain cancer cells by irradiation with low power laser light. The light is guided into the human body by diffuse emitting fibers. This study targets the light distribution of optical diffusers within the brain tissue. It was shown, that by submerging an optical diffuser into human brain phantom, its radiation profile measured in air converges towards a Gaussian distribution with increasing phantom depth. A camera method using digital averaging filters as well as an integrating sphere setup, both, smoothing the diffuser radiation profile were applied onto the evaluated diffuser.
Investigation of non-uniformly emitting optical fiber diffusers on the light distribution in tissue
(2020)
In recent years, ultrashort pulsed lasers have increased their applicability for industrial requirements, as reliable femtosecond and picosecond laser sources with high output power are available on the market. Compared to conventional laser sources, high quality processing of a large number of material classes with different mechanical and optical properties is possible. In the field of laser cutting, these properties enable the cutting of multilayer substrates with changing material properties. In this work, the femtosecond laser cutting of phosphor sheets is demonstrated. The substrate contains a 230 micrometer thick silicone layer filled with phosphor, which is embedded between two glass plates. Due to the softness and thermal sensitivity of the silicone layer in combination with the hard and brittle dielectric material, the separation of such a material combination is challenging for both mechanical separation processes and cutting with conventional laser sources. In our work, we show that the femtosecond laser is suitable to cut the substrate with a high cutting edge quality. In addition to the experimental results of the laser dicing process, we present a universal model that allows predicting the final cutting edge geometry of a multilayer substrate.
In this paper, a 256-channel, 10-GHz arrayed waveguide gratings demultiplexer for ultra-dense wavelength division multiplexing was designed using an in-house developed tool called AWG-Parameters. The AWG demultiplexer was designed for a central wavelength of 1550 nm and the structure was simulated in PHASAR tool from Optiwave. Two different AWG designs were developed and the influence of the design parameters on the AWG performance was studied.
We present 256-channel, 25-GHz AWG designed for ultra-dense wavelength division multiplexing. For the design two in-house developed tools were used: AWG-Parameters tool for the calculation of input design parameters and AWGAnalyser tool, used to evaluate the simulated transmission characteristics. The AWG structure was designed for AWG central wavelength of 1550 nm and simulated with PHASAR tool from Optiwave. To keep the size of AWG structure as small as possible the number of waveguides in the phased array was tested. The simulations show that there is a certain minimum number of phased array waveguides necessary to reach sufficient AWG performance. After optimization, the AWG structure reached 10 cm x 11 cm in size and satisfying optical properties.
Arrayed Waveguide Grating (AWG) is a passive optical component, which have found applications in a wide range of photonic applications including telecommunications and medicine. Silica-on-Silicon (SoS) based AWGs use a low refractive-index contrast between the core (waveguide) and the cladding which leads to some significant advantages such as low propagation losses and low fiber coupling losses between the AWG waveguides and the fibres. Therefore, they are an attractive DWDM solution offering higher channel count technology and good performance characteristics compared to other methods. However, the very low refractive-index contrast means the bending radius of the waveguides needs to be very large (on the order of several millimeters) and may not fall below a particular critical value to suppress bending losses. As a result, silica-based waveguide devices usually have a very large size that limits the integration density of SiO2-based photonic integrated devices. High-index contrast AWGs (such as silicon, silicon nitride or polymer-based waveguide devices) feature much smaller waveguide size compared to low index contrast AWGs. Such compact devices can easily be implemented on a chip and have already found applications in emerging applications such as optical sensors, devices for DNA diagnostics and optical spectrometers for infrared spectroscopy.In this work, we present the design, simulation, technological verification and applications of both, the low-index contrast and high-index contrast AWGs. For telecommunication applications AWG-MUX/Demux with up to 128-channels will be presented. For medical applications the AWG-spectrometer with up to 512-channels will be presented.This work was carried out in the framework of the projects: ADOPT No. SK-AT-20-0012, NOVASiN No. SK-AT-20-0017 and AUTOPIC No. APVV-17-0662 from Slovak research and development agency of Ministry of Education, Science, Research and Sport of the Slovak Republic and No. SK 07/2021 and SK 08/2021 from Austrian Agency for International Cooperation in Education and Research (OeAD-GmbH); and project PASTEL, no. 2020-10-15-001, funded by SAIA.
We present design, simulation and optimization of polymer based 16-channel, 100-GHz AWG designed for central wavelength of 1550 nm. The input design parameters were calculated applying AWG-Parameters tool. The simulations were performed applying a commercial photonic tool PHASAR from Optiwave. The achieved transmission characteristics were evaluated by AWG-Analyzer tool and show a satisfying agreement between designed and simulated AWG optical properties. Finally, the influence of the number of phased array (PA) waveguides on the AWG performance was studied. The results show that there is a certain minimum number of PA waveguides necessary to reach sufficient AWG performance.
We present design of planar 16-channel, 100-GHz multi-mode polymer-based AWG. This AWG was designed for central wavelength of 1550 nm applying AWG-Parameters tool. The AWG structure was created and simulated in the commercial photonic tool PHASAR from Optiwave. Achieved transmission characteristics were evaluated by AWG-Analyzer tool. For the design, multi-mode waveguides having a cross-section of (4x4) µm2 were used. The simulated results show strong worsening of the transmission characteristics in comparison when using single-mode waveguides. Nevertheless, the transmitting channels are clearly separated. The reason for using thicker multi-mode waveguides in the design is possibility to fabricate the AWG structure on polymer basis using direct laser writing lithography.
In this work, we investigated the influence of different etch depths of the rib waveguides on the performance of SiN-based AWGs. For this purpose, an 8-channel 100 GHz AWG was designed for a center wavelength of 850 nm. The design parameters entered were calculated using the AWG-Parameters tool. The simulations were performed with a commercial photonic tool PHASAR from Optiwave. The simulated performance was evaluated using the AWG-Analyzer tool. For the AWG design, we used three identical rib waveguides with different etch depths to simulate possible etch imperfection. The simulations show the wavelength shift and degradation of the AWG performance.
In this paper we present various educational activities with Photonics Explorer, an educational kit developed by the photonics research team B - PHOT at VUB (Vrije Universiteit Brussel) for students at secondary schools. The concept is a ‘lab-in-a-box’ that enables students of the 2 nd and 3 rd grade to do photonics experiments themselves at school with lasers, LEDs, lenses, optical fibers, and other high-tech components. Even though, the kit was developed for the secondary schools, we use experiments from the kit also for some other teaching activities such as lectures at the university, photonics workshops for teachers and children at primary/secondary schools or for events such as children's/youth's university or the night of sciences. In the frame of Austrian based project Phorsch! we have organized most of these activities which will be presented here.
We present the technological verification of a size-optimized 160-channel, 50-GHz silicon nitride-based AWG-spectrometer. The spectrometer was designed for TM-polarized light with a central wavelength of 850 nm applying our proprietary “AWG-Parameters” tool. For the simulations of AWG layout, the WDM PHASAR photonics tool from Optiwave was used. The simulated results show satisfying optical properties of the designed AWG-spectrometer. However, the high-channel count causes a large AWG size with standard design approaches. To solve this problem we designed a special taper enabling the reduction of AWG structure by about 15% while keeping the same optical properties. The AWG design was fabricated and the measured spectra not only confirm the proposed size-reduction but also the improvement of optical properties of the size-optimized AWG.
Compact and high-resolution 256-channel silicon nitride based AWG-spectrometer for OCT on a chip
(2019)
We present design, simulation and technological verification of a compact 256-channel, 42-GHz silicon nitride based AWG-spectrometer. The spectrometer was designed for TM-polarized light with a central wavelength of 850 nm, applying “AWG-Parameters” tool. This design is based on a previous study of various AWG designs (8-channel, 100-GHz; 20-channel, 50-GHz; 40-channel, 50-GHz, 80-channel, 50-GHz and 160-channel, 50-GHz AWGs), which were all technologically verified. The spectrometer features small size and high resolution. It is integrated on OCT chip using standard CMOS processes. The SD-OCT system is developed to operate in a wavelength range from 800 nm to 900 nm, having 0.1 nm resolution.
Calculation of accurate channel spacing of an AWG optical demultiplexer applying proportional method
(2015)
Comparison of silicon nitride based 8-channel 100-GHz AWGs applying different waveguide structures
(2019)
This paper presents design and simulation of 8-channel, 100-GHz AWGs based on Si/SiO2/SiN/SiOx material platform. For the designs, two different waveguide structures were used, i.e. ridge and rib waveguides. AWGs were designed for central wavelength of 850 nm applying AWG-Parameters tool. The simulations were performed applying FEM and BPM methods in RSoft and PHASAR photonic tools. The simulation results show considerably lower losses but slightly higher channel crosstalk when applying rib waveguides.
Introducing 3D sub-micrometer technologies based on polymers opened new possibilities of design and fabrication of photonic devices and components in 3D arrangement. 3D laser lithography is direct writing process based on two photon polymerization exhibiting high accuracy and versatility, where numerous resists and even polymer ceramic mixtures can be used. We present design and simulation of polymer based photonic components with a focus on arrayed waveguide gratings (AWG) based on optical multiplexers/demultiplexers and optical splitters. All optical components were designed for 1550 nm operating wavelength, applying two commercial photonics tools. This study creates a basis for the design of optical components in 3D arrangement, which will be fabricated by 3D laser lithography.
Application of various tools to design, simulate and evaluate optical demultiplexers based on AWG
(2015)
Comparison of silicon nitride based 1x8 Y-branch splitters applying different waveguide structures
(2019)
This paper presents design, simulation and optimization of 1x8 Y-branch power splitters based on Si/SiO2/SiN/SiOx material platform. For the designs, two different waveguide structures were used, i.e. ridge and rib waveguides. The splitters were designed for 850 nm spectral optical window and the simulations were performed applying FEM and BPM methods in RSoft photonic tool. The aim of this work was to find minimum physical dimensions of the designed splitters occupying minimal space on PIC chip. The optimization was done with regards to high symmetrical splitting ratio and low insertion loss. Finally, the optical properties of both splitters were studied and compared with each other.
Optical splitters are passive optical components, which have found applications in a wide range of telecom, sensing, medical and many other scientific areas.
Low-index contrast optical splitters (Silica-on-Silicon (SoS) based waveguide devices) feature many advantages such as low fiber coupling losses and low propagation losses. They are considered an attractive DWDM solution in the telecommunication for all optical signal processing in optical communication systems. Nowadays the steadily increasing data volume in communication networks is driven by a rapid proliferation of home-based and business computers, storage capacities, processing capabilities and the extensive availability of Internet. The challenge is to transfer high data volumes in short periods of time over high distances as lossless as possible. The task of the optical splitters in Fiber-to-the-x (FTTx) network is to split one optical signal in many identical signals bringing for example the same TV signal in different households. Of course, the more buildings can be served by one optical splitter the lower are the installation costs.
High-index contrast optical splitters (such as silicon, silicon nitride or polymer based waveguide devices) feature much smaller waveguide size compared to low index contrast splitters. Such compact devices can easily be implemented on-chip and have already been used in the development of optical sensors, devices for DNA diagnostics and for infrared spectroscopy.
We will present the latest achievements in the design of two mostly used optical splitters (MMI and Y-branch) and discuss their advantages and disadvantages. Finally, some applications of the splitters developed in the frame of various projects will be presented.
This work was carried out in the framework of the project PHOCOP (no. SK-AT-2017-0013) and NAMOPRISIN (no. SK-AT-2017-0005) from the Slovak research and development agency of the Ministry of Education, Science, Research and Sport of the Slovak Republic and SK 16/2018 and 15/2018 from OeAD-GmbH.
Today, optics and photonics is widely regarded as one of the most important key technologies for this century. Many experts even anticipate that the 21st century will be century of photon much as the 20th century was the century of electron. Optics and photonics technologies affect almost all areas of our life and cover a wide range of applications in science and industry, e.g. in information and communication technology, in medicine, life science engineering as well as in energy and environmental technology. However even so attractive, the photonics is not well known by most people. To motivate especially young generation for optics and photonics we worked out a lecture related to the “light” for children aged eight to twelve years. We have prepared many experiments to explain the nature of light and its applications in our everyday life. Finally, we focused on the optical data transmission, i.e. how modern communication over optical networks works. To reach many children at home we recorded this lecture and offered it as a video online in the frame of children’s university at Vorarlberg University of Applied Sciences. By combining the hands-on teaching with having a fun while learning about the basic optics concepts we aroused interest of many children with a very positive feedback.
Design and simulation of 128-channel 10 GHz AWG for ultra-dense wavelength division multiplexing
(2012)
Arrayed Waveguide Gratings
(2016)
In this paper, low-loss Y-branch splitters up to 128 splitting ratio are designed, simulated, and optimized by using 2D beam propagation method in OptiBPM tool by Optiwave. For an optical waveguide, a silica-on-silicon material platform is used. The splitters were designed as a planar structure for a telecommunication operating wavelength of 1.55 m. According to the minimum insertion loss and minimum non-uniformity, the optimum length for each Y-branch is determined. The influence of the pre-defined S-Bend waveguide shapes (Arc, Cosine, Sine) and of the waveguide core size reduction on the splitter performance has been also studied. The obtained simulation results of all designed splitters with different S-Bend shape waveguides together with the different waveguide core sizes are discussed and compared with each other.
In this paper, design of 1×8 multimode interference passive optical splitter is proposed. The structure of the splitter is designed based on a silicon nitride material platform. This work aims to find the minimum physical dimensions of the designed splitters with the satisfactory optical performance. According to the minimum insertion loss and minimum non-uniformity, the optimum length of the splitters is determined.
This paper presents the design, simulation, and optimization of a 1×128 multimode interference (MMI) splitter with a silica-on-silicon channel profile. This work aims to study the influence of the different S-Bend output waveguide shapes at the end of the MMI coupler on the final optical properties. The 1×128 MMI splitters have been simulated using beam propagation method in OptiBPM software. The optical properties of all considered splitters with different shapes of outputs waveguides are discussed and compared with each other. Based on the minimum insertion loss and non-uniformity, the final shape of output waveguides, ensuring the lowest losses, is determined.
This paper aims to study the design, simulation, and optimization of low-loss Y-branch passive optical splitters up to 64 output ports for telecommunication applications. For a waveguide channel profile, the standard material silica-on-silicon is used. The Y-splitters are designed and simulated at telecommunication operating wavelength, λ = 1550 nm. Except for the lengths of the used Y-branches, and a core size of the waveguides, design parameters such as port pitch between the waveguides and simulation parameters for all splitters are considered fixed. The simulation results are analyzed to determine the optimum length of the splitters and the optimum core size. Based on this optimization the total length of the highest designed 1×64 Y-branch splitter was reduced by 41.14 % for a waveguide core (5×5) μm2 compared to the length of splitter with a standard (6×6) μm2 core size.