Refine
Year of publication
Document Type
- Article (439)
- Conference Proceeding (394)
- Part of a Book (230)
- Book (106)
- Report (28)
- Other (16)
- Doctoral Thesis (14)
- Working Paper (9)
- Master's Thesis (4)
- Part of Periodical (4)
Institute
- Wirtschaft (347)
- Forschungszentrum Mikrotechnik (240)
- Technik | Engineering & Technology (192)
- Forschungszentrum Business Informatics (167)
- Department of Computer Science (Ende 2021 aufgelöst; Integration in die übergeordnete OE Technik) (164)
- Soziales & Gesundheit (141)
- Forschungsgruppe Empirische Sozialwissenschaften (116)
- Forschungszentrum Human Centred Technologies (101)
- Forschungszentrum Energie (85)
- Didaktik (mit 31.03.2021 aufgelöst; Integration ins TELL Center) (68)
Is part of the Bibliography
- yes (1248) (remove)
Keywords
- Social Work (18)
- Organizational Studies, Economic Sociology (17)
- Social Structure, Social Inequality (17)
- Laser ablation (11)
- Soziale Arbeit (11)
- Y-branch splitter (11)
- arrayed waveguide gratings (11)
- +KDC 122 (9)
- Design : Theorie, Reflexion (9)
- photonics (8)
Bubble columns are recently used for the humidification of air in water treatment systems and fuel cells. They are well applicable due to their excellent heat and mass transfer and their low technical complexity. To design and operate such devices with high efficiency, the humidification process and the impact of the operating parameters need to be understood to a sufficient degree. To extend this knowledge, we use a refined and novel method to determine the volumetric air–liquid heat and mass transfer coefficients and the humidifier efficiency for various parametric settings. The volumetric transfer coefficients increase with both of the superficial air velocity and the liquid temperature. It is further shown that the decrease of vapor pressure with an increase of the salinity results in a corresponding decrease in the outlet humidity ratio. In contrast to previous studies, liquid heights smaller than 0.1 m are investigated and significant changes in the humidifier efficiency are seen in this range. We present the expected humidifier efficiency with respect to the superficial air velocity and the liquid height in an efficiency chart, such that optimal operating conditions can be determined. Based on this efficiency chart, recommendations for industrial applications as well as future scientific challenges are drawn.
The production of liquid-gas dispersions places high demands on the process technology, which requires knowledge of the bubble formation mechanisms, as well as the phase parameters of the media combinations used. To obtain the bubble sizes introduced to a flow not knowing the phase parameters, different process parameters are investigated. Their quality and applicability are evaluated. The results obtained make it possible to simplify long design processes of dispersion processes in manufacturing plants and to ensure the product quality of the products manufactured, by reducing waste.
Violation-mitigation-based method for PV hosting capacity quantification in low voltage grids
(2022)
Hosting capacity knowledge is of great importance for distribution utilities to assess the amount of PV capacity possible to accommodate without troubling the operation of the grid. In this paper, a novel method to quantify the hosting capacity of low voltage grids is presented. The method starts considering a state of fully exploited building rooftop solar potential. A downward process is proposed - from the starting state with expected violations on the grid operation to a state with no violations. In this process, the installed PV capacity is progressively reduced. The reductions are made sequentially and selectively aiming to mitigate specific violations: nodes overvoltage, lines overcurrent and transformer overloading. Evaluated on real data of fourteen low voltage grids from Austria, the method proposed exhibits benefits in terms of higher hosting capacities and lower computational costs compared to stochastic methods. Furthermore, it also quantifies hosting capacity expansions achievable by overcoming the effect of the violations. The usage of a potential different from solar rooftops is also presented, demonstrating that a user-defined potential allows to quantify the hosting capacity in a more general setting with the method proposed.
A new software tool, called AWG-Channel-Spacing, is developed to calculate accurate channel spacing of an arrayed waveguide gratings (AWG) optical multiplexer/demultiplexer. This tool has been developed with the application framework QT in the programming language C++. The tool was evaluated with a design of 20-channel 200 GHz AWG. The achieved simulated transmission characteristics prove the correct functionality of the tool.
Sie werden beobachtet
(2022)
Wahrheit braucht Vertrauen
(2022)
Die Arbeitswelt von morgen
(2022)
This paper describes two different designs of 1×8 passive optical splitters. The first splitter consists of cascade arranged directional waveguide branches (Y-branch splitter) with (0.8×0.16) µm2 waveguide cross-section. The second splitter is based on multimode interference occurring in a large MMI coupler, which uses a self-imaging effect for beam propagation, exhibiting the same waveguide core size as a Y-branch splitter. The waveguide channel profile, used in both approaches, is based on a silicon nitride material platform, with a refractive index of core being nc = 1.925 and a refractive index of cladding ncl = 1.4575. The splitters are designed as a planar structure for a medical operating wavelength 850 nm. Design, simulation, and optimization of passive optical components are performed by a commercial photonic software tool BeamPROP simulation engine by RSoft Photonics Suite tool, employing beam propagation method. This work aims to find the minimum physical dimensions of the designed splitters with the satisfactory optical performance. According to the minimum insertion loss and minimum non-uniformity, the optimum length of the splitters is determined. Finally, the optical properties of splitters for both approaches are discussed and compared with each other.
Smart services disrupt business models and have the potential to stimulate the circular economy transition of regions, enabling an environmentally friendly atmosphere for sustainable and innovation-driven growth of regions. Although smart services are powerful means for deploying circular economy goals in industrial practices, there is little systematic guidance on how the adoption of smart services could improve resource efficiency and stimulate smart regional innovation-driven growth, enabled through circular design. Implemented in the scope of Vorarlberg’s smart specialization strategy, this paper contributes to the literature on the circular economy and regional innovation-driven growth by assessing critical factors of the value creation and value capture implemented within the scope of the quadruple helix system. By identifying the main challenges and opportunities of collaborative value creation and value capture in setting-up smart circular economy strategies and by assessing the role of innovation actors within the quadruple helix innovation system, the study provides recommendations and set of guidelines for managers and public authorities in managing circular transition. Finally, based on the analysis of the role of actors in creating shared value and scaling-up smart circular economy practices in the quadruple helix innovation systems, the paper investigates the role of banks as enablers of circular economy innovation-driven regional growth and smart value creation.
A new software tool, called AWG-Wuckler, is developed to calculate geometric parameters of arrayed waveguide grating structures for telecommunication and medical applications. These parameters are crucial for a AWG layout which will be created and simulated using commercial photonic design tools. The design process of AWG is very complex because its geometric dimensions depend on a large number of input design parameters and other input design parameters. Often geometric constraints require an adjustment of the input design parameters and vice versa. Calculation and adjustment of the geometric parameters is a time-consuming process that is currently not fully supported by any commercial photonic tool. AWG-Wuckler tool overcomes this issue and offers a fast and easy to use solution. The tool was already applied in various AWG designs and is technologically well proven.
Traditional power grids are mainly based on centralized power generation and subsequent distribution. The increasing penetration of distributed renewable energy sources and the growing number of electrical loads is creating difficulties in balancing supply and demand and threatens the secure and efficient operation of power grids. At the same time, households hold an increasing amount of flexibility, which can be exploited by demand-side management to decrease customer cost and support grid operation. Compared to the collection of individual flexibilities, aggregation reduces optimization complexity, protects households’ privacy, and lowers the communication effort. In mathematical terms, each flexibility is modeled by a set of power profiles, and the aggregated flexibility is modeled by the Minkowski sum of individual flexibilities. As the exact Minkowski sum calculation is generally computationally prohibitive, various approximations can be found in the literature. The main contribution of this paper is a comparative evaluation of several approximation algorithms in terms of novel quality criteria, computational complexity, and communication effort using realistic data. Furthermore, we investigate the dependence of selected comparison criteria on the time horizon length and on the number of households. Our results indicate that none of the algorithms perform satisfactorily in all categories. Hence, we provide guidelines on the application-dependent algorithm choice. Moreover, we demonstrate a major drawback of some inner approximations, namely that they may lead to situations in which not using the flexibility is impossible, which may be suboptimal in certain situations.
Hallo. Ich bin Lio.
(2022)
Von Assistenzrobotern im Pflegebereich erhofft man sich Unterstützung in vielfacher Weise: Sie sollen zur Erleichterung für das Pflegepersonal führen (z.B. durch Handreichung von Gegenständen), mehr Sicherheit bringen (z.B. indem sie Nachschauen, sobald Auffälliges registriert wird) und zu einem gesunden Altern (z.B. körperliche Aktivierung) und zu mehr Teilhabe (z.B. psychosoziale Aktivierung) beitragen. Ihre Funktionen versprechen daher einerseits Assistenz für Pflege- und Betreuungspersonal (z.B. Transport- und Serviceaufgaben) und andererseits soziale Assistenz für Senior:innen in Pflegesituationen (z.B. Unterhaltung, Aktivierung).
In dem Projekt PUR (Pflegeunterstützende Robotik) wurde der Roboter Lio der Firma F&P Robotics AG über einen Zeitraum von 22 Monaten in Wohnbereichen in zwei Pflegeeinrichtungen in Konstanz und Schaffhausen getestet und situationsangepasst weiterentwickelt. Mit Unterstützung des Personals und der Bewohner:innen vor Ort wurde Lio anhand der Kriterien Usability, User Experience, Akzeptanz sowie seinen Nutzen für die Organisation evaluiert. Neben den Befragungen der Akteur:innen in den beiden Einrichtungen erfolgte eine systematische Erfassung und Analyse von Informationen und Daten anhand von Logfiles und Dokumenten in welchen Nutzungsdauer und -häufigkeit sowie Fehlerraten erfasst wurden.
Es wurde deutlich, dass Lio sich noch hinsichtlich aller Kriterien verbessern muss um die hohen Erwartungen bezüglich einer wahrnehmbaren Entlastung des Pflegepersonals bei gleichzeitiger Aufrechterhaltung oder Verbesserung der Lebensqualität der Bewohner:innen erfüllen zu können. Als Schlüsselfunktion für eine optimierte Usability und User Experience wird die Bedienbarkeit über Sprache betrachtet. Zum einen aus Sicht der Pflege- und Betreuungskräfte die Lio z.B. in hektischen Situationen in der Nachtschicht schnell und einfach in seinem Autonomiemodus (z.B. Desinfizieren von Türen) unterbrechen müssen. Zum anderen aus Sicht der Bewohner:innen die ihn ansprechen, aber nicht verstanden werden, womit das aktivierende Potential, das in Lio steckt, nicht ausgeschöpft wird.
Eine routinemäßige Einbindung von Assistenzrobotern wie Lio in die Pflege- und Betreuungspraxis erfordert neben der Lösung von technischen Problemen (wie zuverlässige Navigation, Sprachinteraktion) auch geeignete Beteiligungsansätze der Akteuer:innen. Diese sind so zu gestalten, dass nicht nur die technikaffinen Personen abgeholt werden, sondern allen ein entsprechendes Angebot gemacht wird, den Umgang mit dem technischen System zu erproben und in der Kontrolle und Bedienung Sicherheit zu erlangen.
Die befragten Akteur:innen sehen eine Zukunft für Assistenzroboter sofern sie autonom, zuverlässig und jederzeit gut kontrollierbar funktionieren und stehen dem digitalen Transformationsprozess in der Pflege größtenteils sehr offen gegenüber.
The impact of global warming and climate change has forced countries to introduce strict policies and decarbonization goals toward sustainable development. To achieve the decarbonization of the economy, a substantial increase of renewable energy sources is required to meed energy demand and to transition away from fossil fuels. However, renewables are sensitive to environmental conditions, which may lead to imbalances between energy supply and demand. Battery energy storage systems are gaining more attention for balancing energy systems in existing grid networks at various levels such as bulk power management, transmission and distribution, and for end-users. Integrating battery energy storage systems with renewables can also solve reliability issues related to transient energy production and be used as a buffer source for electrical vehicle fast charging. Despite these advantages, batteries are still expensive and typically built for a single application – either for an energy- or power-dense application – which limits economic feasibility and flexibility. This paper presents a theoretical approach of a hybrid energy storage system that utilizes both energy- and power-dense batteries serving multiple grid applications. The proposed system will employ second use electrical vehicle batteries in order to maximise the potential of battery waste. The approach is based on a survey of battery modelling techniques and control methods. It was found that equivalent circuit models as well as unified control methods are best suited for modelling hybrid energy storages for grid applications. This approach for hybrid modelling is intended to help accelerate the renewable energy transition by providing reliable energy storage.
In previous studies of linear rotary systems with active magnetic bearings, parametric excitation was introduced as an open-loop control strategy. The parametric excitation was realized by a periodic, in-phase variation of the bearing stiffness. At the difference between two of the eigenfrequencies of the system, a stabilizing effect, called anti-resonance, was found numerically and validated in experiments. In this work, preliminary results of further exploration of the parametric excitation are shared. A Jeffcott rotor with two active magnetic bearings and a disk is investigated. Using Floquet theory, a deeper insight into the dynamic behavior of the system is obtained. Aiming at a further increase of stability, a phase difference between excitation terms is introduced.
Bubble column humidifiers (BCHs) are frequently used for the humidification of air in various water treatment applications. A potential but not yet profoundly investigated application of such devices is the treatment of oily wastewater. To evaluate this application, the accumulation of an oil-water emulsion using a BCH is experimentally analyzed. The amount of evaporating water vapor can be evaluated by measuring the humidity ratio of the outlet air. However, humidity measurements are difficult in close to saturated conditions, as the formation of liquid droplets on the sensor impacts the measurement accuracy. We use a heating section after the humidifier, such that no liquid droplets are formed on the sensor. This enables us a more accurate humidity measurement. Two batch measurement runs are conducted with (1) tap water and (2) an oil-water emulsion as the respective liquid phase. The humidity measurement in high humidity conditions is highly accurate with an error margin of below 3 % and can be used to predict the oil concentration of the remaining liquid during operation. The measured humidity ratio corresponds with the removed amount of water vapor for both tap water and the accumulation of an oil-water emulsion. Our measurements show that the residual water content
in the oil-water emulsion is below 4 %.
Deep etched structures in GaAs with high aspect ratio have promising applications in optoelectronics and MEMS devices. The key factors in their fabrication process are the choosing of proper mask material and etching conditions which results in high selectivity and an anisotropic etch profile with smooth sidewalls. In this work, we studied several types of mask materials (Al, Ni, Cr, SiO2) for deep reactive ion etching of GaAs using inductively coupled plasma system. Thus, several sets of experiments were performed with varying gas mixture, pressure and ICP/RF power. As a result, we find optimized conditions and minimal thickness of mask material for achieving deep etched (>140 m) GaAs structures.
This paper aims to study the design, simulation, and optimization of low-loss Y-branch passive optical splitters up to 64 output ports for telecommunication applications. For a waveguide channel profile, the standard material silica-on-silicon is used. The Y-splitters are designed and simulated at telecommunication operating wavelength, λ = 1550 nm. Except for the lengths of the used Y-branches, and a core size of the waveguides, design parameters such as port pitch between the waveguides and simulation parameters for all splitters are considered fixed. The simulation results are analyzed to determine the optimum length of the splitters and the optimum core size. Based on this optimization the total length of the highest designed 1×64 Y-branch splitter was reduced by 41.14 % for a waveguide core (5×5) μm2 compared to the length of splitter with a standard (6×6) μm2 core size.
The paper shows concepts of optical splitting based on three dimensional (3D) optical splitters based on multimode interference principle. This paper is focused on the design, fabrication and characterization of 3D MMI splitter with formed output waveguides based on IP-Dip polymer for direct application on optical fiber. The MMI optical splitter was simulated and fabricated using direct laser writing process. Output characteristics were characterized by highly resolved near-field scanning optical microscope (NSOM) and compared with 3D MMI splitter without output waveguides.
Der Einsatz von Robotik im Pflegekontext wird kontrovers diskutiert und löst unterschiedliche Assoziationen aus. In diesem Beitrag stellen wir Ergebnisse aus einer schriftlichen Befragung bei Pflegekräften aus Deutschland vor. Es wird aufgezeigt, für welche Funktionen und Aufgaben sich Pflegekräfte den Einsatz von Roboter vorstellen können und wo gegensätzliche Einstellungen gegenüber Robotern bestehen. Ein Fallbeispiel illustriert ein mögliches Anwendungsfeld. Mit den reflexiven Fragen laden wir die:den Lesenden ein, sich selbst mit der Idee Roboter als Alltagshelfer für ältere Menschen auseinanderzusetzen.
Calls for decolonising global health have intensified in recent years. The Austrian NGO plan:g Partnership for Global Health has taken several steps to decolonise its work and to find new ways of communicating and engaging in equitable partnerships. Decolonising global health cooperation is however not without its challenges.
Das Nugget-Chart
(2022)
Gaming as a cultural commons
(2022)
Bachground: Worldwide, more than 79.5 million people are forcibly displaced, including a significant number of migrant and refugee families with children. Migration and refugeedom affect these families in different dimensions, such as mental, physical and spiritual health. Identifying family needs and enhancing parenting skills can improve family cohesion and health, as well as smooth integration into the host country. This review is part of the Erasmus+ funded project- IENE 8 (Intercultural Education for Nurses in Europe) aiming at empowering migrant and refugee families regarding parenting skills.
Methods: This was a scoping review of literature. The IENE 8 partner countries (Cyprus, Germany, Greece, Italy, Romania, and United Kingdom) searched for peer reviewed papers, grey literature and mass media reports at international, European and national level. The time period for the search of scientific and grey literature was between2013-2018, and for mass media, it was between 2016 and 2018. Results: 124 relevant sources were identified. They included 33 Peer reviewed papers, 47 Grey literature documents and 44 mass media reports. This revealed the importance of understanding the needs of migrant families with children. Conclusion: It is evident from the literature that there is a need to support refugee parents to adjust their existing skill and to empower them to develop new ones. Healthcare and social services professionals have an essential role in improving the refugees' parenting skills. This can be done by developing and implementing family-centered and culturally-sensitive intervention programs.
Diversiteit
(2022)
Gesundheitsdienstleister kommen täglich mit Vielfalt in Berührung. Aus diesem Grund ist es ein wichtiges Thema in der Berufsausbildung. Das Bewusstsein für Unterschiede im soziokulturellen Hintergrund geht Hand in Hand mit dem Finden von Gemeinsamkeiten.
Inhalt
In dieser Ausgabe der ZorgBasics-Reihe steht Vielfalt in all ihren Facetten im Mittelpunkt. Aus theoretischen Rahmen, persönlichen Lebensgeschichten und Beispielen aus der Gesundheitspraxis wird das Thema Vielfalt vertieft. Weil Vielfalt auch viel mit der eigenen Persönlichkeit zu tun hat, werden dem Leser auch reflektierende Fragen gestellt.
Charakterisieren
• Dem Studierenden werden praktische Werkzeuge an die Hand gegeben, mit denen er Vielfalt auf unterschiedliche Weise betrachten kann.
• Das Buch diskutiert Vielfalt im weitesten Sinne des Wortes und macht das Thema mit Hilfe von Reflexionsübungen aufschlussreich.
• Gedacht für alle in der HGZO gibt es aber auch konkrete Beispiele aus der Pflege- und Ergotherapie.
Neu
Für die dritte Auflage wurde der Inhalt gründlich überarbeitet. Zeitgenössische Entwicklungen wie sexuelle Orientierung und Geschlechtsidentität, Black Lives Matter und die Corona-Pandemie wurden einbezogen. Die Literatur wurde aktualisiert und viele Fälle wurden erneuert. Die Theorien und Modelle wurden um Superdiversität und Intersektionalität erweitert. Darüber hinaus wird auf eine positive Gesundheit und die Suche nach Gemeinsamkeiten und Überbrückungsunterschieden geachtet.
Zielgruppe
Geschrieben für Studenten, die einen Kurs im Gesundheitswesen und Fachleute im Gesundheitswesen absolvieren.
The properties of diamond make it an attractive material for MEMS and sensor devices. We present the feasibility to fabricate membranes and cantilevers made of nano-(micro-) crystalline diamond films grown on Si/SiO2 substrates using microwave chemical vapour deposition (MWCVD). The patterning of micromechanical structures was performed by a combined process of femtosecond laser ablation and wet etching. We designed cantilever structures with varying lengths and widths (25, 50, 100, 200 and 300 μm). The cantilevers were made in a symmetric left- and right-hand configuration. An additional laser treatment was used to modify the mechanical properties of the left-hand cantilever. The deflection of the laser-treated, and non-treated sections was measured. The global mechanical system properties were simulated and corresponded with high accuracy to the measured results of deflection.
Increasing electric vehicle penetration leads to undesirable peaks in power if no proper coordination in charging is implemented. We tested the feasibility of electric vehicles acting as flexible demands responding to power signals to minimize the system peaks. The proposed hierarchical autonomous demand side management algorithm is formulated as an optimal power tracking problem. The distribution grid operator determines a power signal for filling the valleys in the non-electric vehicle load profile using the electric vehicle demand flexibility and sends it to all electric vehicle controllers. After receiving the control signal, each electric vehicle controller re-scales it to the expected individual electric vehicle energy demand and determines the optimal charging schedule to track the re-scaled signal. No information concerning the electric vehicles are reported back to the utility, hence the approach can be implemented using unidirectional communication with reduced infrastructural requirements. The achieved results show that the optimal power tracking approach has the potential to eliminate additional peak demands induced by electric vehicle charging and performs comparably to its central implementation. The reduced complexity and computational overhead permits also convenient deployment in practice.
A trend from centralized to decentralized production is emerging in the manufacturing domain leading to new and innovative approaches for long-established production methods. A technology supporting this trend is Cloud Manufacturing, which adapts technologies and concepts known from cloud computing to the manufacturing domain. A core aspect of Cloud Manufacturing is representing knowledge about manufacturing, e.g., machine capabilities, in a suitable form. This knowledge representation should be flexible and adaptable so that it fits across various manufacturing domains, but, at the same time, should also be specific and exhaustive. We identify three core capabilities that such a platform has to support, i.e., the product, the process and the production.We propose representing this knowledge in semantically specified knowledge graphs, essentially creating three through features interconnected ontologies each representing a facet of manufacturing. Finally, we present an exemplary implementation of a Cloud Manufacturing platform using this representation and its advantages.
Industrial demand side management has shown significant potential to increase the efficiency of industrial energy systems via flexibility management by model-driven optimization methods. We propose a grey-box model of an industrial food processing plant. The model relies on physical and process knowledge and mass and energy balances. The model parameters are estimated using a predictive error method. Optimization methods are applied to separately reduce the total energy consumption, total energy costs and the peak electricity demand of the plant. A viable potential for demand side management in the plant is identified by increasing the energy efficiency, shifting cooling power to low price periods or by peak load reduction.
Trotz der Relevanz von Partizipationsprozessen in Unternehmen und deren belegte Auswirkungen zeigt sich ein deutliches Ungleichgewicht zwischen der aufgezeigten Bedeutung von Beteiligungsprozessen und dem gleichzeitig geringen Umsetzungsstand in Betrieben. Deshalb soll geprüft werden, inwiefern sich die Erwartungen jüngerer Mitarbeiter:innen mit ihrer erlebten Arbeitsrealität decken. Dazu wurden 459 Personen (59,5% Frauen) im Alter zwischen 16 und 35 Jahren zu allgemeinen Partizipationsmöglichkeiten und zu flexiblen Arbeitsbedingungen befragt. Es zeigen sich signifikante Unterschiede in beiden Teilbereichen der Partizipation zwischen den Erwartungen der Arbeitnehmer:innen und deren erlebter Realität in den Unternehmen. Über Angleichung der betrieblichen Realitäten der Partizipation könnten Unternehmen und Mitarbeiter:innen auf verschiedenen Ebenen gewinnen.
We present 256-channel, 25-GHz AWG designed for ultra-dense wavelength division multiplexing. For the design two in-house developed tools were used: AWG-Parameters tool for the calculation of input design parameters and AWGAnalyser tool, used to evaluate the simulated transmission characteristics. The AWG structure was designed for AWG central wavelength of 1550 nm and simulated with PHASAR tool from Optiwave. To keep the size of AWG structure as small as possible the number of waveguides in the phased array was tested. The simulations show that there is a certain minimum number of phased array waveguides necessary to reach sufficient AWG performance. After optimization, the AWG structure reached 10 cm x 11 cm in size and satisfying optical properties.
Welche Politikziele geben Fachkräfte der Sozialen Arbeit an Eltern weiter, konkret was wird in Beratungen von Eltern explizit und implizit thematisiert und empfohlen? Der Artikel fokussiert auf die Herstellung von Geschlechterarrangements im Rahmen von Beratungssettings auf zwei Ebenen: einerseits zwischen Fachkräften und Eltern und andererseits zwischen den beratenen Eltern. Ausgehend von einer Heuristik, welche die Wirkung steuerungspolitischer Interventionen als Resultat der Deutung seitens der Adressierten begreift, stellt der Beitrag ein Instrument vor, mit dem Deutungen familienpolitischer Leistungen in der Beratung von Sozialarbeiter:innen und adressierten Eltern reflektiert werden können: das familienpolitische Brettspiel. Damit bietet das Beratungsinstrument eine Hilfestellung zur geschlechtersensiblen Adressierung der Eltern in Bezug auf ihre Arbeitsteilung.
Semiconducting metal oxides are widely used for solar cells, poto-catalysis, bio-active materials and gas sensors. Besides the material properties of the used semiconductor,the specific surface topology of the sensor determines the device performance. We investigate the preparation and transfer suitable metals onto LIPPS structures on glass for gas sensing applications.
Anhand von empirischem Material aus zwei Forschungsprojekten gibt die Broschüre Einblick in zentrale Harausforderungen, die sich in der pädagogischen Praxis beim Umgang mit (Kinder-)Armut stellen. Die Broschüre vermittelt relevantes Wissen über Armut als gesamtgesellschaftliches Problem. Zudem setzt sie Impulse für die Entwicklung einer kritsch-reflexiven Perspektive auf die Arbeit mit armutserfahrenen Kindern, Eltern und Familien.
Alles bleibt anders? Profession und Disziplin Sozialer Arbeit im Kontext der Covid-19-Pandemie
(2022)
Kommunikation ist Begegnung
(2022)
Alles muss raus
(2022)
Die Pflegebranche in Deutschland ist im Umbruch – sie muss dem zunehmenden Fachkräftemangel etwas entgegensetzen und zugleich als eine der Zukunftsbranchen die Potenziale der Technisierung und Digitalisierung heben.
Dieses Buch erfasst und analysiert die derzeitigen Trends und Herausforderungen sowohl im Bereich der praktischen Pflege als auch auf der Ebene des Pflegemanagements auf allen Führungsebenen. Die Autoren der 30 wissenschaftlichen Beiträge zeigen, wie politische Entscheider, die Organe der Selbstverwaltung und die einzelnen Unternehmen durch unterschiedliche Maßnahmen den Problemen der Pflegebranche entgegenwirken können. Es werden eine Reihe von Handlungsmöglichkeiten und Entwicklungsperspektiven für die unterschiedlichen Akteure der Pflegebranche aufgezeigt, bei denen sich der Faktor Mensch und der Faktor Maschine sinnvoll ergänzen können. Auch werden Pflegekonzepte mit in den Blick genommen, die bisher weniger bekannt sind. Ebenso werden innovative Ansätze von Start-ups und sozialen Entrepreneuren in der Pflege präsentiert.
Nicht zuletzt die Corona-Pandemie hat gezeigt, dass die Pflege eine zentrale, systemrelevante Stütze im Gesundheitswesen in Deutschland darstellt. Die jüngsten Reformen in der Pflegepolitik sind Ausdruck davon und zeigen, dass sich Entscheider auf allen Ebenen und in allen Bereichen der Pflege mit den drängenden Fragen auseinandersetzen müssen. Dazu liefert dieses Buch wichtige Impulse und Anregungen.
PV hosting capacity provides utilities the knowledge of the maximum amount of solar installations possible to accommodate in low voltage grids such that no operational problems arise. As the quantification of the hosting capacity requires data collection, grid modelling, and often time-consuming simulations, simplified estimations for large-scale applications are of interest. In this paper, Bayesian statistical inference is applied to estimate the hosting capacities of more than 5000 real feeders in Austria. The results show that the hosting capacity of 95% of the total feeders can be estimated with a mean error below 20% by only having knowledge of a random sample of 5%. Moreover, the hosting capacity estimation at a regional level shows a maximum error below 9%, also relying on a random sample of 5% of the total feeders. Furthermore, the approach proposed provides a methodology to assess new parameters aiming to improve the accuracy of the hosting capacity estimation at a feeder level.
Various carbon (nano-) forms, so-called allotropes, have become one of the most supporting activities in fundamental and applied research trends. Therefore, a universal deposition process capable of “adjusting” system parameters in one “deposition chamber” is highly demanding. Here, we present a low-pressure large area deposition system combining radiofrequency (RF) and microwave (MW) plasma in one chamber in different configurations, which offers a wide deposition window for the growth of sp2 carbon (carbon nanotubes, amorphous carbon), a mixture of sp2 and sp3 (diamond-like films) and pure sp3 carbon represented by diamond films. We will show that not only the type of plasma source (RF vs. MW) but also the gas mixture and plasma chemistry are crucial parameters for the controllable and reproducible growth of these allotropes at temperatures from 250 to 800 °C.
In this paper we present various educational activities with Photonics Explorer, an educational kit developed by the photonics research team B - PHOT at VUB (Vrije Universiteit Brussel) for students at secondary schools. The concept is a ‘lab-in-a-box’ that enables students of the 2 nd and 3 rd grade to do photonics experiments themselves at school with lasers, LEDs, lenses, optical fibers, and other high-tech components. Even though, the kit was developed for the secondary schools, we use experiments from the kit also for some other teaching activities such as lectures at the university, photonics workshops for teachers and children at primary/secondary schools or for events such as children's/youth's university or the night of sciences. In the frame of Austrian based project Phorsch! we have organized most of these activities which will be presented here.
In this paper, we document optical splitters based on Y-branch and also on MMI splitting principle. The 1×4 Y-branch splitter was prepared in 3D geometry fully from polymer approaching the single mode transmission at 1550 nm. We also prepared new concept of 1×4 MMI optical splitter. Their optical properties and character of output optical field were measured by near-field scanning optical microscope. Splitting properties and optical outputs of both splitters are very promising and increase an attractiveness of presented 3D technology and polymers.
Design, simulation, and optimization of the 1×4 optical three-dimensional multimode interference splitter using IP-Dip polymer as a core and polydimethylsiloxane (PDMS) Sylgard 184 as a cladding is demonstrated. The splitter was simulated by using beam propagation method in BeamPROP simulation module of RSoft photonic tool and optimized for an operating wavelength of 1.55 μm . According to the minimum insertion loss, the dimensions of the splitter were optimized for a waveguide with a core size of 4×4 μm2 . The objective of the study is to create the design for fabrication by three-dimensional direct laser writing optical lithography.
ROS 2 in Embedded Systemen
(2022)
Das Robot Operating System in seiner zweiten Version (ROS 2) findet zunehmend Verwendung und das nicht nur in Robotern. Dieser Beitrag gibt einen Überblick über den Aufbau und die Funktion von ROS 2. Die wesentlichen Elemente werden vorgestellt, das Publish-Subscribe-Konzept, das der Kommunikation zugrunde liegt, wird erläutert. Die Anforderungen von ROS 2 an Hardware und Betriebssystem werden beleuchtet und es werden Betrachtungen zu dessen Echtzeitverhalten gemacht.
Die vorliegende Studie untersucht die Auswirkungen der Covid-Pandemie auf die Finanzierungssituation von Unternehmen in Vorarlberg. Besonderes Augenmerk wird dabei auf kleine und mittlere Unternehmen sowie deren Eigenkapitalausstattung gelegt. Die Analyse erfolgt anhand einer quantitativen Befragung von 569 Unternehmen im Zeitraum Ende Oktober/Anfang November 2021. Ein Großteil der befragten Unternehmen schätzt die Finanzierungssituation insgesamt als befriedigend oder besser ein. Eigenkapital wird die höchste Relevanz aller Finanzierungsquellen zugesprochen. Obwohl 39% der befragten Unternehmen eine Eigenkapitalerhöhung für Ihr Unternehmen als nötig erachten, haben aktuell nur 14% Überlegungen in diese Richtung. Die Ergebnisse der Studie weisen darauf hin, dass eine Beseitigung der steuerlichen Bevorzugung von Fremdkapital (Debt Bias) einen relevanten Anreiz für Eigenkapitalerhöhungen liefern könnte.
Soul in Space
(2022)
Genesungsfördernde Architektur von morgen Antworten auf die aktuellen Herausforderungen für die architektonische Konzeption und Gestaltung von Psychiatriebauten Perspektiven aus Psychiatrie, Architektur und Ethnologie umfassender Praxisteil mit anspruchsvollen Beispielen von Psychiatriearchitektur.
Mehr als jede vierte Person in Deutschland ist im Jahr von einer psychischen Erkrankung betroffen. Seit Jahren ist zu beobachten, dass die Inanspruchnahme psychiatrischer Behandlungen steigt – stationär und ambulant. Nicht zuletzt zeigt die Corona-Pandemie, die mit deutlich gestiegenen Fallzahlen psychiatrischer Diagnosen einhergeht, dass die Bedeutung der psychischen Gesundheit stärker wahrgenommen wird. In der Gesellschaft erwächst ein neues Bewusstsein für einen angemessenen Umgang mit Menschen mit psychischen Erkrankungen.
Vor diesen aktuellen Entwicklungen entstehen Überlegungen, wie psychiatrische Institutionen konzeptuell und architektonisch zu gestalten sind, um den Bedarfen der Patient:innen und Mitarbeitenden gerecht zu werden. Dabei steigt die Komplexität der gesellschaftlichen Kontexte wie auch der Aufgaben: junge Patient:innen in schweren psychischen Krisen bis hin zu hochbetagten Menschen mit demenziellen Erkrankungen. Antworten kommen auch und besonders von Architekt:innen, die einen Raum gestalten, damit die Gesellschaft als solche seelisch gesund bleiben und werden kann.
Das Fachbuch »Soul in Space – Psychiatrie trifft Architektur« beleuchtet die zukünftigen Entwicklungen von Behandlungsansätzen verbunden mit baulich-räumlichen Konzepten der Psychiatrie und Psychotherapie. Diese beiden Disziplinen sind eingebettet in einen gesellschaftlichen Diskurs, der kontinuierlich von ethischen und soziologischen Überlegungen geprägt und ein stückweit auch gefordert wird. Dabei wird die soziale Verantwortung deutlich, die der Gestaltung von Kliniken für die seelische Gesundheit innewohnt. In diesem Buch werden planerische Anforderungen und Lösungswege präsentiert und die Interaktion von Raum und Psyche in all ihren Facetten mit wissenschaftlichen Erkenntnissen belegt. Aktuelle, gestalterisch anspruchsvolle Psychiatriebauten veranschaulichen beispielhaft, welche Gestaltungskriterien zentral sind und wie eine zeitgemäße, genesungsfördernde Architektur nach heutigen Erkenntnissen aussehen kann.
Der Beitrag untersucht die Unterstützungsbedarfe von Schüler_innen während der Schultransition in Österreich und fragt nach Möglichkeiten zum Aufbau von inklusiven Unterstützungsangeboten. Um diesbezüglich Erkenntnisse zu gewinnen, wurden zwei qualitative Datensätze analysiert: Einerseits ein Datensatz aus 2018, in welchem die Transition von der Volks- in die Sekundarschule und damit verbundene Herausforderungen mittels Interviews mit Schüler_innen und involvierten Erwachsenen untersucht wurden. Andererseits ein Datensatz aus 2020, in dem Praktiker_innen über Veränderungen der psychosozialen Unterstützungsangebote für Kinder und Familien während der Covid-19-Pandemie befragt wurden. Die Daten von 2018 zeigen, dass der Aufbau von positiven sozialen Beziehungen zu Gleichaltrigen eine wichtige Ressource für eine gelungene Schultransition darstellt, jedoch nicht immer gelingt, weshalb Unterstützungsbedarf benannt wird. Zugleich werden Zugangsbarrieren zu vorhandenen Unterstützungsangeboten deutlich, die in Zusammenhang mit drei soziodemografischen Charakteristika stehen: (1) Lebenssituation und geografischer Standort, (2) finanzielle Ressourcen und (3) Migrationshintergrund. Die Daten aus dem Jahr 2020 zeigen, dass es durch den Einsatz digitaler Angebote zu einer Überwindung von Zugangsbarrieren und hemmenden Strukturen kommen kann. Die Betrachtung beider Studienergebnisse lässt somit Implikationen für eine verbesserte, inklusive und innovative Versorgungsstruktur für Adressat_innen der Sozialen Arbeit zu.
Open tracing tools
(2023)
Background: Coping with the rapid growing complexity in contemporary software architecture, tracing has become an increasingly critical practice and been adopted widely by software engineers. By adopting tracing tools, practitioners are able to monitor, debug, and optimize distributed software architectures easily. However, with excessive number of valid candidates, researchers and practitioners have a hard time finding and selecting the suitable tracing tools by systematically considering their features and advantages. Objective: To such a purpose, this paper aims to provide an overview of popular Open tracing tools via comparison. Methods: Herein, we first identified 30 tools in an objective, systematic, and reproducible manner adopting the Systematic Multivocal Literature Review protocol. Then, we characterized each tool looking at the 1) measured features, 2) popularity both in peer-reviewed literature and online media, and 3) benefits and issues. We used topic modeling and sentiment analysis to extract and summarize the benefits and issues. Specially, we adopted ChatGPT to support the topic interpretation. Results: As a result, this paper presents a systematic comparison amongst the selected tracing tools in terms of their features, popularity, benefits and issues. Conclusion: The result mainly shows that each tracing tool provides a unique combination of features with also different pros and cons. The contribution of this paper is to provide the practitioners better understanding of the tracing tools facilitating their adoption.
Das Forschungsprojekt Data Sharing Framework untersuchte Data Sharing im Kontext von datenbasierten Services und Produkten in Ökosystemen aus fünf Perspektiven: Kultur, Vertrauen, Wert, Recht & Governance, Sicherheit. Die Forschungsergebnisse bestätigen die Relevanz dieser Perspektiven und es hat sich gezeigt, dass diese Aspekte sowohl Barrieren als auch Treiber für Datennutzung und -austausch zwi- schen Unternehmen darstellen.
Ausgangspunkt waren die folgenden forschungs- und praxisleitenden Annahmen:
• These 1: KMU können durch die Nutzung und das
Teilen von Daten Mehrwerte in Form neuer Produkte und Services generieren. Aus wissenschaftlicher Sicht liegt der Fokus des Themas Daten und Data Science bisher überwiegend auf der technischen Umsetzung datenintensiver Geschäftsmodelle und Kooperationen durch die Unternehmen.
• These 2: Die technische Umsetzung ist eine notwendige Bedingung für die datenbasierte Leistun- gen, sie reicht jedoch nicht aus, um eine Kooperations- und Teilbereitschaft bei KMU hinsichtlich ihrer Daten (Daten-Teilbereitschaft) auszulösen. Zahlreiche Stakeholder zögern, Daten zu teilen, vor allem in einem grenzüberschreitenden Kontext, wie z.B. in der Programmregion.
• These 3: KMU benötigen Data Access und Data Trust Strukturen, um mögliche Kooperationspotenziale tatsächlich zu heben. Dies erfordert u.a. gemeinsa- me Standards, ein annäherndes Verständnis vom Wert der Daten, Data-Governance in Kombination mit zu definierenden Trust-Standards, welche die erforderliche formelle und informelle Sicherheit bieten.
Nachfolgend wird ein Überblick über die hieraus hervorgegangenen Ergebnisse gegeben:
Kultur
Die Perspektive der Organisationskultur stellt das Denken und Handeln im Unternehmen und im Ökosystem in den Mittelpunkt. Eine Organisationskultur, welche die Arbeit mit Daten, Data Science Praktiken und vor allem das Teilen von Daten ermöglicht, stellt Daten in den Mittelpunkt des Wertschöpfungsprozesses. Dies erfordert eine generelle Sensibilisierung
für das Thema Daten, durchlässige Grenzen im und zwischen Unternehmen, ebenso wie ein neues Verständnis von Rollen, Strukturen und Prozessen im Unternehmen.
Vertrauen
Das Vertrauen ist im Ökosystem von großer Bedeutung. Das Einbeziehen von internen Stakeholdern und das Starten mit kleineren Pilotprojekten wird vorgeschlagen, um Vertrauen innerhalb der Organisation und mit externen Partnern zu schaffen.
Wert
Als notwendige Voraussetzung wird der Wert der Daten hervorgehoben. Unternehmen sollten den potenziellen Wert der Datenflüsse kennen, bevor sie sich entscheiden, ob sie diese Daten teilen und nutzen möchten. Es wird empfohlen, eine grobe Quanti- fizierung des Wertflusses vorzunehmen oder gegebe- nenfalls eine detailliertere Analyse durchzuführen.
Recht & Governance
Für die Berücksichtigung rechtlicher Rahmenbedingungen gemeinsamer Datennutzung sollten Organisationen zunächst eine interne Data Governance etablieren, um auf neue regulatorische Entwicklungen reagieren zu können. Die Einrichtung von Data-Asset-Management, Data-IP und -Compliance-Ma-nagement und Data-Contract-Management wird hier empfohlen.
Datensicherheit
Im Sicherheitskontext sind Methoden zur Gewährleistung der Datenintegrität, Privatsphäre und Sicherheit entscheidend. Es wird empfohlen, einen kollaborativen Ansatz zur Implementierung von Sicherheitsstandards zu verfolgen und dabei IKT-Experten einzubeziehen. Anfänglich können Best Practices ausreichen, aber längerfristig sollte eine kontinuierliche Sicherheitsrisikobewertung und Ge- schäftsprozessintegration angestrebt werden.
Creating a schedule to perform certain actions in a realworld environment typically involves multiple types of uncertainties. To create a plan which is robust towards uncertainties, it must stay flexible while attempting to be reliable and as close to optimal as possible. A plan is reliable if an adjustment to accommodate for a new requirement causes only a few disruptions. The system needs to be able to adapt to the schedule if unforeseen circumstances make planned actions impossible, or if an unlikely event would enable the system to follow a better path. To handle uncertainties, the used methods need to be dynamic and adaptive. The planning algorithms must be able to re-schedule planned actions and need to adapt the previously created plan to accommodate new requirements without causing critical disruptions to other required actions.
Coupling is one of the most frequently mentioned metric in software systems. However, to measure logical coupling between microservices, runtime information is needed or the availability of service-log files to analyze the calls between services is required. This work presents our emerging results, in which we propose a metric to statically calculate logical coupling between microservices based on commits to versioning systems. We performed an initial validation of the proposed metric with a dataset containing 145 open-source microservices projects. The results illustrate how logical coupling affects every system and increases overtime. However, we did not find a correlation between the number of commits or the number of developers and the introduction of logical coupling. In future, we investigate why, how, and when logical coupling is introduced in a system.
This paper presents design, simulation, and optimization of the three-dimensional 1×4 optical multimode interference splitter using IP-Dip polymer as a core and polydimethylsiloxane (PDMS) Sylgard 184 as a cladding. The splitter was simulated by using beam propagation method in BeamPROP simulation engine of RSoft photonic tool and optimized for an operating wavelength of 1.55 µm. According to the minimum insertion loss, the dimensions of the MMI coupler and the length of the whole MMI splitter structure were optimized applying a waveguide with a core size of 4×4 µm2. The objective of the study is to create a design for fabrication by three-dimensional direct laser writing optical lithography.
Design, simulation, and optimization of the 1×4 optical three-dimensional multimode interference splitter using IP-Dip polymer as a core and polydimethylsiloxane (PDMS) Sylgard 184 as a cladding is demonstrated. The splitter was simulated by using beam propagation method in BeamPROP simulation module of RSoft photonic tool and optimized for an operating wavelength of 1.55 μm . According to the minimum insertion loss, the dimensions of the splitter were optimized for a waveguide with a core size of 4×4 μm2 . The objective of the study is to create the design for fabrication by three-dimensional direct laser writing optical lithography.
The role of entrepreneurs and intrapreneurs in the current zeitgeist is to drive innovation, re-shape rigid, established processes in business as well as for consumers. They use new viewpoints to pioneer new (business) models which focus on ‘smartness’ rather than the purely monetary and short-sighted models of yesteryear. Fostering and supporting the culture of this current zeitgeist is a mayor challenge for entre- and intrapreneurial support infrastructures, namely startup centres and innovation hubs of universities and other public institutions as well as innovation centres of private companies. Hereby, support may range from access to funding over provision of resources such as offices or computing hardware to coaching in the development of business ideas and strategic roadmaps for product and service deployment. In this paper, we focus on describing the status-quo of afore- mentioned support infrastructures in Vorarlberg and the Lake Constance region, then extend the scope to existing (international) approaches for aiding founders and inno- vators in the development of smart services. An analysis of success stories of the Vorarlberg startup centre ‘startupstube’ and other initiatives including their compar- ison to international counterparts builds the basis for a methodological framework for (service science) coaching in entre- and intrapreneurial support infrastructures. The paper is concluded by the description of a framework for choosing the right methods and tools to create service value in entre-/intrapreneurship based upon tested, proven know-how and for defining support infrastructure needs based upon pre-defined stakeholder and target groups as well as the (industry) sectors of the innovators.
International Entrepreneurship explains the opportunities and challenges facing internationalizing entrepreneurial ventures. The book inlcudes a thorough discussion of fundamentals as well as contemporary research findings. Numerous cases, featuring diverse contexts, illustrate theory and help classroom use.
Redundanz und Varietät
(2023)
Ausrechnen oder aushandeln?
(2023)
Vast amounts of oily wastewater are byproducts of the petrochemical and the shipping industry and to this day frequently discharged into water bodies either without or after insufficient treatment. To alleviate the resulting pollution, water treatment processes are in great demand. Bubble column humidifiers (BCHs) as part of humidification–dehumidification systems are predestined for such a task, since they are insensitive to different feed liquids, simple in design and have low maintenance requirements. While humidification in a bubble column has been investigated plentiful for desalination, a systematic investigation of oily wastewater treatment is missing in literature. We filled this gap by analyzing the treatment of an oil–water emulsion experimentally to derive recommendations for future design and operation of BCHs. Our humidity measurements indicate that the air stream is always saturated after humidification for a liquid height of only 10 cm. A residual water mass fraction of 3.5 wt% is measured after a batch run of six hours. Furthermore, continuous measurements show that an increase in oil mass fraction leads to a decrease in system productivity especially for high oil mass fractions. This decrease is caused by the heterogeneity of the liquid temperature profile. A lower liquid height mitigates this heterogeneity, therefore decreasing the heat demand and improving the overall efficiency. The oil content of the produced condensate is below 15 ppm, allowing discharge into various water bodies. The results of our systematic investigation prove suitability and indicate a strong future potential for the use of BCHs in oily wastewater treatment.
Purpose – The purpose of this study is to explore the exogenous and endogenous drivers of the high-growth of Unicorn start-ups along their life cycle, with a particular focus on Unicorns in the fintech industry.
Design/methodology/approach – The study employs an explorative longitudinal analysis with a matched pair of two cases of Unicorns start-ups with similar antecedent features to understand holistically drivers over the longer term.
Findings – High-growth patterns over the longer term are the result of a combined industry- and company-life cycle perspective. Drivers and growth patterns vary significantly according to the time of entry in the industry and
its development status. The findings are systematised within a set of propositions to be tested in future research.
Research limitations/implications – The limitations lie in empirical evidence, as the analysis is limited to one matched-pair. The revealed Unicorns’ drivers for long-term growth might encourage future research to further investigate these drivers on a larger scale.
Practical implications – The study offers practical recommendations for start-ups with high-growth ambitions and advice to policy makers regarding the development of tailor-made support programs.
Originality/value – The study significantly extends extant work on growth and high-growth by examining endogenous and exogenous triggers over time and by linking the Unicorn-life cycle to the industry life cycle, an approach which has, to the best of the authors’ knowledge, not yet been applied.
Digital twin as enabler of business model innovation for infrastructure construction projects
(2023)
Emerging technologies and methods are becoming an important element of the construction industry. Digital Twins are used as a base to store data in BIM models and make use out of the data respectively make the data visible. The transparency in all phases of the lifecycle of building and infrastructure assets is crucial in order to get a more efficient lifecycle of planning, construction and maintenance. Whereas other industries increased performance in these phases by making use out of the data, construction industry is stuck in traditional methods and business models. In this paper we propose a concept that focuses on the digital production twin. The comparison of planning data with As-Is production data can empower a data driven continuous improvement process and support the decision making process of future innovations and suitable business models. This paper outlines the possibility to use the data stored in a digital twin with regards to the evaluation of possible business models.
We present design of planar 16-channel, 100-GHz multi-mode polymer-based AWG. This AWG was designed for central wavelength of 1550 nm applying AWG-Parameters tool. The AWG structure was created and simulated in the commercial photonic tool PHASAR from Optiwave. Achieved transmission characteristics were evaluated by AWG-Analyzer tool. For the design, multi-mode waveguides having a cross-section of (4x4) µm2 were used. The simulated results show strong worsening of the transmission characteristics in comparison when using single-mode waveguides. Nevertheless, the transmitting channels are clearly separated. The reason for using thicker multi-mode waveguides in the design is possibility to fabricate the AWG structure on polymer basis using direct laser writing lithography.
Statistische Methodenkompetenz wird im Controlling zunehmend bedeutender, so ist die evidenzbasierte Prognose durch algorithmische Analyse von Datenbeständen ein Schwerpunkt von Controlling Analytics. Die Fallstudie durchleuchtet daher anhand von Datenmaterial des Schweizer Bundesamts für Statistik das Vorgehen bei einer Datenanalyse, insbesondere beim Einsatz der Zeitregression für Prognosezwecke, und geht dabei auf methodische Besonderheiten, Caveats und Einsatzmöglichkeiten in Microsoft Excel ein. Die Fallbeschreibung und Aufgaben sind im WiSt-Heft Nr. 4/23 zu finden.
Digitalization is changing business models and operational processes. At the same time, improved data availability and powerful analytical methods are influencing controlling and increasingly require the use of statistical and information technology skills and knowledge. Using a case study from marketing controlling, the article shows the use of business analytics methods and addresses the tasks of controlling in the digital age.
Optoelectronic system based on photonic integrated circuits to miniaturize spectral domain OCT
(2023)
We present a miniaturized optical coherence tomography (OCT) setup based on photonic integrated circuits (PIC) for the 850 nm range. We designed a 512-channel arrayed waveguide grating (AWG) on a PIC for spectral domain OCT (SD-OCT) that is co-integrated with PIN-photodiodes and analog-to-digital-converters on one single chip. This image sensor is combined with all the necessary electronics to act as a camera. It is integrated into a fiber-based OCT system, achieving a sensitivity of >80dB and various samples are imaged. This optoelectronic system will allow building small and cost-effective OCT systems to monitor retinal diseases.
Der vorliegende Beitrag stellt das Konzept eines Flipped Classroom-Ansatzes für die Lehrveranstaltung „Grundlagen der Wirtschaft und finanziellen Unternehmensführung“ im Masterstudiengang Wirtschaftsinformatik der Fachhochschule Vorarlberg vor. Es werden die Rahmenbedingungen der Lehrveranstaltung erläutert und die didaktischen Überlegungen sowie Zielsetzungen diskutiert. Besonderes Augenmerk wird auf die Vorteile des Blended Learning sowie die Bedeutung von Feedback gelegt. Anschließend werden die Inhalte, der Aufbau sowie die verwendeten Materialien und Tools beschrieben. Es wird gesondert auf den Feedbackprozess eingegangen. Abschließend erfolgt eine Bewertung des Lehrveranstaltungskonzepts anhand der Dimensionen technischer Ablauf, Engagement der Studierenden, Klausurerfolg und Lehrveranstaltungsevaluation. Auf dieser Basis werden mögliche Verbesserungen für die Zukunft abgeleitet. Insgesamt wird deutlich, dass der Flipped Classroom-Ansatz eine effektive Methode ist, die mit Standardtools umgesetzt werden kann und die den Lernerfolg und die Zufriedenheit der Studierenden fördert.
The main aims of this work are the validation of the developed process of gluing a single-mode optical fiber array with a photonic chip and the selection of a more suitable adhesive from the two adhesives being compared. An active alignment system was used for adjusting the two optical fiber arrays to a photonics chip. The gluing was done by two compared UV curable adhesives applied in the optical path. The insertion losses of glued coupling were measured and investigated at two discrete wavelengths 1310 nm and 1550 nm during temperature testing in the climatic chamber according to Telcordia GR_1209_Corei04 [3]. The measurement, investigation, and comparison of insertion losses of the glued coupling at the spectral band from 1530 nm to 1570 nm were done immediately after gluing process and after three temperature cycles in the climatic chamber with one month delay.
In this paper, a 256-channel, 10-GHz arrayed waveguide gratings demultiplexer for ultra-dense wavelength division multiplexing was designed using an in-house developed tool called AWG-Parameters. The AWG demultiplexer was designed for a central wavelength of 1550 nm and the structure was simulated in PHASAR tool from Optiwave. Two different AWG designs were developed and the influence of the design parameters on the AWG performance was studied.
Das Kreisgespräch
(2023)
In Bewegung kommen
(2023)
Das Modellprojekt „Caritas Care – Betreuung zuhause“ wurde 2012 in einer Kooperation der Caritas Schweiz und der Caritas Alba Iulia (Transsylvanien/Rumänien) ins Leben gerufen. Damit sollte ein Modell geschaffen werden, welches einerseits dem wachsenden Markt der „Betreuung zuhause“ in der Schweiz entgegenkommt, aber andererseits fairere Arbeitsbedingungen für die Betreuungspersonen vorsieht. Fairness sollte durch einen Versicherungsschutz der Arbeitskräfte, Weiterbildungsmöglichkeiten und ein Entgelt, das mit anderen Arbeitsverhältnissen vergleichbar ist, sowie dank klar abgegrenzter Arbeits-, Präsenz- und Freizeit erreicht werden. Die Umsetzung erfolgt folgendermaßen: Angestellte Betreuungs- und Pflegefachkräfte der Caritas Alba Iulia können für sechs Wochen bis zu drei Monaten in die Schweiz gehen, um dort in Privathaushalten hilfsbedürftige Menschen zu unterstützen (Live-in-Betreuungen). Sie werden während dieser Zeit von der Caritas Schweiz angestellt. Danach kehren die Betreuenden wieder in ihr Anstellungsverhältnis bei der Caritas Alba Iulia zurück. Es wird sozusagen Personal „verliehen“. Damit soll einem Verlust von qualifiziertem Betreuungs- und Pflegepersonal durch Abwanderung aus Rumänien entgegengewirkt werden. Im Rahmen des studiengangsübergreifenden, interdisziplinären Kontextstudiums der Masterstudiengänge der Fachhochschule Vorarlberg (Österreich) hat sich eine Gruppe Forschender zum Ziel gesetzt, dieses Modellprojekt forscherisch zu erkunden. Wir wollten wissen, wie dieses Live-in-Betreuungsangebot nach zehn Jahren Laufzeit funktioniert. Insbesondere interessierten uns die Erfahrungen der rumänischen Betreuer:innen und ihrer Angehörigen sowie der projektverantwortlichen Leitungspersonen in der Caritas Alba Iulia und der Caritas Schweiz. Im Rahmen einer Feldforschungswoche im Juli 2022 in Transsylvanien/Siebenbürgen wurden 28 formelle Interviews mit Projektverantwortlichen, Betreuern/Betreuerinnen und deren Angehörigen durchgeführt. Zusätzlich wurden Dokumente und Feldnotizen sowie Gedächtnisprotokolle von informellen Gesprächen mit Personen der extramuralen Einrichtungen in Rumänien in die Auswertung integriert. Die Auswertung erfolgte inhaltsanalytisch.
Organic acidurias (OAs), urea-cycle disorders (UCDs), and maple syrup urine disease (MSUD) belong to the category of intoxication-type inborn errors of metabolism (IT-IEM). Liver transplantation (LTx) is increasingly utilized in IT-IEM. However, its impact has been mainly focused on clinical outcome measures and rarely on health-related quality of life (HRQoL). Aim of the study was to investigate the impact of LTx on HrQoL in IT-IEMs. This single center prospective study involved 32 patients (15 OA, 11 UCD, 6 MSUD; median age at LTx 3.0 years, range 0.8–26.0). HRQoL was assessed pre/post transplantation by PedsQL-General Module 4.0 and by MetabQoL 1.0, a specifically designed tool for IT-IEM. PedsQL highlighted significant post-LTx improvements in total and physical functioning in both patients' and parents' scores. According to age at transplantation (≤3 vs. >3 years), younger patients showed higher post-LTx scores on Physical (p = 0.03), Social (p < 0.001), and Total (p =0.007) functioning. MetabQoL confirmed significant post-LTx changes in Total and Physical functioning in both patients and parents scores (p ≤ 0.009). Differently from PedsQL, MetabQoL Mental (patients p = 0.013, parents p = 0.03) and Social scores (patients p = 0.02, parents p = 0.012) were significantly higher post-LTx. Significant improvements (p = 0.001–0.04) were also detected both in self- and proxy-reports for almost all MetabQoL subscales. This study shows the importance of assessing the impact of transplantation on HrQoL, a meaningful outcome reflecting patients' wellbeing. LTx is associated with significant improvements of HrQol in both self- and parentreports. The comparison between PedsQL-GM and MetabQoL highlighted that MetabQoL demonstrated higher sensitivity in the assessment of diseasespecific domains than the generic PedsQL tool.
Grey Box models provide an important approach for control analysis in the Heating, Ventilation and Air Conditioning (HVAC) sector. Grey Box models consist of physical models where parameters are estimated from data. Due to the vast amount of component models that can be found in literature, the question arises, which component models perform best on a given system or dataset? This question is investigated systematically using a test case system with real operational data. The test case system consists of a HVAC system containing an energy recovery unit (ER), a heating coil (HC) and a cooling coil (CC). For each component, several suitable model variants from the literature are adapted appropriately and implemented. Four model variants are implemented for the ER and five model variants each for the HC and CC. Further, three global optimization algorithms and four local optimization algorithms to solve the nonlinear least squares system identification are implemented, leading to a total of 700 combinations. The comparison of all variants shows that the global optimization algorithms do not provide significantly better solutions. Their runtimes are significantly higher. Analysis of the models shows a dependency of the model accuracy on the number of total parameters.
Demand-side management approaches that exploit the temporal flexibility of electric vehicles have attracted much attention in recent years due to the increasing market penetration. These demand-side management measures contribute to alleviating the burden on the power system, especially in distribution grids where bottlenecks are more prevalent. Electric vehicles can be defined as an attractive asset for distribution system operators, which have the potential to provide grid services if properly managed. In this thesis, first, a systematic investigation is conducted for two typically employed demand-side management methods reported in the literature: A voltage droop control-based approach and a market-driven approach. Then a control scheme of decentralized autonomous demand side management for electric vehicle charging scheduling which relies on a unidirectionally communicated grid-induced signal is proposed. In all the topics considered, the implications on the distribution grid operation are evaluated using a set of time series load flow simulations performed for representative Austrian distribution grids. Droop control mechanisms are discussed for electric vehicle charging control which requires no communication. The method provides an economically viable solution at all penetrations if electric vehicles charge at low nominal power rates. However, with the current market trends in residential charging equipment especially in the European context where most of the charging equipment is designed for 11 kW charging, the technical feasibility of the method, in the long run, is debatable. As electricity demand strongly correlates with energy prices, a linear optimization algorithm is proposed to minimize charging costs, which uses next-day market prices as the grid-induced incentive function under the assumption of perfect user predictions. The constraints on the state of charge guarantee the energy required for driving is delivered without failure. An average energy cost saving of 30% is realized at all penetrations. Nevertheless, the avalanche effect due to simultaneous charging during low price periods introduces new power peaks exceeding those of uncontrolled charging. This obstructs the grid-friendly integration of electric vehicles.
Background: Cardiovascular disease is the major cause of death worldwide. Although knowledge regarding diagnosing and treating cardiovascular disease has increased dramatically, secondary prevention remains insufficiently implemented due to failure among affected individuals to adhere to guideline recommendations. This has continued to lead to high morbidity and mortality rates. Involving patients in their healthcare and facilitating their active roles in their chronic disease management is an opportunity to meet the needs of the increasing number of cardio-vascular patients. However, simple recall of advice regarding a more preventive lifestyle does not affect sustainable behavioral lifestyle changes. We investigate the effect of plaque visualization combined with low-threshold daily lifestyle tasks using the smartphone app PreventiPlaque to evaluate change in cardiovascular risk profile. Methods: and study design: This randomized, controlled clinical trial includes 240 participants with ultrasound evidence of atherosclerotic plaque in one or both carotid arteries, defined as focal thickening of the vessel wall measuring 50% more than the regular vessel wall. A criterion for participation is access to a smartphone suitable for app usage. The participants are randomly assigned to an intervention or a control group. While both groups receive the standard of care, the intervention group has additional access to the PreventiPlaque app during the 12-month follow-up. The app includes daily tasks that promote a healthier lifestyle in the areas of smoking cessation, medication adherence, physical activity, and diet. The impact of plaque visualization and app use on the change in cardiovascular risk profile is assessed by SCORE2. Feasibility and effectiveness of the PreventiPlaque app are evaluated using standardized and validated measures for patient feedback.
The usage of data gathered for Industry 4.0 and smart factory scenarios continues to be a problem for companies of all sizes. This is often the case because they aim to start with complicated and time-intensive Machine Learning scenarios. This work evaluates the Process Capability Analysis (PCA) as a pragmatic, easy and quick way of leveraging the gathered machine data from the production process. The area of application considered is injection molding. After describing all the required domain knowledge, the paper presents an approach for a continuous analysis of all parts produced. Applying PCA results in multiple key performance indicators that allow for fast and comprehensible process monitoring. The corresponding visualizations provide the quality department with a tool to efficiently choose where and when quality checks need to be performed. The presented case study indicates the benefit of analyzing whole process data instead of considering only selected production samples. The use of machine data enables additional insights to be drawn about process stability and the associated product quality.