Refine
Year of publication
Document Type
- Article (450) (remove)
Institute
- Wirtschaft (134)
- Forschungszentrum Mikrotechnik (104)
- Forschungszentrum Business Informatics (67)
- Technik | Engineering & Technology (55)
- Department of Computer Science (Ende 2021 aufgelöst; Integration in die übergeordnete OE Technik) (54)
- Forschungszentrum Energie (51)
- Soziales & Gesundheit (51)
- Forschungsgruppe Empirische Sozialwissenschaften (22)
- Didaktik (mit 31.03.2021 aufgelöst; Integration ins TELL Center) (20)
- Josef Ressel Zentrum für Materialbearbeitung (15)
Language
- English (288)
- German (160)
- Multiple languages (2)
Keywords
- Laser ablation (8)
- Entscheidung (6)
- Evolution strategy (5)
- Schreibdidaktik (5)
- Soziale Arbeit (5)
- Volatile organic compounds (5)
- Y-branch splitter (5)
- Ausscheidung (4)
- Demand side management (4)
- Organisation (4)
Das Konzept der entscheidungsgetriebenen Organisation basiert auf der Tatsache, dass jede Aktivität entlang der arbeitsteiligen Wertschöpfung in einer Organisation1 im Kern auf Entscheidungen beruht, die aneinander anknüpfen.2 Jede Aktivität kann man vollziehen oder unterlassen, beide Möglichkeiten sind zunächst gleichgewichtig. Jede argumentative Begründung für eine Aktivität ist dabei zugleich eine Begründung gegen alle anderen, ebenso möglichen Aktivitäten. Da dies für alle wertschöpfenden Aktivitäten in einer Organisation gilt, werden Entscheidungen von jeder an der arbeitsteiligen Leistungserstellung beteiligten Person getroffen.
This paper presents a project developed at the K.S.Rangasamy College of Technology (Tamilnadu,India) aimed at designing, implementing, and testing an autonomous multipurpose vehicle with safe, efficient, and economic operation. This autonomous vehicle moves through the crop lines of a Agricultural land and performs tasks that are tedious and/or hazardous to the farmers. First, it has been equipped for spraying, but other configurations have also been designed, such as: a seeding ,plug platform to reach the top part of the plants to perform different tasks (pruning, harvesting, etc.), and a trailer to transport the fruits, plants, and crop waste.
Modern portable electronic devices have seen component heat load increasing, while the space available for heat dissipation has decreased. This requires the thermal management system to be optimized to attain the high performance heat sink. Heat sinks plays a major role for dissipating heat in electronic devices. Phase change material (PCM) is used to enhance the heat dissipation in heat sink. This paper reports the results of an experimental investigation of the performance of Pin fin heat sinks filled with phase change materials for thermal management of electronic devices. The experimental set ups are prepared with the graphical programming language with Lab VIEW (Laboratory Virtual Instruments for Engineering Workbench. Three different types of Pin fin Heat sink with and without PCM are investigated based on different operational timings and the temperature is acquired with the help of Data Acquisition Card (DAQ). The results indicated that the inclusion of the PCM could stabilize the temperature for a longer period and reduce the heating rates and peak temperatures of heat sink with increasing the number of fins can enhance the thermal performance of electronic devices.
Signatures of the optical stark effect on entangled photon pairs from resonantly-pumped quantum dots
(2023)
Two-photon resonant excitation of the biexciton-exciton cascade in a quantum dot generates highly polarization-entangled photon pairs in a near-deterministic way. However, the ultimate level of achievable entanglement is still debated. Here, we observe the impact of the laser-induced ac-Stark effect on the quantum dot emission spectra and on entanglement. For increasing pulse-duration-to-lifetime ratios and pump powers, decreasing values of concurrence are recorded. Nonetheless, additional contributions are still required to fully account for the observed below-unity concurrence.
Synthetic polymers, such as polyamide (PA), inherently possess a moderate number of surface functionalities compared to natural polymers, which negatively impacts the uniformity of metallic coatings obtained through wet-chemical methods like electroless plating. The paper presents the use of a siloxane interlayer formed from the condensation of the hydrolyzed 3-triethoxysilylpropyl succinic anhydride (TESPSA) precursor as a strategy to modify the surface properties of polyamide 6.6 (PA66) fabrics and improve the uniformity of the copper surface coating. The application of the siloxane intermediate coating demonstrates a significant improvement in electrical conductivity, up to 20 times higher than fabrics without the interlayer. The morphology of the coatings was investigated using scanning electron (SEM) and laser confocal scanning microscopy (LSM). In addition, dye adsorption, flexural rigidity, air permeability and contact angle measurements were conducted to monitor the change in the PA66 properties after the siloxane functionalization.
Beyond the Four-Level Model: Dark and Hot States in Quantum Dots Degrade Photonic Entanglement
(2023)
Entangled photon pairs are essential for a multitude of quantum photonic applications. To date, the best performing solid-state quantum emitters of entangled photons are semiconductor quantum dots operated around liquid-helium temperatures. To favor the widespread deployment of these sources, it is important to explore and understand their behavior at temperatures accessible with compact Stirling coolers. Here we study the polarization entanglement among photon pairs from the biexciton–exciton cascade in GaAs quantum dots at temperatures up to ∼65 K. We observe entanglement degradation accompanied by changes in decay dynamics, which we ascribe to thermal population and depopulation of hot and dark states in addition to the four levels relevant for photon pair generation. Detailed calculations considering the presence and characteristics of the additional states and phonon-assisted transitions support the interpretation. We expect these results to guide the optimization of quantum dots as sources of highly entangled photons at elevated temperatures.
In this paper, we consider the question of data aggregation using the practical example of emissions data for economic activities for the sustainability assessment of regional bank clients. Given the current scarcity of company-specific emission data, an approximation relies on using available public data. These data are reported in different standards in different sources. To determine a mapping between the different standards, an adaptation to the Covariance Matrix Self-Adaptation Evolution Strategy is proposed. The obtained results show that high-quality mappings are found. Nevertheless, our approach is transferable to other data compatibility problems. These can be found in the merging of emissions data for other countries, or in bridging the gap between completely different data sets.
This study presents different approaches to increase the sensing area of NiO based semiconducting metal oxide gas sensors. Micro- and nanopatterned laser induced periodic surface structures (LIPSS) are generated on silicon and Si/SiO2 substrates. The surface morphologies of the fabricated samples are examined by FE SEM. We select the silicon samples with an intermediate Si3N4 layer due to its superior isolation quality over the thermal oxide for evaluating the hydrogen and acetone sensitivity of a NiO based test sensor.
Objectives: The MetabQoL 1.0 is the first disease-specific health related quality of life (HrQoL) questionnaire for patients with intoxication-type inherited metabolic disorders. Our aim was to assess the validity and reliability of the MetabQoL 1.0, and to investigate neuropsychiatric burden in our patient population. Methods: Data from 29 patients followed at a single center, aged between 8 and 18 years with the diagnosis of methylmalonic acidemia (MMA), propionic acidemia (PA) or isovaleric acidemia (IVA), and their parents were included. The Pediatric Quality of Life Inventory (PedsQoL) was used to evaluate the validity and reliability of MetabQoL 1.0.
Results: The MetabQoL 1.0 was shown to be valid and reliable (Cronbach's alpha: 0.64–0.9). Fourteen out of the 22 patients (63.6%) formally evaluated had neurological findings. Of note, 17 out of 20 patients (85%) had a psychiatric disorder when evaluated formally by a child and adolescent psychiatrist. The median mental scores of the MetabQoL 1.0 proxy report were significantly higher than those of the self report (p = 0.023). Patients with neonatal-onset disease had higher MetabQoL 1.0 proxy physical (p = 0.008), mental (p = 0.042), total scores (p = 0.022); and self report social (p = 0.007) and total scores (p = 0.043) than those with later onset disease.
Conclusions: This study continues to prove that the MetabQoL 1.0 is an effective tool to measure what matters in intoxication-type inherited metabolic disorders. Our results highlight the importance of clinical assessment complemented by patient reported outcomes which further expands the evaluation toolbox of inherited metabolic diseases.
In Bewegung kommen
(2023)
Highly-sensitive single-step sensing of levodopa by swellable microneedle-mounted nanogap sensors
(2023)
Microneedle (MN) sensing of biomarkers in interstitial fluid (ISF) can overcome the challenges of self-diagnosis of diseases by a patient, such as blood sampling, handling, and measurement analysis. However, the MN sensing technologies still suffer from poor measurement accuracy due to the small amount of target molecules present in ISF, and require multiple steps of ISF extraction, ISF isolation from MN, and measurement with additional equipment. Here, we present a swellable MN-mounted nanogap sensor that can be inserted into the skin tissue, absorb ISF rapidly, and measure biomarkers in situ by amplifying the measurement signals by redox cycling in nanogap electrodes. We demonstrate that the MN-nanogap sensor measures levodopa (LDA), medication for Parkinson disease, down to 100 nM in an aqueous solution, and 1 μM in both the skin-mimicked gelatin phantom and porcine skin.
Organic acidurias (OAs), urea-cycle disorders (UCDs), and maple syrup urine disease (MSUD) belong to the category of intoxication-type inborn errors of metabolism (IT-IEM). Liver transplantation (LTx) is increasingly utilized in IT-IEM. However, its impact has been mainly focused on clinical outcome measures and rarely on health-related quality of life (HRQoL). Aim of the study was to investigate the impact of LTx on HrQoL in IT-IEMs. This single center prospective study involved 32 patients (15 OA, 11 UCD, 6 MSUD; median age at LTx 3.0 years, range 0.8–26.0). HRQoL was assessed pre/post transplantation by PedsQL-General Module 4.0 and by MetabQoL 1.0, a specifically designed tool for IT-IEM. PedsQL highlighted significant post-LTx improvements in total and physical functioning in both patients' and parents' scores. According to age at transplantation (≤3 vs. >3 years), younger patients showed higher post-LTx scores on Physical (p = 0.03), Social (p < 0.001), and Total (p =0.007) functioning. MetabQoL confirmed significant post-LTx changes in Total and Physical functioning in both patients and parents scores (p ≤ 0.009). Differently from PedsQL, MetabQoL Mental (patients p = 0.013, parents p = 0.03) and Social scores (patients p = 0.02, parents p = 0.012) were significantly higher post-LTx. Significant improvements (p = 0.001–0.04) were also detected both in self- and proxy-reports for almost all MetabQoL subscales. This study shows the importance of assessing the impact of transplantation on HrQoL, a meaningful outcome reflecting patients' wellbeing. LTx is associated with significant improvements of HrQol in both self- and parentreports. The comparison between PedsQL-GM and MetabQoL highlighted that MetabQoL demonstrated higher sensitivity in the assessment of diseasespecific domains than the generic PedsQL tool.
Long-Term outcome of infantile onset pompe disease patients treated with enzyme replacement therapy
(2024)
Background: Enzyme replacement therapy (ERT) with recombinant human alglucosidase alfa (rhGAA) was approved in Europe in 2006. Nevertheless, data on the long-term outcome of infantile onset Pompe disease (IOPD) patients at school age is still limited.
Objective: We analyzed in detail cardiac, respiratory, motor, and cognitive function of 15 German-speaking patients aged 7 and older who started ERT at a median age of 5 months.
Results: Starting dose was 20 mg/kg biweekly in 12 patients, 20 mg/kg weekly in 2, and 40 mg/kg weekly in one patient. CRIM-status was positive in 13 patients (86.7%) and negative or unknown in one patient each (6.7%). Three patients (20%) received immunomodulation. Median age at last assessment was 9.1 (7.0–19.5) years. At last follow-up 1 patient (6.7%) had mild cardiac hypertrophy, 6 (42.9%) had cardiac arrhythmias, and 7 (46.7%) required assisted ventilation. Seven patients (46.7%) achieved the ability to walk independently and 5 (33.3%) were still ambulatory at last follow-up. Six patients (40%) were able to sit without support, while the remaining 4 (26.7%) were tetraplegic. Eleven patients underwent cognitive testing (Culture Fair Intelligence Test), while 4 were unable to meet the requirements for cognitive testing. Intelligence quotients (IQs) ranged from normal (IQ 117, 102, 96, 94) in 4 patients (36.4%) to mild developmental delay (IQ 81) in one patient (9.1%) to intellectual disability (IQ 69, 63, 61, 3x < 55) in 6 patients (54.5%). White matter abnormalities were present in 10 out of 12 cerebral MRIs from 7 patients.
Measuring what matters
(2023)
Patient reported outcomes (PROs) are generally defined as ‘any report of the status of a patient's health condition that comes directly from the patient, without interpretation of the patient's response by a clinician or anyone else’. A broader definition of PRO also includes ‘any information on the outcomes of health care obtained directly from patients without modification by clinicians or other health care professionals’. Following this approach, PROs encompass subjective perceptions of patients on how they function or feel not only in relation to a health condition but also to its treatment as well as concepts such as health-related quality of life (HrQoL), information on the functional status of a patient, signs and symptoms and symptom burden. PRO measurement instruments (PROMs) are mostly questionnaires and inform about what patients can do and how they feel. PROs and PROMs have not yet found unconditional acceptance and wide use in the field of inborn errors of metabolism. This review summarises the importance and usefulness of PROs in research, drug legislation and clinical care and informs about quality standards, development, and potential methodological shortfalls of PROMs. Inclusion of PROs measured with high-quality, well-selected PROMs into clinical care, drug legislation, and research helps to identify unmet needs, improve quality of care, and define outcomes that are meaningful to patients. The field of IEM should open to new methodological approaches such as the definition of core sets of variables including PROs to be systematically assessed in specific metabolic conditions and new collaborations with PRO experts, such as psychologists to facilitate the systematic collection of meaningful data.
Zu Beginn des Forschungsprojektes „Neue Museumswelten“ wollten wir von Studierenden der Studiengänge Bachelor und Master InterMedia an der Fachhochschule Vorarlberg wissen, was sie mit dem Begriff „Museum“ verbinden. „Museum? Da gehe ich nur im Urlaub hin. Aber hier in Vorarlberg nicht“, war eine geläufige Aussage, die auf ein bestimmtes mentales Modell von Museum verweist. Viele Studierenden gehören also der Gruppe der Gelegenheits- oder Nichtbesucher:innen an. Wie sich in weiterer Folge herausstellte, handelt es sich dabei um eine durchaus heterogene Gruppe, die jedoch auch Gemeinsamkeiten aufweist: Alle Menschen, mit denen wir bisher im Zuge des Forschungsprojekts im Stadtraum, auf Events und im Museum sprachen, spielten und Zukunftsvisionen entwickelten, brachten ihre eigenen Bilder, Vorstellungen und Ideen zu Museen und möglichen Museumszukünften mit. Der Untersuchung genau dieser Bilder und Vorstellungen – der mentalen Modelle von Museum also –, widmet sich das von Interreg geförderte Forschungsprojekt unter Einbindung vielfältiger Perspektiven und Methoden aus Sozialforschung und Design. Es verfolgt den innovativen Weg, „Designerly Ways of Knowing“0 von Beginn an konsequent in den Forschungsprozess zu integrieren, um anstrebenswerte Museumszukünfte gemeinsam mit den Menschen auszuloten...
Why do some countries assign a major role to wind energy in decarbonizing their electricity systems, while others are much less committed to this technology? We argue that processes of (de-)legitimation, driven by discourse coalitions who strategically employ certain storylines in public debates, provide part of the answer. To illustrate our approach, we comparatively investigate public discourses surrounding wind energy in Austria and Switzerland, two countries that differ strongly in wind energy deployment. By combining a qualitative content analysis and a discourse network analysis of 808 newspaper articles published 2010–2020, we identify four distinct sets of storylines used to either delegitimize or legitimize the technology. Our study indicates that low deployment rates in Switzerland can be related to the prominence of delegitimizing storylines in the public discourse, which result in a rather low socio-political acceptance of wind energy. In Austria, by contrast, there is more consistent support for wind energy by discourse coalitions using a broad set of legitimizing storylines. By bridging the related but separate literatures of technology legitimacy and social acceptance, our study contributes to a better understanding of socio-political conflict and divergence in low-carbon technological pathways.
A step change is needed in the deployment of renewable energy if the triple challenge of ensuring climate change mitigation, energy security, and energy affordability is to be met. Yet, social acceptance of infrastructure projects and policies remains a key concern. While there has been decades of fruitful research on the social acceptance of wind energy and other renewables, much of the extant research is cross-sectional in nature, failing to capture the important dynamic processes that can make or break renewable energy projects. This paper introduces a Special Issue of Energy Policy which focuses on the neglected topic of the dynamics of social acceptance of renewable energy, drawing on contributions made at an international research conference held in St. Gallen (Switzerland) in June 2022. In addition to introducing these papers and drawing out common themes, we also seek to offer some conceptual clarity on the issue of dynamics in social acceptance, taking into account the influence of time, power, and scale in shaping decision-making processes. We conclude by highlighting a number of avenues of potential future research.
X-ray microtomography is a nondestructive, three-dimensional inspection technique applied across a vast range of fields and disciplines, ranging from research to industrial, encompassing engineering, biology, and medical research. Phasecontrast imaging extends the domain of application of x-ray microtomography to classes of samples that exhibit weak attenuation, thus appearing with poor contrast in standard x-ray imaging. Notable examples are low-atomic-number materials, like carbon-fiber composites, soft matter, and biological soft tissues.We report on a compact and cost-effective system for x-ray phase-contrast microtomography. The system features high sensitivity to phase gradients and high resolution, requires a low-power sealed x-ray tube, a single optical element, and fits in a small footprint. It is compatible with standard x-ray detector technologies: in our experiments, we have observed that single-photon counting offered higher angular sensitivity, whereas flat panels provided a larger field of view. The system is benchmarked against knownmaterial phantoms, and its potential for soft-tissue three-dimensional imaging is demonstrated on small-animal organs: a piglet esophagus and a rat heart.We believe that the simplicity of the setupwe are proposing, combined with its robustness and sensitivity, will facilitate accessing quantitative x-ray phase-contrast microtomography as a research tool across disciplines, including tissue engineering, materials science, and nondestructive testing in general.
In this work, parametric excitation is introduced in a fully balanced flexible rotor mounted on two identical active gas foil bearings. The active gas foil bearings change the top foil shape harmonically with a specific amplitude and frequency. The deformable foil shape is approximated by an analytical function, while the gas pressure distribution is evaluated by the numerical solution of the Reynolds equation for compressible flow. The harmonic variation of the foil shape generates a respective variation in the bearings’ stiffness and damping properties and the system experiences parametric resonances and antiresonances in specific excitation frequencies. The nonlinear gas bearing forces generate bifurcations in the solutions of the system at certain rotating speeds and excitation frequencies; period doubling and Neimark-Sacker bifurcations are noticed in the examined system, and their progress is evaluated as the two bifurcation parameters (rotating speed and parametric excitation frequency) are changed, though a codimension-2 numerical continuation of limit cycles. It is found that at specific range of excitation frequency there are parametric anti-resonances and the bifurcations collide and vanish. Therefore, a bifurcation-free operating range is established and the system can operate stable at a wide speed range.
Statistische Methodenkompetenz wird im Controlling zunehmend bedeutender, so ist die evidenzbasierte Prognose durch algorithmische Analyse von Datenbeständen ein Schwerpunkt von Controlling Analytics. Die Fallstudie durchleuchtet daher anhand von Datenmaterial des Schweizer Bundesamts für Statistik das Vorgehen bei einer Datenanalyse, insbesondere beim Einsatz der Zeitregression für Prognosezwecke, und geht dabei auf methodische Besonderheiten, Caveats und Einsatzmöglichkeiten in Microsoft Excel ein. Die Fallbeschreibung und Aufgaben sind im WiSt-Heft Nr. 4/23 zu finden.
Controlling Analytics: Einsatz für Prognosen im Controlling - Teil 1: Fallbeschreibung und Aufgaben
(2023)
Statistische Methodenkompetenz wird im Controlling zunehmend bedeutender, so ist die evidenzbasierte Prognose durch algorithmische Analyse von Datenbeständen ein Schwerpunkt von Controlling Analytics. Die Fallstudie durchleuchtet daher anhand von Datenmaterial des Schweizer Bundesamts für Statistik das Vorgehen bei einer Datenanalyse, insbesondere beim Einsatz der Zeitregression für Prognosezwecke, und geht dabei auf methodische Besonderheiten, Caveats und Einsatzmöglichkeiten in Microsoft Excel ein.
Pooled data from published reports on infants with clinically diagnosed vitamin B12 (B12) deficiency were analyzed with the purpose of describing the presentation, diagnostic approaches, and risk factors for the condition to inform prevention strategies. An electronic (PubMed database) and manual literature search following the PRISMA approach was conducted (preregistration with the Open Science Framework, accessed on 15 February 2023). Data were described and analyzed using correlation analyses, Chi-square tests, ANOVAs, and regression analyses, and 102 publications (292 cases) were analyzed. The mean age at first symptoms (anemia, various neurological symptoms) was four months; the mean time to diagnosis was 2.6 months. Maternal B12 at diagnosis, exclusive breastfeeding, and a maternal diet low in B12 predicted infant B12, methylmalonic acid, and total homocysteine. Infant B12 deficiency is still not easily diagnosed. Methylmalonic acid and total homocysteine are useful diagnostic parameters in addition to B12 levels. Since maternal B12 status predicts infant B12 status, it would probably be advantageous to target women in early pregnancy or even preconceptionally to prevent infant B12 deficiency, rather than to rely on newborn screening that often does not reliably identify high-risk children.
Purpose – The purpose of this study is to explore the exogenous and endogenous drivers of the high-growth of Unicorn start-ups along their life cycle, with a particular focus on Unicorns in the fintech industry.
Design/methodology/approach – The study employs an explorative longitudinal analysis with a matched pair of two cases of Unicorns start-ups with similar antecedent features to understand holistically drivers over the longer term.
Findings – High-growth patterns over the longer term are the result of a combined industry- and company-life cycle perspective. Drivers and growth patterns vary significantly according to the time of entry in the industry and
its development status. The findings are systematised within a set of propositions to be tested in future research.
Research limitations/implications – The limitations lie in empirical evidence, as the analysis is limited to one matched-pair. The revealed Unicorns’ drivers for long-term growth might encourage future research to further investigate these drivers on a larger scale.
Practical implications – The study offers practical recommendations for start-ups with high-growth ambitions and advice to policy makers regarding the development of tailor-made support programs.
Originality/value – The study significantly extends extant work on growth and high-growth by examining endogenous and exogenous triggers over time and by linking the Unicorn-life cycle to the industry life cycle, an approach which has, to the best of the authors’ knowledge, not yet been applied.
Background: Cardiovascular disease is the major cause of death worldwide. Although knowledge regarding diagnosing and treating cardiovascular disease has increased dramatically, secondary prevention remains insufficiently implemented due to failure among affected individuals to adhere to guideline recommendations. This has continued to lead to high morbidity and mortality rates. Involving patients in their healthcare and facilitating their active roles in their chronic disease management is an opportunity to meet the needs of the increasing number of cardio-vascular patients. However, simple recall of advice regarding a more preventive lifestyle does not affect sustainable behavioral lifestyle changes. We investigate the effect of plaque visualization combined with low-threshold daily lifestyle tasks using the smartphone app PreventiPlaque to evaluate change in cardiovascular risk profile. Methods: and study design: This randomized, controlled clinical trial includes 240 participants with ultrasound evidence of atherosclerotic plaque in one or both carotid arteries, defined as focal thickening of the vessel wall measuring 50% more than the regular vessel wall. A criterion for participation is access to a smartphone suitable for app usage. The participants are randomly assigned to an intervention or a control group. While both groups receive the standard of care, the intervention group has additional access to the PreventiPlaque app during the 12-month follow-up. The app includes daily tasks that promote a healthier lifestyle in the areas of smoking cessation, medication adherence, physical activity, and diet. The impact of plaque visualization and app use on the change in cardiovascular risk profile is assessed by SCORE2. Feasibility and effectiveness of the PreventiPlaque app are evaluated using standardized and validated measures for patient feedback.
The production of liquid-gas mixtures with desired properties still places high demands on process technology and is usually realized in bubble columns. The physical calculation models used have individual dimensionless factors which, depending on the application, are only valid for small ranges consisting of flow velocity, nozzle geometry and test setup. An iterative but time-consuming design of such dispersion processes is used in industry for producing a liquid-gas mixture according to desired requirements. In the present investigation, we accelerate the necessary design loops by setting up a physical model, which consists of several subsystems that are enriched by dedicated experiments to realize liquid-gas dispersions with low volume fraction and small air bubble diameters in oil. Our approach allows the extraction of individual dimensionless factors from maps of the introduced subsystems. These maps allow for targeted corrective measures of a production process for keeping the quality. The calculation-based approach avoids the need for performing iterative design loops. Overall, this approach supports the controlled generation of liquid-gas mixtures.
Das Kreisgespräch
(2023)
In the era of digital transformation an evolution takes place. Following this, new perspectives concerning leadership are required, especially in virtual teams. Shared Leadership is a promising leadership form to meet the challenges in a virtual team setting. Particularly, studies show that shared leadership increases performance, team creativity and innovative behavior. Moreover, the responsibility is distributed among several, not one individual. Nevertheless, it is unclear, which skills are needed in shared leadership teams and how they could be trained. Therefore, we develop a conceptual framework to pave the way for an empirical inquiry of the skills for and the role of shared leadership. Moreover, we encourage the discussion, whether the current leadership development is still viable and offer practical implications to develop shared leadership.
Der Schlüssel zur Zukunft
(2023)
A model is presented that allows for the calculation of the success probability by which a vanilla Evolution Strategy converges to the global optimizer of the Rastrigin test function. As a result a population size scaling formula will be derived that allows for an estimation of the population size needed to ensure a high convergence security depending on the search space dimensionality.
Formen des Dialogs
(2023)
Schreiblehre und KI – Teil 3: Erste Schlussfolgerungen aus dieser Erfahrung für die Schreiblehre
(2023)
Praxisanleiter:innen nehmen eine entscheidende Rolle in der Ausbildung von Pflegepersonen wahr. Die Tätigkeit fordert eine Vielzahl von Kompetenzen. Die Weiterbildung Praxisanleitung bietet eine wichtige Grundlage für die Entwicklung dieser Kompetenzen – deren Rahmenbedingungen, Methoden und Inhalte in Österreich werden in dieser Studie untersucht.
Activation of heat pump flexibilities is a viable solution to support balancing the grid via Demand Side Management measures and fulfill the need for flexibility options. Aggregators as interface between prosumers, distribution system operators and balance responsible parties face the challenge due to data privacy and technical restrictions to transform prosumer information into aggregated available flexibility to enable trading thereof. Thereby, literature lacks a generic, applicable and widely accepted flexibility estimation method for heat pumps,which incorporates reduced sensor and system information, system- and demand-dependent behaviour. In this paper, we adapt and extend a method from literature, by incorporating domain knowledge to overcome reduced sensor and system information. We apply data of five real-world heat pump systems, distinguish operation modes, estimate power and energy flexibility of each single heat pump system, proof transferability of the method, and aggregate the flexibilities available to showcase a small HP pool as a proof of concept.
Open tracing tools
(2023)
Background: Coping with the rapid growing complexity in contemporary software architecture, tracing has become an increasingly critical practice and been adopted widely by software engineers. By adopting tracing tools, practitioners are able to monitor, debug, and optimize distributed software architectures easily. However, with excessive number of valid candidates, researchers and practitioners have a hard time finding and selecting the suitable tracing tools by systematically considering their features and advantages. Objective: To such a purpose, this paper aims to provide an overview of popular Open tracing tools via comparison. Methods: Herein, we first identified 30 tools in an objective, systematic, and reproducible manner adopting the Systematic Multivocal Literature Review protocol. Then, we characterized each tool looking at the 1) measured features, 2) popularity both in peer-reviewed literature and online media, and 3) benefits and issues. We used topic modeling and sentiment analysis to extract and summarize the benefits and issues. Specially, we adopted ChatGPT to support the topic interpretation. Results: As a result, this paper presents a systematic comparison amongst the selected tracing tools in terms of their features, popularity, benefits and issues. Conclusion: The result mainly shows that each tracing tool provides a unique combination of features with also different pros and cons. The contribution of this paper is to provide the practitioners better understanding of the tracing tools facilitating their adoption.
Hot water heat pumps are well suited for demand side management, as the heat pump market faced a rapid growth in the past years with the trend to decentralized domestic hot water use. Sales were accelerated through wants and needs of energy conservation, energy efficiency, and less restrictive rules regarding Legionella. While in literature the model predictive control potential for heat pumps is commonly shown in simulations, the share of experimental studies is relatively low. To this day, experimental studies considering solely domestic hot water use are not available. In this paper, the realistic achievable model predictive control potential of a hot water heat pump is compared to the standard hysteresis control, to provide an experimental proof. We show for the first time, how state-of-the-art approaches (model predictive control, system identification, live state estimation, and demand prediction) can be transferred from electric hot water heaters to hot water heat pumps, combined, and implemented into a real-world hot water heat pump setup. The optimization approach, embedded in a realistic experimental setting, leads to a decrease in electric energy demand and cost per unit electricity by approximately 12% and 14%, respectively. Further, an increase in efficiency by approximately 13% has been achieved.
This paper presents design, simulation, and optimization of the three-dimensional 1×4 optical multimode interference splitter using IP-Dip polymer as a core and polydimethylsiloxane (PDMS) Sylgard 184 as a cladding. The splitter was simulated by using beam propagation method in BeamPROP simulation engine of RSoft photonic tool and optimized for an operating wavelength of 1.55 µm. According to the minimum insertion loss, the dimensions of the MMI coupler and the length of the whole MMI splitter structure were optimized applying a waveguide with a core size of 4×4 µm2. The objective of the study is to create a design for fabrication by three-dimensional direct laser writing optical lithography.
We present design of planar 16-channel, 100-GHz multi-mode polymer-based AWG. This AWG was designed for central wavelength of 1550 nm applying AWG-Parameters tool. The AWG structure was created and simulated in the commercial photonic tool PHASAR from Optiwave. Achieved transmission characteristics were evaluated by AWG-Analyzer tool. For the design, multi-mode waveguides having a cross-section of (4x4) µm2 were used. The simulated results show strong worsening of the transmission characteristics in comparison when using single-mode waveguides. Nevertheless, the transmitting channels are clearly separated. The reason for using thicker multi-mode waveguides in the design is possibility to fabricate the AWG structure on polymer basis using direct laser writing lithography.
Coupling is one of the most frequently mentioned metric in software systems. However, to measure logical coupling between microservices, runtime information is needed or the availability of service-log files to analyze the calls between services is required. This work presents our emerging results, in which we propose a metric to statically calculate logical coupling between microservices based on commits to versioning systems. We performed an initial validation of the proposed metric with a dataset containing 145 open-source microservices projects. The results illustrate how logical coupling affects every system and increases overtime. However, we did not find a correlation between the number of commits or the number of developers and the introduction of logical coupling. In future, we investigate why, how, and when logical coupling is introduced in a system.
Die persönliche Black-Box
(2023)
Redundanz und Varietät
(2023)
The paper deals with designing and numerical modelling a 2 x 2 optical switch for photonic integrated circuits based on 2 x 2 MMI elements and phase modulators. The 2 x 2 optical switch was modelled in the RsoftCAD with the simulation tool BeamPROP. The 2 x 2 optical switch is a common element for creating more complex 1 x N or N x N optical switches in all-optical signal processing.
In this paper, the design of three-dimensional configuration of Y-branch splitter is compared with Multimode Interference splitter. Both splitters use the IP-Dip polymer as a standard material for 3D laser lithography. The optical properties of the splitters for both approaches are discussed and compared.
In this work, we investigated the influence of different etch depths of the rib waveguides on the performance of SiN-based AWGs. For this purpose, an 8-channel 100 GHz AWG was designed for a center wavelength of 850 nm. The design parameters entered were calculated using the AWG-Parameters tool. The simulations were performed with a commercial photonic tool PHASAR from Optiwave. The simulated performance was evaluated using the AWG-Analyzer tool. For the AWG design, we used three identical rib waveguides with different etch depths to simulate possible etch imperfection. The simulations show the wavelength shift and degradation of the AWG performance.
Optoelectronic system based on photonic integrated circuits to miniaturize spectral domain OCT
(2023)
We present a miniaturized optical coherence tomography (OCT) setup based on photonic integrated circuits (PIC) for the 850 nm range. We designed a 512-channel arrayed waveguide grating (AWG) on a PIC for spectral domain OCT (SD-OCT) that is co-integrated with PIN-photodiodes and analog-to-digital-converters on one single chip. This image sensor is combined with all the necessary electronics to act as a camera. It is integrated into a fiber-based OCT system, achieving a sensitivity of >80dB and various samples are imaged. This optoelectronic system will allow building small and cost-effective OCT systems to monitor retinal diseases.
The production of liquid-gas dispersions places high demands on the process technology, which requires knowledge of the bubble formation mechanisms, as well as the phase parameters of the media combinations used. To obtain the bubble sizes introduced to a flow not knowing the phase parameters, different process parameters are investigated. Their quality and applicability are evaluated. The results obtained make it possible to simplify long design processes of dispersion processes in manufacturing plants and to ensure the product quality of the products manufactured, by reducing waste.
In previous studies of linear rotary systems with active magnetic bearings, parametric excitation was introduced as an open-loop control strategy. The parametric excitation was realized by a periodic, in-phase variation of the bearing stiffness. At the difference between two of the eigenfrequencies of the system, a stabilizing effect, called anti-resonance, was found numerically and validated in experiments. In this work, preliminary results of further exploration of the parametric excitation are shared. A Jeffcott rotor with two active magnetic bearings and a disk is investigated. Using Floquet theory, a deeper insight into the dynamic behavior of the system is obtained. Aiming at a further increase of stability, a phase difference between excitation terms is introduced.
Bachground: Worldwide, more than 79.5 million people are forcibly displaced, including a significant number of migrant and refugee families with children. Migration and refugeedom affect these families in different dimensions, such as mental, physical and spiritual health. Identifying family needs and enhancing parenting skills can improve family cohesion and health, as well as smooth integration into the host country. This review is part of the Erasmus+ funded project- IENE 8 (Intercultural Education for Nurses in Europe) aiming at empowering migrant and refugee families regarding parenting skills.
Methods: This was a scoping review of literature. The IENE 8 partner countries (Cyprus, Germany, Greece, Italy, Romania, and United Kingdom) searched for peer reviewed papers, grey literature and mass media reports at international, European and national level. The time period for the search of scientific and grey literature was between2013-2018, and for mass media, it was between 2016 and 2018. Results: 124 relevant sources were identified. They included 33 Peer reviewed papers, 47 Grey literature documents and 44 mass media reports. This revealed the importance of understanding the needs of migrant families with children. Conclusion: It is evident from the literature that there is a need to support refugee parents to adjust their existing skill and to empower them to develop new ones. Healthcare and social services professionals have an essential role in improving the refugees' parenting skills. This can be done by developing and implementing family-centered and culturally-sensitive intervention programs.
Ausrechnen oder aushandeln?
(2023)
Highly-sensitive single-step sensing of levodopa by swellable microneedle-mounted nanogap sensors
(2022)
Microneedle (MN) sensing of biomarkers in interstitial fluid (ISF) can overcome the challenges of self-diagnosis of diseases by a patient, such as blood sampling, handling, and measurement analysis. However, the MN sensing technologies still suffer from poor measurement accuracy due to the small amount of target molecules present in ISF, and require multiple steps of ISF extraction, ISF isolation from MN, and measurement with additional equipment. Here, we present a swellable MN-mounted nanogap sensor that can be inserted into the skin tissue, absorb ISF rapidly, and measure biomarkers in situ by amplifying the measurement signals by redox cycling in nanogap electrodes. We demonstrate that the MN-nanogap sensor measures levodopa (LDA), medication for Parkinson disease, down to 100 nM in an aqueous solution, and 1 μM in both the skin-mimicked gelatin phantom and porcine skin.
Calls for decolonising global health have intensified in recent years. The Austrian NGO plan:g Partnership for Global Health has taken several steps to decolonise its work and to find new ways of communicating and engaging in equitable partnerships. Decolonising global health cooperation is however not without its challenges.
This paper aims to study the design, simulation, and optimization of low-loss Y-branch passive optical splitters up to 64 output ports for telecommunication applications. For a waveguide channel profile, the standard material silica-on-silicon is used. The Y-splitters are designed and simulated at telecommunication operating wavelength, λ = 1550 nm. Except for the lengths of the used Y-branches, and a core size of the waveguides, design parameters such as port pitch between the waveguides and simulation parameters for all splitters are considered fixed. The simulation results are analyzed to determine the optimum length of the splitters and the optimum core size. Based on this optimization the total length of the highest designed 1×64 Y-branch splitter was reduced by 41.14 % for a waveguide core (5×5) μm2 compared to the length of splitter with a standard (6×6) μm2 core size.
Vast amounts of oily wastewater are byproducts of the petrochemical and the shipping industry and to this day frequently discharged into water bodies either without or after insufficient treatment. To alleviate the resulting pollution, water treatment processes are in great demand. Bubble column humidifiers (BCHs) as part of humidification–dehumidification systems are predestined for such a task, since they are insensitive to different feed liquids, simple in design and have low maintenance requirements. While humidification in a bubble column has been investigated plentiful for desalination, a systematic investigation of oily wastewater treatment is missing in literature. We filled this gap by analyzing the treatment of an oil–water emulsion experimentally to derive recommendations for future design and operation of BCHs. Our humidity measurements indicate that the air stream is always saturated after humidification for a liquid height of only 10 cm. A residual water mass fraction of 3.5 wt% is measured after a batch run of six hours. Furthermore, continuous measurements show that an increase in oil mass fraction leads to a decrease in system productivity especially for high oil mass fractions. This decrease is caused by the heterogeneity of the liquid temperature profile. A lower liquid height mitigates this heterogeneity, therefore decreasing the heat demand and improving the overall efficiency. The oil content of the produced condensate is below 15 ppm, allowing discharge into various water bodies. The results of our systematic investigation prove suitability and indicate a strong future potential for the use of BCHs in oily wastewater treatment.
Der Einsatz von Robotik im Pflegekontext wird kontrovers diskutiert und löst unterschiedliche Assoziationen aus. In diesem Beitrag stellen wir Ergebnisse aus einer schriftlichen Befragung bei Pflegekräften aus Deutschland vor. Es wird aufgezeigt, für welche Funktionen und Aufgaben sich Pflegekräfte den Einsatz von Roboter vorstellen können und wo gegensätzliche Einstellungen gegenüber Robotern bestehen. Ein Fallbeispiel illustriert ein mögliches Anwendungsfeld. Mit den reflexiven Fragen laden wir die:den Lesenden ein, sich selbst mit der Idee Roboter als Alltagshelfer für ältere Menschen auseinanderzusetzen.
Alles muss raus
(2022)
Wahrheit braucht Vertrauen
(2022)
Der Beitrag untersucht die Unterstützungsbedarfe von Schüler_innen während der Schultransition in Österreich und fragt nach Möglichkeiten zum Aufbau von inklusiven Unterstützungsangeboten. Um diesbezüglich Erkenntnisse zu gewinnen, wurden zwei qualitative Datensätze analysiert: Einerseits ein Datensatz aus 2018, in welchem die Transition von der Volks- in die Sekundarschule und damit verbundene Herausforderungen mittels Interviews mit Schüler_innen und involvierten Erwachsenen untersucht wurden. Andererseits ein Datensatz aus 2020, in dem Praktiker_innen über Veränderungen der psychosozialen Unterstützungsangebote für Kinder und Familien während der Covid-19-Pandemie befragt wurden. Die Daten von 2018 zeigen, dass der Aufbau von positiven sozialen Beziehungen zu Gleichaltrigen eine wichtige Ressource für eine gelungene Schultransition darstellt, jedoch nicht immer gelingt, weshalb Unterstützungsbedarf benannt wird. Zugleich werden Zugangsbarrieren zu vorhandenen Unterstützungsangeboten deutlich, die in Zusammenhang mit drei soziodemografischen Charakteristika stehen: (1) Lebenssituation und geografischer Standort, (2) finanzielle Ressourcen und (3) Migrationshintergrund. Die Daten aus dem Jahr 2020 zeigen, dass es durch den Einsatz digitaler Angebote zu einer Überwindung von Zugangsbarrieren und hemmenden Strukturen kommen kann. Die Betrachtung beider Studienergebnisse lässt somit Implikationen für eine verbesserte, inklusive und innovative Versorgungsstruktur für Adressat_innen der Sozialen Arbeit zu.
Das Nugget-Chart
(2022)
Die Arbeitswelt von morgen
(2022)
Grid-scale electrical energy storage (EES) is a key component in cost-effective transition scenarios to renewable energy sources. The requirement of scalability favors EES approaches such as pumped-storage hydroelectricity (PSH) or compressed-air energy storage (CAES), which utilize the cheap and abundant storage materials water and air, respectively. To overcome the site restriction and low volumetric energy densities attributed to PSH and CAES, liquid-air energy storage (LAES) has been devised; however, it suffers from a rather small round-trip efficiency (RTE) and challenging storage conditions. Aiming to overcome these drawbacks, a novel system for EES is developed using solidified air (i.e., clathrate hydrate of air) as the storable phase of air. A reference plant for solidified-air energy storage (SAES) is conceptualized and modeled thermodynamically using the software CoolProp for water and air as well as empirical data and first-order approximations for the solidified air (SA). The reference plant exhibits a RTE of 52% and a volumetric storage density of 47 kWh per m3 of SA. While this energy density relates to only one half of that in LAES plants, the modeled RTE of SAES is comparable already. Since improved thermal management and the use of thermodynamic promoters can further increase the RTEs in SAES, the technical potential of SAES is in place already. Yet, for a successful implementation of the concept - in addition to economic aspects - questions regarding the stability of SA must be first clarified and challenges related to the processing of SA resolved.
The impact of global warming and climate change has forced countries to introduce strict policies and decarbonization goals toward sustainable development. To achieve the decarbonization of the economy, a substantial increase of renewable energy sources is required to meed energy demand and to transition away from fossil fuels. However, renewables are sensitive to environmental conditions, which may lead to imbalances between energy supply and demand. Battery energy storage systems are gaining more attention for balancing energy systems in existing grid networks at various levels such as bulk power management, transmission and distribution, and for end-users. Integrating battery energy storage systems with renewables can also solve reliability issues related to transient energy production and be used as a buffer source for electrical vehicle fast charging. Despite these advantages, batteries are still expensive and typically built for a single application – either for an energy- or power-dense application – which limits economic feasibility and flexibility. This paper presents a theoretical approach of a hybrid energy storage system that utilizes both energy- and power-dense batteries serving multiple grid applications. The proposed system will employ second use electrical vehicle batteries in order to maximise the potential of battery waste. The approach is based on a survey of battery modelling techniques and control methods. It was found that equivalent circuit models as well as unified control methods are best suited for modelling hybrid energy storages for grid applications. This approach for hybrid modelling is intended to help accelerate the renewable energy transition by providing reliable energy storage.
Increasing electric vehicle penetration leads to undesirable peaks in power if no proper coordination in charging is implemented. We tested the feasibility of electric vehicles acting as flexible demands responding to power signals to minimize the system peaks. The proposed hierarchical autonomous demand side management algorithm is formulated as an optimal power tracking problem. The distribution grid operator determines a power signal for filling the valleys in the non-electric vehicle load profile using the electric vehicle demand flexibility and sends it to all electric vehicle controllers. After receiving the control signal, each electric vehicle controller re-scales it to the expected individual electric vehicle energy demand and determines the optimal charging schedule to track the re-scaled signal. No information concerning the electric vehicles are reported back to the utility, hence the approach can be implemented using unidirectional communication with reduced infrastructural requirements. The achieved results show that the optimal power tracking approach has the potential to eliminate additional peak demands induced by electric vehicle charging and performs comparably to its central implementation. The reduced complexity and computational overhead permits also convenient deployment in practice.
Violation-mitigation-based method for PV hosting capacity quantification in low voltage grids
(2022)
Hosting capacity knowledge is of great importance for distribution utilities to assess the amount of PV capacity possible to accommodate without troubling the operation of the grid. In this paper, a novel method to quantify the hosting capacity of low voltage grids is presented. The method starts considering a state of fully exploited building rooftop solar potential. A downward process is proposed - from the starting state with expected violations on the grid operation to a state with no violations. In this process, the installed PV capacity is progressively reduced. The reductions are made sequentially and selectively aiming to mitigate specific violations: nodes overvoltage, lines overcurrent and transformer overloading. Evaluated on real data of fourteen low voltage grids from Austria, the method proposed exhibits benefits in terms of higher hosting capacities and lower computational costs compared to stochastic methods. Furthermore, it also quantifies hosting capacity expansions achievable by overcoming the effect of the violations. The usage of a potential different from solar rooftops is also presented, demonstrating that a user-defined potential allows to quantify the hosting capacity in a more general setting with the method proposed.
Welche Politikziele geben Fachkräfte der Sozialen Arbeit an Eltern weiter, konkret was wird in Beratungen von Eltern explizit und implizit thematisiert und empfohlen? Der Artikel fokussiert auf die Herstellung von Geschlechterarrangements im Rahmen von Beratungssettings auf zwei Ebenen: einerseits zwischen Fachkräften und Eltern und andererseits zwischen den beratenen Eltern. Ausgehend von einer Heuristik, welche die Wirkung steuerungspolitischer Interventionen als Resultat der Deutung seitens der Adressierten begreift, stellt der Beitrag ein Instrument vor, mit dem Deutungen familienpolitischer Leistungen in der Beratung von Sozialarbeiter:innen und adressierten Eltern reflektiert werden können: das familienpolitische Brettspiel. Damit bietet das Beratungsinstrument eine Hilfestellung zur geschlechtersensiblen Adressierung der Eltern in Bezug auf ihre Arbeitsteilung.
Traditional power grids are mainly based on centralized power generation and subsequent distribution. The increasing penetration of distributed renewable energy sources and the growing number of electrical loads is creating difficulties in balancing supply and demand and threatens the secure and efficient operation of power grids. At the same time, households hold an increasing amount of flexibility, which can be exploited by demand-side management to decrease customer cost and support grid operation. Compared to the collection of individual flexibilities, aggregation reduces optimization complexity, protects households’ privacy, and lowers the communication effort. In mathematical terms, each flexibility is modeled by a set of power profiles, and the aggregated flexibility is modeled by the Minkowski sum of individual flexibilities. As the exact Minkowski sum calculation is generally computationally prohibitive, various approximations can be found in the literature. The main contribution of this paper is a comparative evaluation of several approximation algorithms in terms of novel quality criteria, computational complexity, and communication effort using realistic data. Furthermore, we investigate the dependence of selected comparison criteria on the time horizon length and on the number of households. Our results indicate that none of the algorithms perform satisfactorily in all categories. Hence, we provide guidelines on the application-dependent algorithm choice. Moreover, we demonstrate a major drawback of some inner approximations, namely that they may lead to situations in which not using the flexibility is impossible, which may be suboptimal in certain situations.
Kommunikation ist Begegnung
(2022)
Bubble columns are recently used for the humidification of air in water treatment systems and fuel cells. They are well applicable due to their excellent heat and mass transfer and their low technical complexity. To design and operate such devices with high efficiency, the humidification process and the impact of the operating parameters need to be understood to a sufficient degree. To extend this knowledge, we use a refined and novel method to determine the volumetric air–liquid heat and mass transfer coefficients and the humidifier efficiency for various parametric settings. The volumetric transfer coefficients increase with both of the superficial air velocity and the liquid temperature. It is further shown that the decrease of vapor pressure with an increase of the salinity results in a corresponding decrease in the outlet humidity ratio. In contrast to previous studies, liquid heights smaller than 0.1 m are investigated and significant changes in the humidifier efficiency are seen in this range. We present the expected humidifier efficiency with respect to the superficial air velocity and the liquid height in an efficiency chart, such that optimal operating conditions can be determined. Based on this efficiency chart, recommendations for industrial applications as well as future scientific challenges are drawn.
If left uncontrolled, electric vehicle charging poses severe challenges to distribution grid operation. Resulting issues are expected to be mitigated by charging control. In particular, voltage-based charging control, by relying only on the local measurements of voltage at the point of connection, provides an autonomous communication-free solution. The controller, attached to the charging equipment, compares the measured voltage to a reference voltage and adapts the charging power using a droop control characteristic. We present a systematic study of the voltage-based droop control method for electric vehicles to establish the usability of the method for all the currently available residential electric vehicle charging possibilities considering a wide range of electric vehicle penetrations. Voltage limits are evaluated according to the international standard EN50160, using long-term load flow simulations based on a real distribution grid topology and real load profiles. The results achieved show that the voltage-based droop controller is able to mitigate the under voltage problems completely in distribution grids in cases either deploying low charging power levels or exhibiting low penetration rates. For high charging rates and high penetrations, the control mechanism improves the overall voltage profile, but it does not remedy the under voltage problems completely. The evaluation also shows the controller’s ability to reduce the peak power at the transformer and indicates the impact it has on users due to the reduction in the average charging rates. The outcomes of the paper provide the distribution grid operators an insight on the voltage-based droop control mechanism for the future grid planning and investments.
Sie werden beobachtet
(2022)
In recent years, ultrashort pulsed lasers have increased their applicability for industrial requirements, as reliable femtosecond and picosecond laser sources with high output power are available on the market. Compared to conventional laser sources, high quality processing of a large number of material classes with different mechanical and optical properties is possible. In the field of laser cutting, these properties enable the cutting of multilayer substrates with changing material properties. In this work, the femtosecond laser cutting of phosphor sheets is demonstrated. The substrate contains a 230 micrometer thick silicone layer filled with phosphor, which is embedded between two glass plates. Due to the softness and thermal sensitivity of the silicone layer in combination with the hard and brittle dielectric material, the separation of such a material combination is challenging for both mechanical separation processes and cutting with conventional laser sources. In our work, we show that the femtosecond laser is suitable to cut the substrate with a high cutting edge quality. In addition to the experimental results of the laser dicing process, we present a universal model that allows predicting the final cutting edge geometry of a multilayer substrate.
Entangled photon generation at 1550 nm in the telecom C-band is of critical importance as it enables the realization of quantum communication protocols over long distance using deployed telecommunication infrastructure. InAs epitaxial quantum dots have recently enabled on-demand generation of entangled photons in this wavelength range. However, time-dependent state evolution, caused by the fine-structure splitting, currently limits the fidelity to a specific entangled state. Here, we show fine-structure suppression for InAs quantum dots using micromachined piezoelectric actuators and demonstrate generation of highly entangled photons at 1550 nm. At the lowest fine-structure setting, we obtain a maximum fidelity of 90.0 ± 2.7% (concurrence of 87.5 ± 3.1%). The concurrence remains high also for moderate (weak) temporal filtering, with values close to 80% (50%), corresponding to 30% (80%) of collected photons, respectively. The presented fine-structure control opens the way for exploiting entangled photons from quantum dots in fiber-based quantum communication protocols.
Arrayed Waveguide Grating (AWG) is a passive optical component, which have found applications in a wide range of photonic applications including telecommunications and medicine. Silica-on-Silicon (SoS) based AWGs use a low refractive-index contrast between the core (waveguide) and the cladding which leads to some significant advantages such as low propagation losses and low fiber coupling losses between the AWG waveguides and the fibres. Therefore, they are an attractive DWDM solution offering higher channel count technology and good performance characteristics compared to other methods. However, the very low refractive-index contrast means the bending radius of the waveguides needs to be very large (on the order of several millimeters) and may not fall below a particular critical value to suppress bending losses. As a result, silica-based waveguide devices usually have a very large size that limits the integration density of SiO2-based photonic integrated devices. High-index contrast AWGs (such as silicon, silicon nitride or polymer-based waveguide devices) feature much smaller waveguide size compared to low index contrast AWGs. Such compact devices can easily be implemented on a chip and have already found applications in emerging applications such as optical sensors, devices for DNA diagnostics and optical spectrometers for infrared spectroscopy.In this work, we present the design, simulation, technological verification and applications of both, the low-index contrast and high-index contrast AWGs. For telecommunication applications AWG-MUX/Demux with up to 128-channels will be presented. For medical applications the AWG-spectrometer with up to 512-channels will be presented.This work was carried out in the framework of the projects: ADOPT No. SK-AT-20-0012, NOVASiN No. SK-AT-20-0017 and AUTOPIC No. APVV-17-0662 from Slovak research and development agency of Ministry of Education, Science, Research and Sport of the Slovak Republic and No. SK 07/2021 and SK 08/2021 from Austrian Agency for International Cooperation in Education and Research (OeAD-GmbH); and project PASTEL, no. 2020-10-15-001, funded by SAIA.
A Telecom optical fibers are still being the best transmission medium of digital data and analogue signals for long distance applications. Progress in integrated photonics enables development of photonic chips with new unique properties, circuits of the future, and overcomes current limits in information and communication technologies. The packaging of photonic chips is necessary for taking them out of research laboratories into real implementation in the information and communication technology applications. One important step of packaging is effective coupling of optical radiation between telecom optical fiber with ten microns core dimension and photonic chip optical waveguide with submicron dimensions. For complex photonic chips, it is necessary to couple not one optical fiber but several optical fibers, which are arranged in fiber arrays. In this case, it is necessary to use a 6D positioning system, which allows to optimally adjust the relative position of the photonic chip and the fiber arrays. After setting the optimal relative position of the photonic chip and the fiber array, the process of their fixation follows. One possibility of fixation is gluing with an adhesive in the optical path between the photonic chip and an array of optical fibers with a refractive index close to the refractive index of the optical fiber core. This paper is focused on the experimental test set-up for the temperature characterization of fiber array to photonics chip butt coupling at 1310 nm and 1550 nm wavelengths fixed themselves by UV adhesive in the optical path. The main aims of this works are selection of better adhesive from two types for gluing of photonic chip and fiber array in packaging process of photonics chips and validation of gluing process developing. The coupling and alignment of fiber arrays to photonics chip were done by automated active alignments system and they were fixed themselves by curable epoxy adhesive. Temperature changes of coupling insertion losses are measured and investigated for two different UV adhesives during three temperature cycles from -40 °C to 80 °C in climatic chamber according to Telcordia. Spectral dependence of insertion losses were measured and compared before and after three temperature cycles for 1530 nm to 1570 nm spectral range at room temperature.
This work was supported by the Slovak Research and Development Agency under the contracts APVV-17-0662 and SK-AT-20-0017 and by the COST Action “European Network for High Performance Integrated Microwave Photonics” (EUIMWP) CA16220.
Today, optics and photonics is widely regarded as one of the most important key technologies for this century. Many experts even anticipate that the 21st century will be century of photon much as the 20th century was the century of electron. Optics and photonics technologies affect almost all areas of our life and cover a wide range of applications in science and industry, e.g. in information and communication technology, in medicine, life science engineering as well as in energy and environmental technology. However even so attractive, the photonics is not well known by most people. To motivate especially young generation for optics and photonics we worked out a lecture related to the “light” for children aged eight to twelve years. We have prepared many experiments to explain the nature of light and its applications in our everyday life. Finally, we focused on the optical data transmission, i.e. how modern communication over optical networks works. To reach many children at home we recorded this lecture and offered it as a video online in the frame of children’s university at Vorarlberg University of Applied Sciences. By combining the hands-on teaching with having a fun while learning about the basic optics concepts we aroused interest of many children with a very positive feedback.