Refine
Year of publication
Document Type
- Conference Proceeding (373) (remove)
Institute
- Forschungszentrum Mikrotechnik (134)
- Technik | Engineering & Technology (80)
- Forschungszentrum Business Informatics (64)
- Department of Computer Science (Ende 2021 aufgelöst; Integration in die übergeordnete OE Technik) (60)
- Wirtschaft (49)
- Forschungszentrum Human Centred Technologies (48)
- Forschungsgruppe Empirische Sozialwissenschaften (24)
- Forschungszentrum Energie (24)
- Department of Engineering (Ende 2021 aufgelöst; Integration in die übergeordnete OE Technik) (19)
- Didaktik (mit 31.03.2021 aufgelöst; Integration ins TELL Center) (15)
Has Fulltext
- no (373) (remove)
Is part of the Bibliography
- yes (373)
Keywords
- arrayed waveguide gratings (9)
- Y-branch splitter (6)
- integrated optics (6)
- photonics (6)
- MMI splitter (5)
- AWG design (4)
- insertion loss (4)
- Arrayed waveguide gratings (3)
- Artificial Intelligence (incl. Robotics) (3)
- Crosstalk (3)
Parametric anti-resonance is a phenomenon that occurs in systems with at least two degrees of freedom; this can be achieved by periodically exciting some parameters of the system. The effect of this properly tuned periodicity is to increase the dissipation in the system, which leads to a raising in the effective damping of vibrations. This contribution presents the design of an open-loop control to reduce the settling time using the anti-resonance concept. The control signal consists of a quasi-periodic signal capable of transferring the system’s oscillations from one mode to another mode of the system. The general averaging technique is used to characterize the dynamics, particularly the so-called slow dynamics of motion. With this analysis, the control signal is designed for the potential application of a microelectromechanical sensor arrangement; for this specific example, up to 96.8% reduction of settling time is achieved.
By a simple femtosecond laser process, we fabricated metal-oxide/gold composite films for electrical and optical gas sensors. We designed a dripple wavelength AWG-spectrometer, matched to the plasma absorption wavelength region of the composite films. H2/CO absorptions fit well with the AWG design for multi gas detection sensor arrays
The main aims of this work are the validation of the developed process of gluing a single-mode optical fiber array with a photonic chip and the selection of a more suitable adhesive from the two adhesives being compared. An active alignment system was used for adjusting the two optical fiber arrays to a photonics chip. The gluing was done by two compared UV curable adhesives applied in the optical path. The insertion losses of glued coupling were measured and investigated at two discrete wavelengths 1310 nm and 1550 nm during temperature testing in the climatic chamber according to Telcordia GR_1209_Corei04 [3]. The measurement, investigation, and comparison of insertion losses of the glued coupling at the spectral band from 1530 nm to 1570 nm were done immediately after gluing process and after three temperature cycles in the climatic chamber with one month delay.
In 2021, a prominent Austria dairy producer suffered from an IT attack and was completely paralysed. Without clearly defined mitigation measures in place, major disruptions were caused alongside the whole supply chain, including logistics service providers, governmental food safety bodies, as well as retailers (i.e., supermarkets and convenience stores). In this paper, we ask the question how digitisation and digital transformation impact IT security, especially when considering the complex company ecosystems of food production and food supply chains in Austria. The problem statement stems from a gap in knowledge of key differences in approaches towards IT security, resilience, risk management and especially business interfaces between food suppliers, supermarkets, distributors, logistics and other service providers. In order to answer related research questions, firstly, the authors conduct literature research, and highlight common guidelines and standardisation as well as look at state-based recommendations for critical infrastructure. In a second step, the paper describes a quantitative and qualitative survey with Austrian food companies (producers and retailers) which is described in detail in the paper. A description of recommended measures for the industry, further steps, as well as an outlook conclude the paper.
Im vorliegenden Paper wird ein Vergleich zwischen Produktions-und Simulationsdaten präsentiert welches im Rahmen einer größeren Initiative zur Verwendung von Shopfloor Daten bei einem Projektpartner in der Automobilindustrie umgesetzt wurde. In diesem Projekt wurden die Daten die während der Füllbildsimulation entstehen mit den Daten aus der finalen Werkzeugabnahme verglichen um zu analysieren, wie genau diese miteinander über einstimmen. Je besser die Simulation ist, desto schneller kann der gesamte Werkzeugentwicklungsprozess abgewickelt werden, welcher als Kernprozess massives Einsparungspotenzial und damit Wettbewerbsvorteil mit sich bringt.
The usage of data gathered for Industry 4.0 and smart factory scenarios continues to be a problem for companies of all sizes. This is often the case because they aim to start with complicated and time-intensive Machine Learning scenarios. This work evaluates the Process Capability Analysis (PCA) as a pragmatic, easy and quick way of leveraging the gathered machine data from the production process. The area of application considered is injection molding. After describing all the required domain knowledge, the paper presents an approach for a continuous analysis of all parts produced. Applying PCA results in multiple key performance indicators that allow for fast and comprehensible process monitoring. The corresponding visualizations provide the quality department with a tool to efficiently choose where and when quality checks need to be performed. The presented case study indicates the benefit of analyzing whole process data instead of considering only selected production samples. The use of machine data enables additional insights to be drawn about process stability and the associated product quality.
Tap or swipe
(2023)
Der vorliegende Beitrag stellt das Konzept eines Flipped Classroom-Ansatzes für die Lehrveranstaltung „Grundlagen der Wirtschaft und finanziellen Unternehmensführung“ im Masterstudiengang Wirtschaftsinformatik der Fachhochschule Vorarlberg vor. Es werden die Rahmenbedingungen der Lehrveranstaltung erläutert und die didaktischen Überlegungen sowie Zielsetzungen diskutiert. Besonderes Augenmerk wird auf die Vorteile des Blended Learning sowie die Bedeutung von Feedback gelegt. Anschließend werden die Inhalte, der Aufbau sowie die verwendeten Materialien und Tools beschrieben. Es wird gesondert auf den Feedbackprozess eingegangen. Abschließend erfolgt eine Bewertung des Lehrveranstaltungskonzepts anhand der Dimensionen technischer Ablauf, Engagement der Studierenden, Klausurerfolg und Lehrveranstaltungsevaluation. Auf dieser Basis werden mögliche Verbesserungen für die Zukunft abgeleitet. Insgesamt wird deutlich, dass der Flipped Classroom-Ansatz eine effektive Methode ist, die mit Standardtools umgesetzt werden kann und die den Lernerfolg und die Zufriedenheit der Studierenden fördert.
Digital twin as enabler of business model innovation for infrastructure construction projects
(2023)
Emerging technologies and methods are becoming an important element of the construction industry. Digital Twins are used as a base to store data in BIM models and make use out of the data respectively make the data visible. The transparency in all phases of the lifecycle of building and infrastructure assets is crucial in order to get a more efficient lifecycle of planning, construction and maintenance. Whereas other industries increased performance in these phases by making use out of the data, construction industry is stuck in traditional methods and business models. In this paper we propose a concept that focuses on the digital production twin. The comparison of planning data with As-Is production data can empower a data driven continuous improvement process and support the decision making process of future innovations and suitable business models. This paper outlines the possibility to use the data stored in a digital twin with regards to the evaluation of possible business models.
Through mandatory ESG (environmental, social, governance) reporting large companies must disclose their ESG activities showing how sustainability risks are incorporated in their decision-making and production processes. This disclosure obligation, however, does not apply to small and medium-sized enterprises (SME), creating a gap in the ESG dataset. Banks are therefore required to collect sustainability data of their SME customers independently to ensure complete ESG integration in the risk analysis process for loans. In this paper, we examine ESG risk analysis through a smart science approach laying the focus on possible value outcomes of sustainable smart services for banks as well as for their (SME) customers. The paper describes ESG factors, how services can be derived from them, targeted metrics of ESG and an ESG Service Creation Framework (business ecosystem building, process model, and value creation). The description of an exemplary use case highlighting the necessary ecosystem for service creation as well as the created value concludes the paper.
The role of entrepreneurs and intrapreneurs in the current zeitgeist is to drive innovation, re-shape rigid, established processes in business as well as for consumers. They use new viewpoints to pioneer new (business) models which focus on ‘smartness’ rather than the purely monetary and short-sighted models of yesteryear. Fostering and supporting the culture of this current zeitgeist is a mayor challenge for entre- and intrapreneurial support infrastructures, namely startup centres and innovation hubs of universities and other public institutions as well as innovation centres of private companies. Hereby, support may range from access to funding over provision of resources such as offices or computing hardware to coaching in the development of business ideas and strategic roadmaps for product and service deployment. In this paper, we focus on describing the status-quo of afore- mentioned support infrastructures in Vorarlberg and the Lake Constance region, then extend the scope to existing (international) approaches for aiding founders and inno- vators in the development of smart services. An analysis of success stories of the Vorarlberg startup centre ‘startupstube’ and other initiatives including their compar- ison to international counterparts builds the basis for a methodological framework for (service science) coaching in entre- and intrapreneurial support infrastructures. The paper is concluded by the description of a framework for choosing the right methods and tools to create service value in entre-/intrapreneurship based upon tested, proven know-how and for defining support infrastructure needs based upon pre-defined stakeholder and target groups as well as the (industry) sectors of the innovators.
In this paper, a 256-channel, 10-GHz arrayed waveguide gratings demultiplexer for ultra-dense wavelength division multiplexing was designed using an in-house developed tool called AWG-Parameters. The AWG demultiplexer was designed for a central wavelength of 1550 nm and the structure was simulated in PHASAR tool from Optiwave. Two different AWG designs were developed and the influence of the design parameters on the AWG performance was studied.
Design, simulation, and optimization of the 1×4 optical three-dimensional multimode interference splitter using IP-Dip polymer as a core and polydimethylsiloxane (PDMS) Sylgard 184 as a cladding is demonstrated. The splitter was simulated by using beam propagation method in BeamPROP simulation module of RSoft photonic tool and optimized for an operating wavelength of 1.55 μm . According to the minimum insertion loss, the dimensions of the splitter were optimized for a waveguide with a core size of 4×4 μm2 . The objective of the study is to create the design for fabrication by three-dimensional direct laser writing optical lithography.
Semiconducting metal oxides are widely used for solar cells, poto-catalysis, bio-active materials and gas sensors. Besides the material properties of the used semiconductor,the specific surface topology of the sensor determines the device performance. We investigate the preparation and transfer suitable metals onto LIPPS structures on glass for gas sensing applications.
Deep etched structures in GaAs with high aspect ratio have promising applications in optoelectronics and MEMS devices. The key factors in their fabrication process are the choosing of proper mask material and etching conditions which results in high selectivity and an anisotropic etch profile with smooth sidewalls. In this work, we studied several types of mask materials (Al, Ni, Cr, SiO2) for deep reactive ion etching of GaAs using inductively coupled plasma system. Thus, several sets of experiments were performed with varying gas mixture, pressure and ICP/RF power. As a result, we find optimized conditions and minimal thickness of mask material for achieving deep etched (>140 m) GaAs structures.
Various carbon (nano-) forms, so-called allotropes, have become one of the most supporting activities in fundamental and applied research trends. Therefore, a universal deposition process capable of “adjusting” system parameters in one “deposition chamber” is highly demanding. Here, we present a low-pressure large area deposition system combining radiofrequency (RF) and microwave (MW) plasma in one chamber in different configurations, which offers a wide deposition window for the growth of sp2 carbon (carbon nanotubes, amorphous carbon), a mixture of sp2 and sp3 (diamond-like films) and pure sp3 carbon represented by diamond films. We will show that not only the type of plasma source (RF vs. MW) but also the gas mixture and plasma chemistry are crucial parameters for the controllable and reproducible growth of these allotropes at temperatures from 250 to 800 °C.
The properties of SiC and diamond make them attractive materials for MEMS and sensor devices. We innovated specific laser ablation techniques to fabricate membranes and cantilevers made of SiC or nano-(micro-) crystalline diamond films grown on Si/SiO2 substrates by microwave chemical vapour deposition (MWCVD). We started research to generate surface moulds to grow corrugated diamond films for membranes and cantilevers. A software tool was developed to support the design of micromechanical cantilevers. We can measure deformation and resonant frequency of diamond cantilevers and identify the global mechanical properties. A benchmark against finite element simulations enables an inverse identification of the specific system parameters and simplifies the characterization procedure.
The properties of diamond make it an attractive material for MEMS and sensor devices. We present the feasibility to fabricate membranes and cantilevers made of nano-(micro-) crystalline diamond films grown on Si/SiO2 substrates using microwave chemical vapour deposition (MWCVD). The patterning of micromechanical structures was performed by a combined process of femtosecond laser ablation and wet etching. We designed cantilever structures with varying lengths and widths (25, 50, 100, 200 and 300 μm). The cantilevers were made in a symmetric left- and right-hand configuration. An additional laser treatment was used to modify the mechanical properties of the left-hand cantilever. The deflection of the laser-treated, and non-treated sections was measured. The global mechanical system properties were simulated and corresponded with high accuracy to the measured results of deflection.
Purpose: Although there is an apparent potential in using data for advanced services in manufacturing environments, SMEs are reluctant to share data with their ecosystem partners, which prevents them from leveraging this potential. Therefore, the purpose of this paper is to analyse the reasons behind these resistances. The argumentation paves the way for elaborating countermeasures that are adequate for the specific situation and the typical capabilities of SMEs.
Design/Methodology/Approach: The analysis is based on literature research and in-depth interviews with management representatives of 15 companies in manufacturing service ecosystems. Half of these are manufacturers and the other half technology or service providers for manufacturers. They are SMEs or partly larger companies operating in structures that are typical for SMEs.
Findings: Data sharing hurdles are investigated in the five dimensions, 1. quantifying the value of data, 2. willingness to share data and trust, 3. organizational culture and mindset, 4. legal aspects, and 5. security and privacy. The ability to quantify the value of data is a necessary but not sufficient precondition for data sharing, which must be enabled by adequate measures in the other four dimensions.
Originality/Value: The findings of this empirical study and the solution approach provide an SME-specific framework to analyze hurdles that must be overcome for sharing data in an ecosystem.
Manufacturing SMEs can apply the framework to overcome the hurdles by specific insights and solution approaches. Furthermore, the analysis illustrates the future research direction of the project towards a comprehensive solution approach for data sharing in a manufacturing ecosystem.
The design and development of smart products and services with data science enabled solutions forms a core topic of the current trend of digitalisation in industry. Enabling skilled staff, employees, and students to use data science in their daily work routine of designing such products and services is a key concern of higher education institutions, including universities, company workshop providers and in further education. The scope and usage scenario of this paper is to assess software modules (‘tools’) for integrated data and analytics as service (DAaaS). The tools are usually driven by machine learning, may be deployed in cloud infrastructures, and are specifically targeted at particular needs of the industrial manufacturing, production, or supply chain sector.
The paper describes existing theories and previous work, namely methods used in didactics, work done for visually designing and using machine learning algorithms (no-code / low- code tools), as well as combinations of these two topics. For tools available on the market, an extended assessment of their suitability for a set of learning scenarios and personas is discussed.
Smart services disrupt business models and have the potential to stimulate the circular economy transition of regions, enabling an environmentally friendly atmosphere for sustainable and innovation-driven growth of regions. Although smart services are powerful means for deploying circular economy goals in industrial practices, there is little systematic guidance on how the adoption of smart services could improve resource efficiency and stimulate smart regional innovation-driven growth, enabled through circular design. Implemented in the scope of Vorarlberg’s smart specialization strategy, this paper contributes to the literature on the circular economy and regional innovation-driven growth by assessing critical factors of the value creation and value capture implemented within the scope of the quadruple helix system. By identifying the main challenges and opportunities of collaborative value creation and value capture in setting-up smart circular economy strategies and by assessing the role of innovation actors within the quadruple helix innovation system, the study provides recommendations and set of guidelines for managers and public authorities in managing circular transition. Finally, based on the analysis of the role of actors in creating shared value and scaling-up smart circular economy practices in the quadruple helix innovation systems, the paper investigates the role of banks as enablers of circular economy innovation-driven regional growth and smart value creation.
Small and medium-sized enterprises often face resource deficits and there- fore depend on cooperating with other actors to stay innovative in a competitive environment. Establishing and maintaining actual co-creation and service inter- action strategies however is challenging. A reason for this is the complexity of finding methodologies and tools to create valuable outcome and the lack of knowledge of collaboration toolsets, also in virtual environments. This paper introduces an Innovation-Method-Framework consisting of innovation methods for increased service interaction and value co-creation among service stakeholders. Also, toolsets for the framework’s practical application are provided.
Recent developments in the area of Natural Language Processing (NLP) increasingly allow for the extension of such techniques to hitherto unidentified areas of application. This paper deals with the application of state-of-the-art NLP techniques to the domain of Product Safety Risk Assessment (PSRA). PSRA is concerned with the quantification of the risks a user is exposed to during product use. The use case arises from an important process of maintaining due diligence towards the customers of the company OMICRON electronics GmbH.
The paper proposes an approach to evaluate the consistency of human-made risk assessments that are proposed by potentially changing expert panels. Along the stages of this NLP-based approach, multiple insights into the PSRA process allow for an improved understanding of the related risk distribution within the product portfolio of the company. The findings aim at making the current process more transparent as well as at automating repetitive tasks. The results of this paper can be regarded as a first step to support domain experts in the risk assessment process.
The paper shows concepts of optical splitting based on three dimensional (3D) optical splitters based on multimode interference principle. This paper is focused on the design, fabrication and characterization of 3D MMI splitter with formed output waveguides based on IP-Dip polymer for direct application on optical fiber. The MMI optical splitter was simulated and fabricated using direct laser writing process. Output characteristics were characterized by highly resolved near-field scanning optical microscope (NSOM) and compared with 3D MMI splitter without output waveguides.
We present 256-channel, 25-GHz AWG designed for ultra-dense wavelength division multiplexing. For the design two in-house developed tools were used: AWG-Parameters tool for the calculation of input design parameters and AWGAnalyser tool, used to evaluate the simulated transmission characteristics. The AWG structure was designed for AWG central wavelength of 1550 nm and simulated with PHASAR tool from Optiwave. To keep the size of AWG structure as small as possible the number of waveguides in the phased array was tested. The simulations show that there is a certain minimum number of phased array waveguides necessary to reach sufficient AWG performance. After optimization, the AWG structure reached 10 cm x 11 cm in size and satisfying optical properties.
This paper describes two different designs of 1×8 passive optical splitters. The first splitter consists of cascade arranged directional waveguide branches (Y-branch splitter) with (0.8×0.16) µm2 waveguide cross-section. The second splitter is based on multimode interference occurring in a large MMI coupler, which uses a self-imaging effect for beam propagation, exhibiting the same waveguide core size as a Y-branch splitter. The waveguide channel profile, used in both approaches, is based on a silicon nitride material platform, with a refractive index of core being nc = 1.925 and a refractive index of cladding ncl = 1.4575. The splitters are designed as a planar structure for a medical operating wavelength 850 nm. Design, simulation, and optimization of passive optical components are performed by a commercial photonic software tool BeamPROP simulation engine by RSoft Photonics Suite tool, employing beam propagation method. This work aims to find the minimum physical dimensions of the designed splitters with the satisfactory optical performance. According to the minimum insertion loss and minimum non-uniformity, the optimum length of the splitters is determined. Finally, the optical properties of splitters for both approaches are discussed and compared with each other.
ROS 2 in Embedded Systemen
(2022)
Das Robot Operating System in seiner zweiten Version (ROS 2) findet zunehmend Verwendung und das nicht nur in Robotern. Dieser Beitrag gibt einen Überblick über den Aufbau und die Funktion von ROS 2. Die wesentlichen Elemente werden vorgestellt, das Publish-Subscribe-Konzept, das der Kommunikation zugrunde liegt, wird erläutert. Die Anforderungen von ROS 2 an Hardware und Betriebssystem werden beleuchtet und es werden Betrachtungen zu dessen Echtzeitverhalten gemacht.
Due to the increasing trend of photonic element miniaturisation and the need for optical splitting, we propose and simulate a new type of three-dimensional (3D) optical splitter based on multimode interference (MMI) for the wavelength of 1550 nm. We present various designs and simulations of various parameters for the optimized MMI splitter. We focus on the possibility of its integration on an optical fiber. The design is focused on a possible production process using 3D laser lithography for the prepared experiments. The MMI splitter was prepared by laser lithography using direct writing process and finally investigated by output characterisation by the near-field measurement.
In this paper, we document optical splitters based on Y-branch and also on MMI splitting principle. The 1×4 Y-branch splitter was prepared in 3D geometry fully from polymer approaching the single mode transmission at 1550 nm. We also prepared new concept of 1×4 MMI optical splitter. Their optical properties and character of output optical field were measured by near-field scanning optical microscope. Splitting properties and optical outputs of both splitters are very promising and increase an attractiveness of presented 3D technology and polymers.
The paper deals with the optimization of 2x2 optical switch for photonic integrated circuits based on two 2x2 MMI splitters and two phase-modulators. The optical switch was modelled in the RSoftCAD with the simulation tool BeamPROP. The optimization was done to minimise the insertion losses and broaden the spectral band at 1550 nm by using linear tapers in a 2x2 MMI splitter topology. The 2x2 optical switch is a common element for creating more complex 1xN or NxN optical switches in all-optical signal processing.
Design, simulation, and optimization of the 1×4 optical three-dimensional multimode interference splitter using IP-Dip polymer as a core and polydimethylsiloxane (PDMS) Sylgard 184 as a cladding is demonstrated. The splitter was simulated by using beam propagation method in BeamPROP simulation module of RSoft photonic tool and optimized for an operating wavelength of 1.55 μm . According to the minimum insertion loss, the dimensions of the splitter were optimized for a waveguide with a core size of 4×4 μm2 . The objective of the study is to create the design for fabrication by three-dimensional direct laser writing optical lithography.
In this paper we present various educational activities with Photonics Explorer, an educational kit developed by the photonics research team B - PHOT at VUB (Vrije Universiteit Brussel) for students at secondary schools. The concept is a ‘lab-in-a-box’ that enables students of the 2 nd and 3 rd grade to do photonics experiments themselves at school with lasers, LEDs, lenses, optical fibers, and other high-tech components. Even though, the kit was developed for the secondary schools, we use experiments from the kit also for some other teaching activities such as lectures at the university, photonics workshops for teachers and children at primary/secondary schools or for events such as children's/youth's university or the night of sciences. In the frame of Austrian based project Phorsch! we have organized most of these activities which will be presented here.
A new software tool, called AWG-Channel-Spacing, is developed to calculate accurate channel spacing of an arrayed waveguide gratings (AWG) optical multiplexer/demultiplexer. This tool has been developed with the application framework QT in the programming language C++. The tool was evaluated with a design of 20-channel 200 GHz AWG. The achieved simulated transmission characteristics prove the correct functionality of the tool.
A new software tool, called AWG-Wuckler, is developed to calculate geometric parameters of arrayed waveguide grating structures for telecommunication and medical applications. These parameters are crucial for a AWG layout which will be created and simulated using commercial photonic design tools. The design process of AWG is very complex because its geometric dimensions depend on a large number of input design parameters and other input design parameters. Often geometric constraints require an adjustment of the input design parameters and vice versa. Calculation and adjustment of the geometric parameters is a time-consuming process that is currently not fully supported by any commercial photonic tool. AWG-Wuckler tool overcomes this issue and offers a fast and easy to use solution. The tool was already applied in various AWG designs and is technologically well proven.
Die vorliegende Studie untersucht die Auswirkungen der Covid-Pandemie auf die Finanzierungssituation von Unternehmen in Vorarlberg. Besonderes Augenmerk wird dabei auf kleine und mittlere Unternehmen sowie deren Eigenkapitalausstattung gelegt. Die Analyse erfolgt anhand einer quantitativen Befragung von 569 Unternehmen im Zeitraum Ende Oktober/Anfang November 2021. Ein Großteil der befragten Unternehmen schätzt die Finanzierungssituation insgesamt als befriedigend oder besser ein. Eigenkapital wird die höchste Relevanz aller Finanzierungsquellen zugesprochen. Obwohl 39% der befragten Unternehmen eine Eigenkapitalerhöhung für Ihr Unternehmen als nötig erachten, haben aktuell nur 14% Überlegungen in diese Richtung. Die Ergebnisse der Studie weisen darauf hin, dass eine Beseitigung der steuerlichen Bevorzugung von Fremdkapital (Debt Bias) einen relevanten Anreiz für Eigenkapitalerhöhungen liefern könnte.
To create a map of an unknown area, autonomous robots must follow a strategy to explore the area without knowing the optimal paths to reduce the time needed to map the whole area. To reduce the time to accomplish this task, multiple robots can work together to create a map in a more efficient way. However, without proper coordination, the time a team of autonomous robots needs to explore the unknown area can exceed the time needed by a single robot. To counteract the challenges, a shared infrastructure is needed which extracts useful information for the individual robots out of the shared information of all robots so the exploration can be coordinated. These measures introduce new challenges to the system, concerning the load of the communication infrastructure as well as the overall task of exploring and mapping becoming dependent on the correct communication and robustness of the shared team infrastructure. Therefore, the amount of communication and dependency of each individual robot of the rest of the other robots of the team must be reduced to ensure that the robots can continue working even if the communication with the shared infrastructure fails.
As the boundary between real and virtual life is becoming increasingly blurred, researchers and practitioners are looking for ways to integrate the two intending to improve human lives in a plethora of domains. A cutting-edge concept is the design of Digital Twins (DT), having a broad range of implications and applications, spanning from education, training, as well as safety and productivity in the workplace. An emergent approach for implementing DTs is the usage of mixed reality (MR) and augmented reality (AR), which are well aligned with merging real and virtual objects to enhance the human’s ability to interact with and manage DTs. Yet, this is still a novel area of research and, as such, a grounded understanding of the current state, challenges, and open questions is still lacking. Towards this, we conducted a PRISMA-based literature review of scientific articles and book chapters dealing with the use of MR and AR for digital twins. After a thorough screening phase and eligibility check, 25 papers were analyzed, sorted and compared by different categories like research topic (e.g., visualization, guidance), domain (e.g., manufacturing, education), paper type (e.g., design study, evaluation), evaluation type (user study, case study or none), used hardware (e.g., Microsoft HoloLens, mobile devices) as well as the different outcomes (result type and topic, problems, outlook). The major finding of this research survey is the predominant focus of the reviewed papers on the technology itself and the neglect of factors regarding the users. We, therefore, encourage researchers in this area to keep the importance of ease and joy of use in mind and include users in multiple stages of their work.
PV hosting capacity provides utilities the knowledge of the maximum amount of solar installations possible to accommodate in low voltage grids such that no operational problems arise. As the quantification of the hosting capacity requires data collection, grid modelling, and often time-consuming simulations, simplified estimations for large-scale applications are of interest. In this paper, Bayesian statistical inference is applied to estimate the hosting capacities of more than 5000 real feeders in Austria. The results show that the hosting capacity of 95% of the total feeders can be estimated with a mean error below 20% by only having knowledge of a random sample of 5%. Moreover, the hosting capacity estimation at a regional level shows a maximum error below 9%, also relying on a random sample of 5% of the total feeders. Furthermore, the approach proposed provides a methodology to assess new parameters aiming to improve the accuracy of the hosting capacity estimation at a feeder level.
The electricity demand due to the increasing number of EVs presents new challenges for the operation of the electricity network, especially for the distribution grids. The existing grid infrastructure may not be sufficient to meet the new demands imposed by the integration of EVs. Thus, EV charging may possibly lead to reliability and stability issues, especially during the peak demand periods. Demand side management (DSM) is a potential and promising approach for mitigation of the resulting impacts. In this work, we developed an autonomous DSM strategy for optimal charging of EVs to minimize the charging cost and we conducted a simulation study to evaluate the impacts to the grid operation. The proposed approach only requires a one way communicated incentive. Real profiles from an Austrian study on mobility behavior are used to simulate the usage of the EVs. Furthermore, real smart meter data are used to simulate the household base load profiles and a real low voltage grid topology is considered in the load flow simulation. Day-ahead electricity stock market prices are used as the incentive to drive the optimization. The results for the optimum charging strategy is determined and compared to uncontrolled EV charging. The results for the optimum charging strategy show a potential cost saving of about 30.8% compared to uncontrolled EV charging. Although autonomous DSM of EVs achieves a shift of load as pursued, distribution grid operation may be substantially affected by it. We show that in the case of real time price driven operation, voltage drops and elevated peak to average powers result from the coincident charging of vehicles during favourable time slots.
IBH Living Lab AAL
(2021)
In this paper, design of 1×8 multimode interference passive optical splitter is proposed. The structure of the splitter is designed based on a silicon nitride material platform. This work aims to find the minimum physical dimensions of the designed splitters with the satisfactory optical performance. According to the minimum insertion loss and minimum non-uniformity, the optimum length of the splitters is determined.
Femtosecond laser ablation on Si generates 2D ripple structures, known as laser induced periodic surface structures (LIPSS) and pinholes. We fabricated membranes with 20 to 50 μm thickness perforated by an array of tapered pinholes up to 5 μm in diameter and 10 to 20 μm spacing. Within several micrometer the pinholes transform into hollow photonic waveguides with constant diameter from 1μm to 2μm. Such structures offer a 3D photonic coupling device for polymer Y-branch- and MMI-splitter. We measured a considerable change of electrical resistivity for 500 ppm H2 in air using Si/SiO2/TiO2 substrates with 2D LIPSS. We propose to investigate 3D waveguide arrays also for photonic-chemical sensors.
In this paper we report on the experimental test set-up for the temperature characterization of fiber array to photonics chip butt coupling at 1310 nm and 1550 nm wavelengths. The alignment and gluing of fiber arrays to photonics chip were done by automated active alignments system and they were fixed themselves by UV curable epoxy adhesive. Temperature changes of coupling insertion losses are measured and investigated for two different UV adhesives during three temperature cycles from -40 °C to 80 °C in climatic chamber. Spectral dependence of insertion losses was measured and compared before and after three temperature cycles for 1530 nm to 1570 nm spectral range at room temperature.
We present design, simulation and optimization of polymer based 16-channel, 100-GHz AWG designed for central wavelength of 1550 nm. The input design parameters were calculated applying AWG-Parameters tool. The simulations were performed applying a commercial photonic tool PHASAR from Optiwave. The achieved transmission characteristics were evaluated by AWG-Analyzer tool and show a satisfying agreement between designed and simulated AWG optical properties. Finally, the influence of the number of phased array (PA) waveguides on the AWG performance was studied. The results show that there is a certain minimum number of PA waveguides necessary to reach sufficient AWG performance.
This paper presents the design, simulation, and optimization of a 1×128 multimode interference (MMI) splitter with a silica-on-silicon channel profile. This work aims to study the influence of the different S-Bend output waveguide shapes at the end of the MMI coupler on the final optical properties. The 1×128 MMI splitters have been simulated using beam propagation method in OptiBPM software. The optical properties of all considered splitters with different shapes of outputs waveguides are discussed and compared with each other. Based on the minimum insertion loss and non-uniformity, the final shape of output waveguides, ensuring the lowest losses, is determined.
Mit Eintritt in den ersten Covid-19-Lockdown im März 2020 und den darauffolgenden Semestern im überwiegenden Distance-Betrieb, wurde ein nie dagewesenes didaktisches Experiment gestartet. Eine seit 2017 abgehaltenen Lehrveranstaltung im Bachelorstudiengang Internationale Betriebswirtschaft an der Fachhochschule Vorarlberg simulierte bereits in "Vor-Pandemie-Semestern" das Arbeiten und Interagieren in virtuellen Teams. Die hieraus vorliegenden Reflexionsberichte ergeben zusammen mit den Hausarbeiten, welche die Studierenden der Lehrveranstaltung in 2020 im Lichte eines kompletten Online Semesters in virtuellen Teams erstellt haben die Basis für sieben Thesen zur Auswirkung einer digitalen und virtuellen Zusammenarbeit für Ausbildung und Berufstätigkeit.
Continuous monitoring of interactive exhibits in museums as part of a persuasive design approach
(2021)
With Cloud Computing and multi-core CPUs parallel computing resources are becoming more and more affordable and commonly available. Parallel programming should as well be easily accessible for everyone. Unfortunately, existing frameworks and systems are powerful but often very complex to use for anyone who lacks the knowledge about underlying concepts. This paper introduces a software framework and execution environment whose objective is to provide a system which should be easily usable for everyone who could benefit from parallel computing. Some real-world examples are presented with an explanation of all the steps that are necessary for computing in a parallel and distributed manner.
Oral applications of ultra-short laser pulses - a new approach for gentle and painless treatment?
(2006)
With the emergence of the recent Industry 4.0 movement, data integration is now also being driven along the production line, made possible primarily by the use of established concepts of intelligent supply chains, such as the digital avatars. Digital avatars – sometimes also called Digital Twins or more broadly Cyber-Physical Systems (CPS) – are already successfully used in holistic systems for intelligent transport ecosystems, similar to the use of Big Data and artificial intelligence technologies interwoven with modern production and supply chains. The goal of this paper is to describe how data from interwoven, autonomous and intelligent supply chains can be integrated into the diverse data ecosystems of the Industry 4.0, influenced by a multitude of data exchange formats and varied data schemas. In this paper, we describe how a framework for supporting SMEs was established in the Lake Constance region and describe a demonstrator sprung from the framework. The demonstrator project’s goal is to exhibit and compare two different approaches towards optimisation of manufacturing lines. The first approach is based upon static optimisation of production demand, i.e. exact or heuristic algorithms are used to plan and optimise the assignment of orders to individual machines. In the second scenario, we use real-time situational awareness – implemented as digital avatar – to assign local intelligence to jobs and raw materials in order to compare the results to the traditional planning methods of scenario one. The results are generated using event-discrete simulation and are compared to common (heuristic) job scheduling algorithms.
Complementarities and synergies of quadruple helix innovation design in smart city development
(2020)
Increased urbanization trends are stimulating regional needs to support transitions from urban environments to smart cities, using its holistic perspective as a source to innovation. Strong relations between smart cities, urban and regional development, are getting increased attention both at policy and implementation level, providing fertile ground for execution of the new European policy frameworks that supports quadruple helix approaches to innovation. Smart specialization strategies (RIS3) encompass such initiatives, placing ICT and collaboration between academia, industry, government, and citizen at the center of urban innovation. However, there is still lack of research on effects of such approaches to innovation, involving both quadruple helix clusters and ICT in utilizing innovation potentials for developing smart cities. This study aims to increase the understanding on how quadruple helix urban innovation strengthens competitiveness of regions by improving its local smart areas – RIS3. We identified smart specialization patterns and applied comparative benchmark between nine smallmedium sized urban regions in Central Europe. Building on these results, the study provides an overview of the effects of RIS3 strategies implemented through quadruple helix innovation clusters on competitiveness of regions and Smart City development.
A modified matrix adaptation evolution strategy with restarts for constrained real-world problems
(2020)
In combination with successful constraint handling techniques, a Matrix Adaptation Evolution Strategy (MA-ES) variant (the εMAg-ES) turned out to be a competitive algorithm on the constrained optimization problems proposed for the CEC 2018 competition on constrained single objective real-parameter optimization. A subsequent analysis points to additional potential in terms of robustness and solution quality. The consideration of a restart scheme and adjustments in the constraint handling techniques put this into effect and simplify the configuration. The resulting BP-εMAg-ES algorithm is applied to the constrained problems proposed for the IEEE CEC 2020 competition on Real-World Single-Objective Constrained optimization. The novel MA-ES variant realizes improvements over the original εMAg-ES in terms of feasibility and effectiveness on many of the real-world benchmarks. The BP-εMAg-ES realizes a feasibility rate of 100% on 44 out of 57 real-world problems and improves the best-known solution in 5 cases.
Investigations on mechanical stability of laser machined optical fibre tips for medical application
(2019)
Light delivery is a challenging task, when it comes to medical applications. The light is guided through optical fibers from the light source towards the treatment region. In case of interstitial light application, the light has to be decoupled from the fibre and spread to the surrounding tissue. To reach larger tissue volumes, this can be either obtained by adding a scattering volume to the tip of the fibre, or by directly modifying the optical fibre itself in order to break the total reflection within the fibre core. Such modifications can be either on the fibre surface itself or internally in the fibre core. One approach to obtain the fibre structuring could be laser induced surface roughening using an ultrafast laser source. While using volume scattering as diffusor at the fibre tip is currently the gold standard for non-thermal applications (< 0.3W/cm), the decoupling of high power laser intensities for thermal treatment options is still challenging. Structuring the fibre core itself usually is related with a loss of mechanical stability. As fibre breakage and potential loss within the human body can have serious consequences, the mechanical stability is one of the quality criterion in diffuser manufacturing. Therefore, investigations about the mechanical stability of laser manufactured optical fibre diffusers are needed.
In order to evaluate the mechanical stability, a 4-point as well as a 2-point breaking test were developed. Different fibre diffusers, based on volume or surface scattering, were manufactured using fs-laser ablation techniques and its breaking strengths were investigated.
It could be shown that for surface fibre modifications, the mechanical stability reduces with increasing defect depth. The stability significantly drops when the laser ablation was performed in the thermal energy range. Volume scattering modified fibres only showed a slight reduction in stability compared to un-machined fibres.
In conclusion, internal fibre modification seems to be the most promising method to establish optical fibre diffusers, which are capable of several watts of emission power, while preserving its mechanical strength.
In contrast to fossil energy sources, the supply by renewable energy sources likewind and photovoltaics can not be controlled. Therefore, flexibilities on the demandside of the electric power grid, like electro-chemical energy storage systems, are usedincreasingly to match electric supply and demand at all times. To control those flex-ibilities, we consider two algorithms that both lead to linear programming problems.These are solved autonomously on the demand side, i.e., by household computers.In the classic approach, an energy price signal is sent by the electric utility to thehouseholds, which, in turn, optimize the cost of consumption within their constraints.Instead of an energy price signal, we claim that an appropriate power signal that istracked in L1-norm as close as possible by the household has favorable character-istics. We argue that an interior point of the household’s feasibility region is neveran optimal price-based point but can result in a L1-norm optimal point. Thus, pricesignals can not parametrize the complete feasibility region which may not lead to anoptimal allocation of consumption.We compare the price and power tracking algorithms over a year on the base ofone-day optimizations regarding different information settings and using a large dataset of daily household load profiles. The computational task constitutes an embarrassingly parallel problem. To this end, the performance of the two parallel computation frameworks DEF [1] and Ray [2] are investigated. The Ray framework is used to run the Python applications locally on several cores. With the DEF frameworkwe execute our Python routines parallelly in a cloud. All in all, the results providean understanding of when which computation framework and autonomous algorithmwill outperform the other.
Ursprünglich wurde für das K-Projekt „LiTech“ eine mobile und intuitive Robotersteuerung – mit Touchbedienung und Augmented Reality – programmiert. Ziel war es, einen Industrieroboter spontan steuern zu können, mit besonderem Augenmerk auf Laienfreundlichkeit. Das System besteht aus einem Roboter und einem PC der als Bildschirm eine mit kapazitivem Touch ausgestattete und von einem Projektor bespielte Glasscheibe hat. Daten werden als String über eine serielle Schnittstelle übermittelt. Zur Erforschung der Nutzerfreundlichkeit werden Bälle auf einer Ebene hin- und herbewegt. Zur Cloud-Datenauswertung und Erstellung der Visualisierung wurden mittlerweile weitere Forschungszentren der FH Vorarlberg eingebunden. Im laufenden Wintersemester arbeitet ein Praktikant aus Südamerika an der Erweiterung auf den kompletten 3D-Raum mit möglicher Implementierung einer Gestensteuerung. Ziel des Beitrags ist es, den Versuchsaufbau und die Steuerung des Roboters zu beschreiben sowie geplante Weiterentwicklungen aufzuzeigen.
On the extension of digital ecosystems for SCM and customs with distributed ledger technologies
(2019)
Global supply chains represent the backbone of the modern manufacturing industry. Planning of global supply chains still represents a major hurdle, mainly because of the high complexity and unforeseen disruptions that have to be mastered for meeting the different logistics windows in a globally distributed production environment. Trust in supply chains is an additional challenge. A major – albeit sometimes overlooked - part of Supply Chain Management (SCM) is the management and integration of customs processes, clearing of tariffs, (re-)billing of customers, and fulfilling other legal requirements related to crossing borders, ranging from environmental standards over goods inspection to general paper work. With the exception of work offered by the World Customs Organization (WCO) the issue of customs and blockchain is still underrepresented in research and practice. In this paper, we look at innovations that drive the current ICTenabled SCM research and how these can be combined with smart customs management. After a literature review and introduction to the state-of-the-art, we list potential trust-based innovations for SCM and customs in digital business ecosystems. Based upon the innovations we also describe a requirements analysis of existing distributed ledger technologies (requirements for system layout, system configuration, system governance). A description of the prototype for the Lake Constance region – on which we are currently working – concludes the paper.
The photonic integrated circuits are required in the next generations of coherent terabit optical communications. The software tools for automated adjustment and coupling of optical fiber arrays to photonic integrated circuits has been developed. The obtained results are needed in final production phase in the technology process of photonic integrated circuits packaging.
We present design and simulation of 16-channel, 100-GHz silicon nitride based AWG using BeamPROP simulation engine of RSoft photonic tool. The AWG was designed for TM-polarized light with central wavelength of 850 nm. The input design parameters were calculated applying AWG-Parameters tool. For this purpose, we created a ridge waveguide structure, used in the design of the AWG layout, and performed FEM simulation. The output of the BPM simulation of AWG structure are the transmission characteristics, which was used to calculate transmission parameters defining optical properties of simulated AWG. The achieved simulation results are in a good agreement with the design.
Comparison of silicon nitride based 8-channel 100-GHz AWGs applying different waveguide structures
(2019)
This paper presents design and simulation of 8-channel, 100-GHz AWGs based on Si/SiO2/SiN/SiOx material platform. For the designs, two different waveguide structures were used, i.e. ridge and rib waveguides. AWGs were designed for central wavelength of 850 nm applying AWG-Parameters tool. The simulations were performed applying FEM and BPM methods in RSoft and PHASAR photonic tools. The simulation results show considerably lower losses but slightly higher channel crosstalk when applying rib waveguides.