Refine
Year of publication
Document Type
- Article (380)
- Conference Proceeding (373)
- Part of a Book (226)
- Book (104)
- Other (15)
- Report (14)
- Doctoral Thesis (12)
- Working Paper (7)
- Part of Periodical (4)
- Preprint (4)
Institute
- Wirtschaft (343)
- Forschungszentrum Mikrotechnik (226)
- Technik | Engineering & Technology (179)
- Department of Computer Science (Ende 2021 aufgelöst; Integration in die übergeordnete OE Technik) (152)
- Forschungszentrum Business Informatics (140)
- Soziales & Gesundheit (127)
- Forschungsgruppe Empirische Sozialwissenschaften (107)
- Forschungszentrum Human Centred Technologies (91)
- Didaktik (mit 31.03.2021 aufgelöst; Integration ins TELL Center) (68)
- Forschungszentrum Energie (66)
- Gestaltung (32)
- Josef Ressel Zentrum für Materialbearbeitung (28)
- Department of Engineering (Ende 2021 aufgelöst; Integration in die übergeordnete OE Technik) (26)
- Forschungszentrum Digital Factory Vorarlberg (12)
- Josef Ressel Zentrum für Robuste Entscheidungen (9)
- Forschung (8)
- Hochschulservices (4)
- Technik (2)
- Geschäftsführung (1)
- Josef Ressel Zentrum für Intelligente Thermische Energiesysteme (1)
- Learning Support (mit 31.03.2021 aufgelöst; Integration ins TELL Center) (1)
Has Fulltext
- no (1146) (remove)
Keywords
- Social Work (18)
- Organizational Studies, Economic Sociology (17)
- Social Structure, Social Inequality (17)
- arrayed waveguide gratings (11)
- Laser ablation (10)
- Soziale Arbeit (10)
- +KDC 122 (9)
- Design : Theorie, Reflexion (9)
- Y-branch splitter (8)
- photonics (8)
Das Konzept der entscheidungsgetriebenen Organisation basiert auf der Tatsache, dass jede Aktivität entlang der arbeitsteiligen Wertschöpfung in einer Organisation1 im Kern auf Entscheidungen beruht, die aneinander anknüpfen.2 Jede Aktivität kann man vollziehen oder unterlassen, beide Möglichkeiten sind zunächst gleichgewichtig. Jede argumentative Begründung für eine Aktivität ist dabei zugleich eine Begründung gegen alle anderen, ebenso möglichen Aktivitäten. Da dies für alle wertschöpfenden Aktivitäten in einer Organisation gilt, werden Entscheidungen von jeder an der arbeitsteiligen Leistungserstellung beteiligten Person getroffen.
Signatures of the optical stark effect on entangled photon pairs from resonantly-pumped quantum dots
(2023)
Two-photon resonant excitation of the biexciton-exciton cascade in a quantum dot generates highly polarization-entangled photon pairs in a near-deterministic way. However, the ultimate level of achievable entanglement is still debated. Here, we observe the impact of the laser-induced ac-Stark effect on the quantum dot emission spectra and on entanglement. For increasing pulse-duration-to-lifetime ratios and pump powers, decreasing values of concurrence are recorded. Nonetheless, additional contributions are still required to fully account for the observed below-unity concurrence.
Strain-induced dynamic control over the population of quantum emitters in two-dimensional materials
(2023)
The discovery of quantum emitters in two-dimensional materials has triggered a surge of research to assess their suitability for quantum photonics. While their microscopic origin is still the subject of intense studies, ordered arrays of quantum emitters are routinely fabricated using static strain-gradients, which are used to drive excitons toward localized regions of the 2D crystals where quantum-light-emission takes place. However, the possibility of using strain in a dynamic fashion to control the appearance of individual quantum emitters has never been explored so far. In this work, we tackle this challenge by introducing a novel hybrid semiconductor-piezoelectric device in which WSe2 monolayers are integrated onto piezoelectric pillars delivering both static and dynamic strains. Static strains are first used to induce the formation of quantum emitters, whose emission shows photon anti-bunching. Their excitonic population and emission energy are then reversibly controlled via the application of a voltage to the piezoelectric pillar. Numerical simulations combined with drift-diffusion equations show that these effects are due to a strain-induced modification of the confining-potential landscape, which in turn leads to a net redistribution of excitons among the different quantum emitters. Our work provides relevant insights into the role of strain in the formation of quantum emitters in 2D materials and suggests a method to switch them on and off on demand.
Synthetic polymers, such as polyamide (PA), inherently possess a moderate number of surface functionalities compared to natural polymers, which negatively impacts the uniformity of metallic coatings obtained through wet-chemical methods like electroless plating. The paper presents the use of a siloxane interlayer formed from the condensation of the hydrolyzed 3-triethoxysilylpropyl succinic anhydride (TESPSA) precursor as a strategy to modify the surface properties of polyamide 6.6 (PA66) fabrics and improve the uniformity of the copper surface coating. The application of the siloxane intermediate coating demonstrates a significant improvement in electrical conductivity, up to 20 times higher than fabrics without the interlayer. The morphology of the coatings was investigated using scanning electron (SEM) and laser confocal scanning microscopy (LSM). In addition, dye adsorption, flexural rigidity, air permeability and contact angle measurements were conducted to monitor the change in the PA66 properties after the siloxane functionalization.
Experimental multi-state quantum discrimination in the frequency domain with quantum dot light
(2022)
The quest for the realization of effective quantum state discrimination strategies is of great interest for quantum information technology, as well as for fundamental studies. Therefore, it is crucial to develop new and more efficient methods to implement discrimination protocols for quantum states. Among the others, single photon implementations are more advisable, because of their inherent security advantage in quantum communication scenarios. In this work, we present the experimental realization of a protocol employing a time-multiplexing strategy to optimally discriminate among eight non-orthogonal states, encoded in the four-dimensional Hilbert space spanning both the polarization degree of freedom and photon energy. The experiment, built on a custom-designed bulk optics analyser setup and single photons generated by a nearly deterministic solid-state source, represents a benchmarking example of minimum error discrimination with actual quantum states, requiring only linear optics and two photodetectors to be realized. Our work paves the way for more complex applications and delivers a novel approach towards high-dimensional quantum encoding and decoding operations.
A quantum-light source that delivers photons with a high brightness and a high degree of entanglement is fundamental for the development of efficient entanglement-based quantum-key distribution systems. Among all possible candidates, epitaxial quantum dots are currently emerging as one of the brightest sources of highly entangled photons. However, the optimization of both brightness and entanglement currently requires different technologies that are difficult to combine in a scalable manner. In this work, we overcome this challenge by developing a novel device consisting of a quantum dot embedded in a circular Bragg resonator, in turn, integrated onto a micromachined piezoelectric actuator. The resonator engineers the light-matter interaction to empower extraction efficiencies up to 0.69(4). Simultaneously, the actuator manipulates strain fields that tune the quantum dot for the generation of entangled photons with fidelities up to 0.96(1). This hybrid technology has the potential to overcome the limitations of the key rates that plague current approaches to entanglement-based quantum key distribution and entanglement-based quantum networks. Introduction
Beyond the Four-Level Model: Dark and Hot States in Quantum Dots Degrade Photonic Entanglement
(2023)
Entangled photon pairs are essential for a multitude of quantum photonic applications. To date, the best performing solid-state quantum emitters of entangled photons are semiconductor quantum dots operated around liquid-helium temperatures. To favor the widespread deployment of these sources, it is important to explore and understand their behavior at temperatures accessible with compact Stirling coolers. Here we study the polarization entanglement among photon pairs from the biexciton–exciton cascade in GaAs quantum dots at temperatures up to ∼65 K. We observe entanglement degradation accompanied by changes in decay dynamics, which we ascribe to thermal population and depopulation of hot and dark states in addition to the four levels relevant for photon pair generation. Detailed calculations considering the presence and characteristics of the additional states and phonon-assisted transitions support the interpretation. We expect these results to guide the optimization of quantum dots as sources of highly entangled photons at elevated temperatures.
In this paper, we consider the question of data aggregation using the practical example of emissions data for economic activities for the sustainability assessment of regional bank clients. Given the current scarcity of company-specific emission data, an approximation relies on using available public data. These data are reported in different standards in different sources. To determine a mapping between the different standards, an adaptation to the Covariance Matrix Self-Adaptation Evolution Strategy is proposed. The obtained results show that high-quality mappings are found. Nevertheless, our approach is transferable to other data compatibility problems. These can be found in the merging of emissions data for other countries, or in bridging the gap between completely different data sets.
HINTERGRUND: Gesundheitsförderungsforschung und ‐ausbildung sind zentrale Hebel für Kapazitätsentwicklung und Voraussetzungen für eine qualitätsgesicherte Gesundheitsförderungspraxis. Das Kompetenzzentrum Zukunft Gesundheitsförderung im Fonds Gesundes Österreich hat als eine Aufgabe, Capacity Building für Gesundheitsförderung (GF) in Österreich zu unterstützen und weiterzuentwickeln. Das Diskussionspapier widmet sich der Frage, welche Maßnahmen es braucht, um die Ausbildung und Forschung in Österreich weiterzuentwickeln und zu stärken. ***METHODE: Aufbauend auf der Fallstudie zu Forschungsaktivitäten an (Privat‐)Universitäten, FHs, außeruniversitären Forschungseinrichtungen sowie Aktivitäten im Bereich Ausbildung zu einzelnen tertiären Studienangeboten mit explizitem GF‐Bezug (Plunger/Wahl 2023; Wahl/Plunger 2023) wurden mit Expertinnen und Experten aus den Bereichen Ausbildung, Forschung und Praxis im Rahmen von drei Workshops und zwei schriftlichen Feedbackschleifen Entwicklungsperspektiven zur Gesundheitsförderungsausbildung und ‐forschung entwickelt. ***ERGEBNISSE: Im Diskussionspapier wurden für die Bereiche Ausbildung und Forschung jeweils drei zentrale Entwicklungsperspektiven benannt und hinsichtlich eines Zielbilds, des Nutzens und der Realisierungsmöglichkeiten beschrieben: Im Bereich Ausbildung sind das die Stärkung der Vernetzung der Ausbildungs‐, Forschungs‐ und Praxiseinrichtungen, die Entwicklung und Etablierung von Kernkompetenzen in der Gesundheitsförderung und die (Weiter‐)Entwicklung spezialisierter Ausbildungsangebote und Lehrformate für Gesundheitsförderung. Für den Bereich Forschung sind das die Stärkung langfristiger finanzieller Ressourcen, die Stärkung von Strukturen für die Verbindung von Forschung, Policy und Praxis sowie die Stärkung von (Nachwuchs‐)Wissenschaftlerinnen, (Nachwuchs‐)Wissenschaftlern und des Forschungsumfelds für Gesundheitsförderungsforschung. Die einzelnen Perspektiven sind zum Teil eng miteinander verbunden und können einander stärken. Übergreifend braucht es sowohl für die Ausbildung als auch für die Forschung Advocacy‐Arbeit und Sensibilisierungsarbeit unter Expertinnen, Experten, Entscheidungsträgerinnen und ‐trägern sowie ausreichend finanzielle Ressourcen und Rahmenbedingungen, die die beschriebenen Entwicklungen ermöglichen. Die konkreten Inhalte der Entwicklungsperspektiven sollen in Zukunft unter Einbindung aller relevanten (inter‐)nationalen Akteurinnen und Akteure gestaltet werden.
This study presents different approaches to increase the sensing area of NiO based semiconducting metal oxide gas sensors. Micro- and nanopatterned laser induced periodic surface structures (LIPSS) are generated on silicon and Si/SiO2 substrates. The surface morphologies of the fabricated samples are examined by FE SEM. We select the silicon samples with an intermediate Si3N4 layer due to its superior isolation quality over the thermal oxide for evaluating the hydrogen and acetone sensitivity of a NiO based test sensor.
Objectives: The MetabQoL 1.0 is the first disease-specific health related quality of life (HrQoL) questionnaire for patients with intoxication-type inherited metabolic disorders. Our aim was to assess the validity and reliability of the MetabQoL 1.0, and to investigate neuropsychiatric burden in our patient population. Methods: Data from 29 patients followed at a single center, aged between 8 and 18 years with the diagnosis of methylmalonic acidemia (MMA), propionic acidemia (PA) or isovaleric acidemia (IVA), and their parents were included. The Pediatric Quality of Life Inventory (PedsQoL) was used to evaluate the validity and reliability of MetabQoL 1.0.
Results: The MetabQoL 1.0 was shown to be valid and reliable (Cronbach's alpha: 0.64–0.9). Fourteen out of the 22 patients (63.6%) formally evaluated had neurological findings. Of note, 17 out of 20 patients (85%) had a psychiatric disorder when evaluated formally by a child and adolescent psychiatrist. The median mental scores of the MetabQoL 1.0 proxy report were significantly higher than those of the self report (p = 0.023). Patients with neonatal-onset disease had higher MetabQoL 1.0 proxy physical (p = 0.008), mental (p = 0.042), total scores (p = 0.022); and self report social (p = 0.007) and total scores (p = 0.043) than those with later onset disease.
Conclusions: This study continues to prove that the MetabQoL 1.0 is an effective tool to measure what matters in intoxication-type inherited metabolic disorders. Our results highlight the importance of clinical assessment complemented by patient reported outcomes which further expands the evaluation toolbox of inherited metabolic diseases.
In Bewegung kommen
(2023)
Armut im Blick?
(2023)
Whether at the intramolecular or cellular scale in organisms, cell-cell adhesion adapt to external mechanical cues arising from the static environment of cells and from dynamic interactions between neighboring cells. Cell-cell adhesions need to resist detachment forces to secure the integrity and internal organization of organisms. In the past, various techniques have been developed to characterize adhesion properties of molecules and cells in vitro, and to understand how cells sense and probe their environment. Atomic force microscopy and dual-pipette aspiration, where cells are mainly present in suspension, are common methods for studying detachment forces of cell-cell adhesions. How cell-cell adhesion forces are developed for adherent and environment-adapted cells, however, is less clear. Here, we designed the Cell-Cell Separation Device (CC-SD), a microstructured substrate that measures both intercellular forces and external stresses of cells towards the matrix. The design is based on micropillar arrays originally designed for cell traction-force measurements. We designed PDMS micropillar-blocks, to which cells could adhere and be able to connect to each other across the gap. Controlled stretching of the whole substrate changed the distance between blocks and increased gap size. That allowed us to apply strains to cell-cell contacts, eventually leading to cell-cell adhesion detachment, which was measured by pillar deflections. The CC-SD provided an increase of the gap between the blocks of up to 2.4-fold, which was sufficient to separate substrate-attached cells with fully developed F-actin network. Simultaneously measured pillar deflections allowed us to address cellular response to the intercellular strain applied. The CC-SD thus opens up possibilities for the analysis of intercellular force detachments and sheds light on the robustness of cell-cell adhesions in dynamic processes in tissue development.
Why do some countries assign a major role to wind energy in decarbonizing their electricity systems, while others are much less committed to this technology? We argue that processes of (de-)legitimation, driven by discourse coalitions who strategically employ certain storylines in public debates, provide part of the answer. To illustrate our approach, we comparatively investigate public discourses surrounding wind energy in Austria and Switzerland, two countries that differ strongly in wind energy deployment. By combining a qualitative content analysis and a discourse network analysis of 808 newspaper articles published 2010–2020, we identify four distinct sets of storylines used to either delegitimize or legitimize the technology. Our study indicates that low deployment rates in Switzerland can be related to the prominence of delegitimizing storylines in the public discourse, which result in a rather low socio-political acceptance of wind energy. In Austria, by contrast, there is more consistent support for wind energy by discourse coalitions using a broad set of legitimizing storylines. By bridging the related but separate literatures of technology legitimacy and social acceptance, our study contributes to a better understanding of socio-political conflict and divergence in low-carbon technological pathways.
A step change is needed in the deployment of renewable energy if the triple challenge of ensuring climate change mitigation, energy security, and energy affordability is to be met. Yet, social acceptance of infrastructure projects and policies remains a key concern. While there has been decades of fruitful research on the social acceptance of wind energy and other renewables, much of the extant research is cross-sectional in nature, failing to capture the important dynamic processes that can make or break renewable energy projects. This paper introduces a Special Issue of Energy Policy which focuses on the neglected topic of the dynamics of social acceptance of renewable energy, drawing on contributions made at an international research conference held in St. Gallen (Switzerland) in June 2022. In addition to introducing these papers and drawing out common themes, we also seek to offer some conceptual clarity on the issue of dynamics in social acceptance, taking into account the influence of time, power, and scale in shaping decision-making processes. We conclude by highlighting a number of avenues of potential future research.
Parametric anti-resonance is a phenomenon that occurs in systems with at least two degrees of freedom; this can be achieved by periodically exciting some parameters of the system. The effect of this properly tuned periodicity is to increase the dissipation in the system, which leads to a raising in the effective damping of vibrations. This contribution presents the design of an open-loop control to reduce the settling time using the anti-resonance concept. The control signal consists of a quasi-periodic signal capable of transferring the system’s oscillations from one mode to another mode of the system. The general averaging technique is used to characterize the dynamics, particularly the so-called slow dynamics of motion. With this analysis, the control signal is designed for the potential application of a microelectromechanical sensor arrangement; for this specific example, up to 96.8% reduction of settling time is achieved.
In this work, parametric excitation is introduced in a fully balanced flexible rotor mounted on two identical active gas foil bearings. The active gas foil bearings change the top foil shape harmonically with a specific amplitude and frequency. The deformable foil shape is approximated by an analytical function, while the gas pressure distribution is evaluated by the numerical solution of the Reynolds equation for compressible flow. The harmonic variation of the foil shape generates a respective variation in the bearings’ stiffness and damping properties and the system experiences parametric resonances and antiresonances in specific excitation frequencies. The nonlinear gas bearing forces generate bifurcations in the solutions of the system at certain rotating speeds and excitation frequencies; period doubling and Neimark-Sacker bifurcations are noticed in the examined system, and their progress is evaluated as the two bifurcation parameters (rotating speed and parametric excitation frequency) are changed, though a codimension-2 numerical continuation of limit cycles. It is found that at specific range of excitation frequency there are parametric anti-resonances and the bifurcations collide and vanish. Therefore, a bifurcation-free operating range is established and the system can operate stable at a wide speed range.
Il presente capitolo è incentrato su uno dei nuovi paradigmi di produzione e consumo, l’economia circolare – i.e., “un’economia in cui gli scarti e l’inquinamento sono minimizzati grazie al design consapevole di prodotti, processi e servizi, il valore delle risorse è mantenuto il più a lungo possibile e i sistemi naturali vengono rigenerati” (Gusmerotti et al., 2020, p. 9). L’elaborato si focalizza in particolare su uno dei modelli di business considerati “circolari” (CBM) (Linder e Williander, 2017), il product-as-a-service (PaaS da qui in poi) (Lacy et al., 2016). Alla base di questo modello di business vi è l’idea che i clienti non acquisiscono la proprietà dei beni, bensì li utilizzano al pari dei servizi, a fronte di un pagamento, come riporta la letteratura concernente i product-service systems (PSS) (Lacy et al., 2016; Mont, 2002; Tukker e Tischner, 2006; Tukker, 2015). Questo approccio al consumo rientra nel più complesso fenomeno della servitizzazione, la quale comporta “l’innovazione nelle capacità e nei processi di un’impresa, in modo che essa possa meglio creare valore – per il cliente e l’impresa stessa – passando dalla vendita di prodotti alla vendita di sistemi di prodotto-servizio” (Neely, 2009, p. 10).
Digitalization is changing business models and operational processes. At the same time, improved data availability and powerful analytical methods are influencing controlling and increasingly require the use of statistical and information technology skills and knowledge. Using a case study from marketing controlling, the article shows the use of business analytics methods and addresses the tasks of controlling in the digital age.
Statistische Methodenkompetenz wird im Controlling zunehmend bedeutender, so ist die evidenzbasierte Prognose durch algorithmische Analyse von Datenbeständen ein Schwerpunkt von Controlling Analytics. Die Fallstudie durchleuchtet daher anhand von Datenmaterial des Schweizer Bundesamts für Statistik das Vorgehen bei einer Datenanalyse, insbesondere beim Einsatz der Zeitregression für Prognosezwecke, und geht dabei auf methodische Besonderheiten, Caveats und Einsatzmöglichkeiten in Microsoft Excel ein. Die Fallbeschreibung und Aufgaben sind im WiSt-Heft Nr. 4/23 zu finden.
Controlling Analytics: Einsatz für Prognosen im Controlling - Teil 1: Fallbeschreibung und Aufgaben
(2023)
Statistische Methodenkompetenz wird im Controlling zunehmend bedeutender, so ist die evidenzbasierte Prognose durch algorithmische Analyse von Datenbeständen ein Schwerpunkt von Controlling Analytics. Die Fallstudie durchleuchtet daher anhand von Datenmaterial des Schweizer Bundesamts für Statistik das Vorgehen bei einer Datenanalyse, insbesondere beim Einsatz der Zeitregression für Prognosezwecke, und geht dabei auf methodische Besonderheiten, Caveats und Einsatzmöglichkeiten in Microsoft Excel ein.
By a simple femtosecond laser process, we fabricated metal-oxide/gold composite films for electrical and optical gas sensors. We designed a dripple wavelength AWG-spectrometer, matched to the plasma absorption wavelength region of the composite films. H2/CO absorptions fit well with the AWG design for multi gas detection sensor arrays
Purpose – The purpose of this study is to explore the exogenous and endogenous drivers of the high-growth of Unicorn start-ups along their life cycle, with a particular focus on Unicorns in the fintech industry.
Design/methodology/approach – The study employs an explorative longitudinal analysis with a matched pair of two cases of Unicorns start-ups with similar antecedent features to understand holistically drivers over the longer term.
Findings – High-growth patterns over the longer term are the result of a combined industry- and company-life cycle perspective. Drivers and growth patterns vary significantly according to the time of entry in the industry and
its development status. The findings are systematised within a set of propositions to be tested in future research.
Research limitations/implications – The limitations lie in empirical evidence, as the analysis is limited to one matched-pair. The revealed Unicorns’ drivers for long-term growth might encourage future research to further investigate these drivers on a larger scale.
Practical implications – The study offers practical recommendations for start-ups with high-growth ambitions and advice to policy makers regarding the development of tailor-made support programs.
Originality/value – The study significantly extends extant work on growth and high-growth by examining endogenous and exogenous triggers over time and by linking the Unicorn-life cycle to the industry life cycle, an approach which has, to the best of the authors’ knowledge, not yet been applied.
International Entrepreneurship explains the opportunities and challenges facing internationalizing entrepreneurial ventures. The book inlcudes a thorough discussion of fundamentals as well as contemporary research findings. Numerous cases, featuring diverse contexts, illustrate theory and help classroom use.
The main aims of this work are the validation of the developed process of gluing a single-mode optical fiber array with a photonic chip and the selection of a more suitable adhesive from the two adhesives being compared. An active alignment system was used for adjusting the two optical fiber arrays to a photonics chip. The gluing was done by two compared UV curable adhesives applied in the optical path. The insertion losses of glued coupling were measured and investigated at two discrete wavelengths 1310 nm and 1550 nm during temperature testing in the climatic chamber according to Telcordia GR_1209_Corei04 [3]. The measurement, investigation, and comparison of insertion losses of the glued coupling at the spectral band from 1530 nm to 1570 nm were done immediately after gluing process and after three temperature cycles in the climatic chamber with one month delay.
In 2021, a prominent Austria dairy producer suffered from an IT attack and was completely paralysed. Without clearly defined mitigation measures in place, major disruptions were caused alongside the whole supply chain, including logistics service providers, governmental food safety bodies, as well as retailers (i.e., supermarkets and convenience stores). In this paper, we ask the question how digitisation and digital transformation impact IT security, especially when considering the complex company ecosystems of food production and food supply chains in Austria. The problem statement stems from a gap in knowledge of key differences in approaches towards IT security, resilience, risk management and especially business interfaces between food suppliers, supermarkets, distributors, logistics and other service providers. In order to answer related research questions, firstly, the authors conduct literature research, and highlight common guidelines and standardisation as well as look at state-based recommendations for critical infrastructure. In a second step, the paper describes a quantitative and qualitative survey with Austrian food companies (producers and retailers) which is described in detail in the paper. A description of recommended measures for the industry, further steps, as well as an outlook conclude the paper.
Background: Cardiovascular disease is the major cause of death worldwide. Although knowledge regarding diagnosing and treating cardiovascular disease has increased dramatically, secondary prevention remains insufficiently implemented due to failure among affected individuals to adhere to guideline recommendations. This has continued to lead to high morbidity and mortality rates. Involving patients in their healthcare and facilitating their active roles in their chronic disease management is an opportunity to meet the needs of the increasing number of cardio-vascular patients. However, simple recall of advice regarding a more preventive lifestyle does not affect sustainable behavioral lifestyle changes. We investigate the effect of plaque visualization combined with low-threshold daily lifestyle tasks using the smartphone app PreventiPlaque to evaluate change in cardiovascular risk profile. Methods: and study design: This randomized, controlled clinical trial includes 240 participants with ultrasound evidence of atherosclerotic plaque in one or both carotid arteries, defined as focal thickening of the vessel wall measuring 50% more than the regular vessel wall. A criterion for participation is access to a smartphone suitable for app usage. The participants are randomly assigned to an intervention or a control group. While both groups receive the standard of care, the intervention group has additional access to the PreventiPlaque app during the 12-month follow-up. The app includes daily tasks that promote a healthier lifestyle in the areas of smoking cessation, medication adherence, physical activity, and diet. The impact of plaque visualization and app use on the change in cardiovascular risk profile is assessed by SCORE2. Feasibility and effectiveness of the PreventiPlaque app are evaluated using standardized and validated measures for patient feedback.
Im vorliegenden Paper wird ein Vergleich zwischen Produktions-und Simulationsdaten präsentiert welches im Rahmen einer größeren Initiative zur Verwendung von Shopfloor Daten bei einem Projektpartner in der Automobilindustrie umgesetzt wurde. In diesem Projekt wurden die Daten die während der Füllbildsimulation entstehen mit den Daten aus der finalen Werkzeugabnahme verglichen um zu analysieren, wie genau diese miteinander über einstimmen. Je besser die Simulation ist, desto schneller kann der gesamte Werkzeugentwicklungsprozess abgewickelt werden, welcher als Kernprozess massives Einsparungspotenzial und damit Wettbewerbsvorteil mit sich bringt.
The usage of data gathered for Industry 4.0 and smart factory scenarios continues to be a problem for companies of all sizes. This is often the case because they aim to start with complicated and time-intensive Machine Learning scenarios. This work evaluates the Process Capability Analysis (PCA) as a pragmatic, easy and quick way of leveraging the gathered machine data from the production process. The area of application considered is injection molding. After describing all the required domain knowledge, the paper presents an approach for a continuous analysis of all parts produced. Applying PCA results in multiple key performance indicators that allow for fast and comprehensible process monitoring. The corresponding visualizations provide the quality department with a tool to efficiently choose where and when quality checks need to be performed. The presented case study indicates the benefit of analyzing whole process data instead of considering only selected production samples. The use of machine data enables additional insights to be drawn about process stability and the associated product quality.
Tap or swipe
(2023)
Demand-side management approaches that exploit the temporal flexibility of electric vehicles have attracted much attention in recent years due to the increasing market penetration. These demand-side management measures contribute to alleviating the burden on the power system, especially in distribution grids where bottlenecks are more prevalent. Electric vehicles can be defined as an attractive asset for distribution system operators, which have the potential to provide grid services if properly managed. In this thesis, first, a systematic investigation is conducted for two typically employed demand-side management methods reported in the literature: A voltage droop control-based approach and a market-driven approach. Then a control scheme of decentralized autonomous demand side management for electric vehicle charging scheduling which relies on a unidirectionally communicated grid-induced signal is proposed. In all the topics considered, the implications on the distribution grid operation are evaluated using a set of time series load flow simulations performed for representative Austrian distribution grids. Droop control mechanisms are discussed for electric vehicle charging control which requires no communication. The method provides an economically viable solution at all penetrations if electric vehicles charge at low nominal power rates. However, with the current market trends in residential charging equipment especially in the European context where most of the charging equipment is designed for 11 kW charging, the technical feasibility of the method, in the long run, is debatable. As electricity demand strongly correlates with energy prices, a linear optimization algorithm is proposed to minimize charging costs, which uses next-day market prices as the grid-induced incentive function under the assumption of perfect user predictions. The constraints on the state of charge guarantee the energy required for driving is delivered without failure. An average energy cost saving of 30% is realized at all penetrations. Nevertheless, the avalanche effect due to simultaneous charging during low price periods introduces new power peaks exceeding those of uncontrolled charging. This obstructs the grid-friendly integration of electric vehicles.
Das Kreisgespräch
(2023)
In the era of digital transformation an evolution takes place. Following this, new perspectives concerning leadership are required, especially in virtual teams. Shared Leadership is a promising leadership form to meet the challenges in a virtual team setting. Particularly, studies show that shared leadership increases performance, team creativity and innovative behavior. Moreover, the responsibility is distributed among several, not one individual. Nevertheless, it is unclear, which skills are needed in shared leadership teams and how they could be trained. Therefore, we develop a conceptual framework to pave the way for an empirical inquiry of the skills for and the role of shared leadership. Moreover, we encourage the discussion, whether the current leadership development is still viable and offer practical implications to develop shared leadership.
Der Schlüssel zur Zukunft
(2023)
Der vorliegende Beitrag stellt das Konzept eines Flipped Classroom-Ansatzes für die Lehrveranstaltung „Grundlagen der Wirtschaft und finanziellen Unternehmensführung“ im Masterstudiengang Wirtschaftsinformatik der Fachhochschule Vorarlberg vor. Es werden die Rahmenbedingungen der Lehrveranstaltung erläutert und die didaktischen Überlegungen sowie Zielsetzungen diskutiert. Besonderes Augenmerk wird auf die Vorteile des Blended Learning sowie die Bedeutung von Feedback gelegt. Anschließend werden die Inhalte, der Aufbau sowie die verwendeten Materialien und Tools beschrieben. Es wird gesondert auf den Feedbackprozess eingegangen. Abschließend erfolgt eine Bewertung des Lehrveranstaltungskonzepts anhand der Dimensionen technischer Ablauf, Engagement der Studierenden, Klausurerfolg und Lehrveranstaltungsevaluation. Auf dieser Basis werden mögliche Verbesserungen für die Zukunft abgeleitet. Insgesamt wird deutlich, dass der Flipped Classroom-Ansatz eine effektive Methode ist, die mit Standardtools umgesetzt werden kann und die den Lernerfolg und die Zufriedenheit der Studierenden fördert.
The thorny issue of time
(2023)
Formen des Dialogs
(2023)
Digital twin as enabler of business model innovation for infrastructure construction projects
(2023)
Emerging technologies and methods are becoming an important element of the construction industry. Digital Twins are used as a base to store data in BIM models and make use out of the data respectively make the data visible. The transparency in all phases of the lifecycle of building and infrastructure assets is crucial in order to get a more efficient lifecycle of planning, construction and maintenance. Whereas other industries increased performance in these phases by making use out of the data, construction industry is stuck in traditional methods and business models. In this paper we propose a concept that focuses on the digital production twin. The comparison of planning data with As-Is production data can empower a data driven continuous improvement process and support the decision making process of future innovations and suitable business models. This paper outlines the possibility to use the data stored in a digital twin with regards to the evaluation of possible business models.
Through mandatory ESG (environmental, social, governance) reporting large companies must disclose their ESG activities showing how sustainability risks are incorporated in their decision-making and production processes. This disclosure obligation, however, does not apply to small and medium-sized enterprises (SME), creating a gap in the ESG dataset. Banks are therefore required to collect sustainability data of their SME customers independently to ensure complete ESG integration in the risk analysis process for loans. In this paper, we examine ESG risk analysis through a smart science approach laying the focus on possible value outcomes of sustainable smart services for banks as well as for their (SME) customers. The paper describes ESG factors, how services can be derived from them, targeted metrics of ESG and an ESG Service Creation Framework (business ecosystem building, process model, and value creation). The description of an exemplary use case highlighting the necessary ecosystem for service creation as well as the created value concludes the paper.
The role of entrepreneurs and intrapreneurs in the current zeitgeist is to drive innovation, re-shape rigid, established processes in business as well as for consumers. They use new viewpoints to pioneer new (business) models which focus on ‘smartness’ rather than the purely monetary and short-sighted models of yesteryear. Fostering and supporting the culture of this current zeitgeist is a mayor challenge for entre- and intrapreneurial support infrastructures, namely startup centres and innovation hubs of universities and other public institutions as well as innovation centres of private companies. Hereby, support may range from access to funding over provision of resources such as offices or computing hardware to coaching in the development of business ideas and strategic roadmaps for product and service deployment. In this paper, we focus on describing the status-quo of afore- mentioned support infrastructures in Vorarlberg and the Lake Constance region, then extend the scope to existing (international) approaches for aiding founders and inno- vators in the development of smart services. An analysis of success stories of the Vorarlberg startup centre ‘startupstube’ and other initiatives including their compar- ison to international counterparts builds the basis for a methodological framework for (service science) coaching in entre- and intrapreneurial support infrastructures. The paper is concluded by the description of a framework for choosing the right methods and tools to create service value in entre-/intrapreneurship based upon tested, proven know-how and for defining support infrastructure needs based upon pre-defined stakeholder and target groups as well as the (industry) sectors of the innovators.
In this paper, a 256-channel, 10-GHz arrayed waveguide gratings demultiplexer for ultra-dense wavelength division multiplexing was designed using an in-house developed tool called AWG-Parameters. The AWG demultiplexer was designed for a central wavelength of 1550 nm and the structure was simulated in PHASAR tool from Optiwave. Two different AWG designs were developed and the influence of the design parameters on the AWG performance was studied.
Design, simulation, and optimization of the 1×4 optical three-dimensional multimode interference splitter using IP-Dip polymer as a core and polydimethylsiloxane (PDMS) Sylgard 184 as a cladding is demonstrated. The splitter was simulated by using beam propagation method in BeamPROP simulation module of RSoft photonic tool and optimized for an operating wavelength of 1.55 μm . According to the minimum insertion loss, the dimensions of the splitter were optimized for a waveguide with a core size of 4×4 μm2 . The objective of the study is to create the design for fabrication by three-dimensional direct laser writing optical lithography.
Schreiblehre und KI – Teil 3: Erste Schlussfolgerungen aus dieser Erfahrung für die Schreiblehre
(2023)
Der Unternehmensbewertung kommt seit jeher ein hoher Stellenwert unter den Disziplinen der Betriebswirtschaftslehre zu. Obwohl die Unternehmensbewertung als gut erforschtes Fachgebiet bezeichnet werden kann, gibt es durchaus noch Teilbereiche, denen bisher noch keine ausreichende Beachtung geschenkt worden ist. Hierzu zählt insbesondere die Fragestellung, inwiefern Steuern Einfluss auf das Wertwachstum bei der Bewertung ausüben. Die vorliegende Arbeit versucht diesen Bereich durch eine umfassende Analyse näher zu beleuchten. Dabei werden zunächst die wichtigsten Grundlagen von Unternehmensbewertung, Wachstum und Steuern dargelegt. Die erlangten Erkenntnisse werden anschließend in einem Bewertungsmodell zusammengeführt und interpretiert. Es erfolgt dabei stets eine Gegenüberstellung der steuerlichen Rahmenbedingungen vor und nach der Unternehmenssteuerreform 2008. Um nicht nur den Bedürfnissen der Wissenschaft, sondern ebenfalls denen der Praxis gerecht zu werden, werden die Grundsätze zur Durchführung von Unternehmensbewertungen des Instituts der Wirtschaftsprüfer (IDW S 1) kritisch in die Analyse mit einbezogen.
In den letzten Jahren lässt sich insbesondere in den Industrienationen ein wachsendes Interesse für Umweltfragen feststellen. In der betriebswirtschaftlichen Praxis äußert sich dies in der Initiierung verschiedener unternehmerischer Umweltinitiativen, über die regelmäßig in der einschlägigen Wirtschaftspresse zu lesen ist. Zugleich findet sich im Bereich der Wirtschaftswissenschaften ein breiter Literaturkörper, der die Auswirkungen einer verstärkten unternehmerischen Umweltorientierung auf den finanzwirtschaftlichen Erfolg kontrovers diskutiert. So existieren unterschiedlichste Theorien, die von einem positiven oder aber negativen Zusammenhang ausgehen. Empirische Untersuchungen zu dieser Fragestellung sind für Deutschland hingegen kaum auffindbar. Die Studie nimmt sich dieser Lücke an. Dabei werden zu Beginn wesentliche Begrifflichkeiten und Konzepte erläutert. Zudem erfolgt eine ausführliche Diskussion des aktuellen theoretischen Forschungsstands über mögliche Zusammenhänge von unternehmerischer Umweltleistung und finanzwirtschaftlichem Erfolg. Dem werden bisherige empirische Erkenntnisse gegenübergestellt. Den Kern der Untersuchung bilden zwei empirische Analysen am deutschen (Kapital-)Markt. Zunächst wird im Rahmen einer Ereignisstudie für den Zeitraum von 1993 bis 2008 untersucht, inwiefern sich Unternehmenswertänderungen am Aktienmarkt nach der Verleihung von Umweltpreisen feststellen lassen. Innerhalb der zweiten Analyse wird anhand von Querschnittsdaten der Jahre 2006 bis 2008 überprüft, ob ein Zusammenhang zwischen bilanziellen bzw. kapitalmarktbasierten Kennzahlen und sogenannten Umweltratings besteht. Besonderer Wert wird bei beiden Untersuchungen auf die Robustheit der Ergebnisse gelegt, weshalb u. a. der robuste MM-Schätzer sowie Bootstrap-Testverfahren Verwendung finden. Das Buch trägt dazu bei, eine häufig polemisch geführte Diskussion auf eine wissenschaftlich fundierte Basis zu stellen. Anleger erhalten zudem Anhaltspunkte, ob eine Investition in verhältnismäßig "grüne" Unternehmen mit finanziellen Nachteilen verbunden sein muss.
Hot water heat pumps are well suited for demand side management, as the heat pump market faced a rapid growth in the past years with the trend to decentralized domestic hot water use. Sales were accelerated through wants and needs of energy conservation, energy efficiency, and less restrictive rules regarding Legionella. While in literature the model predictive control potential for heat pumps is commonly shown in simulations, the share of experimental studies is relatively low. To this day, experimental studies considering solely domestic hot water use are not available. In this paper, the realistic achievable model predictive control potential of a hot water heat pump is compared to the standard hysteresis control, to provide an experimental proof. We show for the first time, how state-of-the-art approaches (model predictive control, system identification, live state estimation, and demand prediction) can be transferred from electric hot water heaters to hot water heat pumps, combined, and implemented into a real-world hot water heat pump setup. The optimization approach, embedded in a realistic experimental setting, leads to a decrease in electric energy demand and cost per unit electricity by approximately 12% and 14%, respectively. Further, an increase in efficiency by approximately 13% has been achieved.
This paper presents design, simulation, and optimization of the three-dimensional 1×4 optical multimode interference splitter using IP-Dip polymer as a core and polydimethylsiloxane (PDMS) Sylgard 184 as a cladding. The splitter was simulated by using beam propagation method in BeamPROP simulation engine of RSoft photonic tool and optimized for an operating wavelength of 1.55 µm. According to the minimum insertion loss, the dimensions of the MMI coupler and the length of the whole MMI splitter structure were optimized applying a waveguide with a core size of 4×4 µm2. The objective of the study is to create a design for fabrication by three-dimensional direct laser writing optical lithography.
We present design of planar 16-channel, 100-GHz multi-mode polymer-based AWG. This AWG was designed for central wavelength of 1550 nm applying AWG-Parameters tool. The AWG structure was created and simulated in the commercial photonic tool PHASAR from Optiwave. Achieved transmission characteristics were evaluated by AWG-Analyzer tool. For the design, multi-mode waveguides having a cross-section of (4x4) µm2 were used. The simulated results show strong worsening of the transmission characteristics in comparison when using single-mode waveguides. Nevertheless, the transmitting channels are clearly separated. The reason for using thicker multi-mode waveguides in the design is possibility to fabricate the AWG structure on polymer basis using direct laser writing lithography.
Coupling is one of the most frequently mentioned metric in software systems. However, to measure logical coupling between microservices, runtime information is needed or the availability of service-log files to analyze the calls between services is required. This work presents our emerging results, in which we propose a metric to statically calculate logical coupling between microservices based on commits to versioning systems. We performed an initial validation of the proposed metric with a dataset containing 145 open-source microservices projects. The results illustrate how logical coupling affects every system and increases overtime. However, we did not find a correlation between the number of commits or the number of developers and the introduction of logical coupling. In future, we investigate why, how, and when logical coupling is introduced in a system.
Die persönliche Black-Box
(2023)
Redundanz und Varietät
(2023)
The paper deals with designing and numerical modelling a 2 x 2 optical switch for photonic integrated circuits based on 2 x 2 MMI elements and phase modulators. The 2 x 2 optical switch was modelled in the RsoftCAD with the simulation tool BeamPROP. The 2 x 2 optical switch is a common element for creating more complex 1 x N or N x N optical switches in all-optical signal processing.
In this paper, the design of three-dimensional configuration of Y-branch splitter is compared with Multimode Interference splitter. Both splitters use the IP-Dip polymer as a standard material for 3D laser lithography. The optical properties of the splitters for both approaches are discussed and compared.
In this work, we investigated the influence of different etch depths of the rib waveguides on the performance of SiN-based AWGs. For this purpose, an 8-channel 100 GHz AWG was designed for a center wavelength of 850 nm. The design parameters entered were calculated using the AWG-Parameters tool. The simulations were performed with a commercial photonic tool PHASAR from Optiwave. The simulated performance was evaluated using the AWG-Analyzer tool. For the AWG design, we used three identical rib waveguides with different etch depths to simulate possible etch imperfection. The simulations show the wavelength shift and degradation of the AWG performance.
Optoelectronic system based on photonic integrated circuits to miniaturize spectral domain OCT
(2023)
We present a miniaturized optical coherence tomography (OCT) setup based on photonic integrated circuits (PIC) for the 850 nm range. We designed a 512-channel arrayed waveguide grating (AWG) on a PIC for spectral domain OCT (SD-OCT) that is co-integrated with PIN-photodiodes and analog-to-digital-converters on one single chip. This image sensor is combined with all the necessary electronics to act as a camera. It is integrated into a fiber-based OCT system, achieving a sensitivity of >80dB and various samples are imaged. This optoelectronic system will allow building small and cost-effective OCT systems to monitor retinal diseases.
Semiconducting metal oxides are widely used for solar cells, poto-catalysis, bio-active materials and gas sensors. Besides the material properties of the used semiconductor,the specific surface topology of the sensor determines the device performance. We investigate the preparation and transfer suitable metals onto LIPPS structures on glass for gas sensing applications.
Deep etched structures in GaAs with high aspect ratio have promising applications in optoelectronics and MEMS devices. The key factors in their fabrication process are the choosing of proper mask material and etching conditions which results in high selectivity and an anisotropic etch profile with smooth sidewalls. In this work, we studied several types of mask materials (Al, Ni, Cr, SiO2) for deep reactive ion etching of GaAs using inductively coupled plasma system. Thus, several sets of experiments were performed with varying gas mixture, pressure and ICP/RF power. As a result, we find optimized conditions and minimal thickness of mask material for achieving deep etched (>140 m) GaAs structures.
Various carbon (nano-) forms, so-called allotropes, have become one of the most supporting activities in fundamental and applied research trends. Therefore, a universal deposition process capable of “adjusting” system parameters in one “deposition chamber” is highly demanding. Here, we present a low-pressure large area deposition system combining radiofrequency (RF) and microwave (MW) plasma in one chamber in different configurations, which offers a wide deposition window for the growth of sp2 carbon (carbon nanotubes, amorphous carbon), a mixture of sp2 and sp3 (diamond-like films) and pure sp3 carbon represented by diamond films. We will show that not only the type of plasma source (RF vs. MW) but also the gas mixture and plasma chemistry are crucial parameters for the controllable and reproducible growth of these allotropes at temperatures from 250 to 800 °C.
The properties of SiC and diamond make them attractive materials for MEMS and sensor devices. We innovated specific laser ablation techniques to fabricate membranes and cantilevers made of SiC or nano-(micro-) crystalline diamond films grown on Si/SiO2 substrates by microwave chemical vapour deposition (MWCVD). We started research to generate surface moulds to grow corrugated diamond films for membranes and cantilevers. A software tool was developed to support the design of micromechanical cantilevers. We can measure deformation and resonant frequency of diamond cantilevers and identify the global mechanical properties. A benchmark against finite element simulations enables an inverse identification of the specific system parameters and simplifies the characterization procedure.
The properties of diamond make it an attractive material for MEMS and sensor devices. We present the feasibility to fabricate membranes and cantilevers made of nano-(micro-) crystalline diamond films grown on Si/SiO2 substrates using microwave chemical vapour deposition (MWCVD). The patterning of micromechanical structures was performed by a combined process of femtosecond laser ablation and wet etching. We designed cantilever structures with varying lengths and widths (25, 50, 100, 200 and 300 μm). The cantilevers were made in a symmetric left- and right-hand configuration. An additional laser treatment was used to modify the mechanical properties of the left-hand cantilever. The deflection of the laser-treated, and non-treated sections was measured. The global mechanical system properties were simulated and corresponded with high accuracy to the measured results of deflection.
Purpose: Although there is an apparent potential in using data for advanced services in manufacturing environments, SMEs are reluctant to share data with their ecosystem partners, which prevents them from leveraging this potential. Therefore, the purpose of this paper is to analyse the reasons behind these resistances. The argumentation paves the way for elaborating countermeasures that are adequate for the specific situation and the typical capabilities of SMEs.
Design/Methodology/Approach: The analysis is based on literature research and in-depth interviews with management representatives of 15 companies in manufacturing service ecosystems. Half of these are manufacturers and the other half technology or service providers for manufacturers. They are SMEs or partly larger companies operating in structures that are typical for SMEs.
Findings: Data sharing hurdles are investigated in the five dimensions, 1. quantifying the value of data, 2. willingness to share data and trust, 3. organizational culture and mindset, 4. legal aspects, and 5. security and privacy. The ability to quantify the value of data is a necessary but not sufficient precondition for data sharing, which must be enabled by adequate measures in the other four dimensions.
Originality/Value: The findings of this empirical study and the solution approach provide an SME-specific framework to analyze hurdles that must be overcome for sharing data in an ecosystem.
Manufacturing SMEs can apply the framework to overcome the hurdles by specific insights and solution approaches. Furthermore, the analysis illustrates the future research direction of the project towards a comprehensive solution approach for data sharing in a manufacturing ecosystem.
The design and development of smart products and services with data science enabled solutions forms a core topic of the current trend of digitalisation in industry. Enabling skilled staff, employees, and students to use data science in their daily work routine of designing such products and services is a key concern of higher education institutions, including universities, company workshop providers and in further education. The scope and usage scenario of this paper is to assess software modules (‘tools’) for integrated data and analytics as service (DAaaS). The tools are usually driven by machine learning, may be deployed in cloud infrastructures, and are specifically targeted at particular needs of the industrial manufacturing, production, or supply chain sector.
The paper describes existing theories and previous work, namely methods used in didactics, work done for visually designing and using machine learning algorithms (no-code / low- code tools), as well as combinations of these two topics. For tools available on the market, an extended assessment of their suitability for a set of learning scenarios and personas is discussed.
Smart services disrupt business models and have the potential to stimulate the circular economy transition of regions, enabling an environmentally friendly atmosphere for sustainable and innovation-driven growth of regions. Although smart services are powerful means for deploying circular economy goals in industrial practices, there is little systematic guidance on how the adoption of smart services could improve resource efficiency and stimulate smart regional innovation-driven growth, enabled through circular design. Implemented in the scope of Vorarlberg’s smart specialization strategy, this paper contributes to the literature on the circular economy and regional innovation-driven growth by assessing critical factors of the value creation and value capture implemented within the scope of the quadruple helix system. By identifying the main challenges and opportunities of collaborative value creation and value capture in setting-up smart circular economy strategies and by assessing the role of innovation actors within the quadruple helix innovation system, the study provides recommendations and set of guidelines for managers and public authorities in managing circular transition. Finally, based on the analysis of the role of actors in creating shared value and scaling-up smart circular economy practices in the quadruple helix innovation systems, the paper investigates the role of banks as enablers of circular economy innovation-driven regional growth and smart value creation.
Small and medium-sized enterprises often face resource deficits and there- fore depend on cooperating with other actors to stay innovative in a competitive environment. Establishing and maintaining actual co-creation and service inter- action strategies however is challenging. A reason for this is the complexity of finding methodologies and tools to create valuable outcome and the lack of knowledge of collaboration toolsets, also in virtual environments. This paper introduces an Innovation-Method-Framework consisting of innovation methods for increased service interaction and value co-creation among service stakeholders. Also, toolsets for the framework’s practical application are provided.
Recent developments in the area of Natural Language Processing (NLP) increasingly allow for the extension of such techniques to hitherto unidentified areas of application. This paper deals with the application of state-of-the-art NLP techniques to the domain of Product Safety Risk Assessment (PSRA). PSRA is concerned with the quantification of the risks a user is exposed to during product use. The use case arises from an important process of maintaining due diligence towards the customers of the company OMICRON electronics GmbH.
The paper proposes an approach to evaluate the consistency of human-made risk assessments that are proposed by potentially changing expert panels. Along the stages of this NLP-based approach, multiple insights into the PSRA process allow for an improved understanding of the related risk distribution within the product portfolio of the company. The findings aim at making the current process more transparent as well as at automating repetitive tasks. The results of this paper can be regarded as a first step to support domain experts in the risk assessment process.
Alles bleibt anders? Profession und Disziplin Sozialer Arbeit im Kontext der Covid-19-Pandemie
(2022)
Bachground: Worldwide, more than 79.5 million people are forcibly displaced, including a significant number of migrant and refugee families with children. Migration and refugeedom affect these families in different dimensions, such as mental, physical and spiritual health. Identifying family needs and enhancing parenting skills can improve family cohesion and health, as well as smooth integration into the host country. This review is part of the Erasmus+ funded project- IENE 8 (Intercultural Education for Nurses in Europe) aiming at empowering migrant and refugee families regarding parenting skills.
Methods: This was a scoping review of literature. The IENE 8 partner countries (Cyprus, Germany, Greece, Italy, Romania, and United Kingdom) searched for peer reviewed papers, grey literature and mass media reports at international, European and national level. The time period for the search of scientific and grey literature was between2013-2018, and for mass media, it was between 2016 and 2018. Results: 124 relevant sources were identified. They included 33 Peer reviewed papers, 47 Grey literature documents and 44 mass media reports. This revealed the importance of understanding the needs of migrant families with children. Conclusion: It is evident from the literature that there is a need to support refugee parents to adjust their existing skill and to empower them to develop new ones. Healthcare and social services professionals have an essential role in improving the refugees' parenting skills. This can be done by developing and implementing family-centered and culturally-sensitive intervention programs.
Ausrechnen oder aushandeln?
(2023)
Highly-sensitive single-step sensing of levodopa by swellable microneedle-mounted nanogap sensors
(2022)
Microneedle (MN) sensing of biomarkers in interstitial fluid (ISF) can overcome the challenges of self-diagnosis of diseases by a patient, such as blood sampling, handling, and measurement analysis. However, the MN sensing technologies still suffer from poor measurement accuracy due to the small amount of target molecules present in ISF, and require multiple steps of ISF extraction, ISF isolation from MN, and measurement with additional equipment. Here, we present a swellable MN-mounted nanogap sensor that can be inserted into the skin tissue, absorb ISF rapidly, and measure biomarkers in situ by amplifying the measurement signals by redox cycling in nanogap electrodes. We demonstrate that the MN-nanogap sensor measures levodopa (LDA), medication for Parkinson disease, down to 100 nM in an aqueous solution, and 1 μM in both the skin-mimicked gelatin phantom and porcine skin.
The paper shows concepts of optical splitting based on three dimensional (3D) optical splitters based on multimode interference principle. This paper is focused on the design, fabrication and characterization of 3D MMI splitter with formed output waveguides based on IP-Dip polymer for direct application on optical fiber. The MMI optical splitter was simulated and fabricated using direct laser writing process. Output characteristics were characterized by highly resolved near-field scanning optical microscope (NSOM) and compared with 3D MMI splitter without output waveguides.
We present 256-channel, 25-GHz AWG designed for ultra-dense wavelength division multiplexing. For the design two in-house developed tools were used: AWG-Parameters tool for the calculation of input design parameters and AWGAnalyser tool, used to evaluate the simulated transmission characteristics. The AWG structure was designed for AWG central wavelength of 1550 nm and simulated with PHASAR tool from Optiwave. To keep the size of AWG structure as small as possible the number of waveguides in the phased array was tested. The simulations show that there is a certain minimum number of phased array waveguides necessary to reach sufficient AWG performance. After optimization, the AWG structure reached 10 cm x 11 cm in size and satisfying optical properties.
This paper describes two different designs of 1×8 passive optical splitters. The first splitter consists of cascade arranged directional waveguide branches (Y-branch splitter) with (0.8×0.16) µm2 waveguide cross-section. The second splitter is based on multimode interference occurring in a large MMI coupler, which uses a self-imaging effect for beam propagation, exhibiting the same waveguide core size as a Y-branch splitter. The waveguide channel profile, used in both approaches, is based on a silicon nitride material platform, with a refractive index of core being nc = 1.925 and a refractive index of cladding ncl = 1.4575. The splitters are designed as a planar structure for a medical operating wavelength 850 nm. Design, simulation, and optimization of passive optical components are performed by a commercial photonic software tool BeamPROP simulation engine by RSoft Photonics Suite tool, employing beam propagation method. This work aims to find the minimum physical dimensions of the designed splitters with the satisfactory optical performance. According to the minimum insertion loss and minimum non-uniformity, the optimum length of the splitters is determined. Finally, the optical properties of splitters for both approaches are discussed and compared with each other.
Calls for decolonising global health have intensified in recent years. The Austrian NGO plan:g Partnership for Global Health has taken several steps to decolonise its work and to find new ways of communicating and engaging in equitable partnerships. Decolonising global health cooperation is however not without its challenges.
ROS 2 in Embedded Systemen
(2022)
Das Robot Operating System in seiner zweiten Version (ROS 2) findet zunehmend Verwendung und das nicht nur in Robotern. Dieser Beitrag gibt einen Überblick über den Aufbau und die Funktion von ROS 2. Die wesentlichen Elemente werden vorgestellt, das Publish-Subscribe-Konzept, das der Kommunikation zugrunde liegt, wird erläutert. Die Anforderungen von ROS 2 an Hardware und Betriebssystem werden beleuchtet und es werden Betrachtungen zu dessen Echtzeitverhalten gemacht.
Due to the increasing trend of photonic element miniaturisation and the need for optical splitting, we propose and simulate a new type of three-dimensional (3D) optical splitter based on multimode interference (MMI) for the wavelength of 1550 nm. We present various designs and simulations of various parameters for the optimized MMI splitter. We focus on the possibility of its integration on an optical fiber. The design is focused on a possible production process using 3D laser lithography for the prepared experiments. The MMI splitter was prepared by laser lithography using direct writing process and finally investigated by output characterisation by the near-field measurement.
In this paper, we document optical splitters based on Y-branch and also on MMI splitting principle. The 1×4 Y-branch splitter was prepared in 3D geometry fully from polymer approaching the single mode transmission at 1550 nm. We also prepared new concept of 1×4 MMI optical splitter. Their optical properties and character of output optical field were measured by near-field scanning optical microscope. Splitting properties and optical outputs of both splitters are very promising and increase an attractiveness of presented 3D technology and polymers.
The paper deals with the optimization of 2x2 optical switch for photonic integrated circuits based on two 2x2 MMI splitters and two phase-modulators. The optical switch was modelled in the RSoftCAD with the simulation tool BeamPROP. The optimization was done to minimise the insertion losses and broaden the spectral band at 1550 nm by using linear tapers in a 2x2 MMI splitter topology. The 2x2 optical switch is a common element for creating more complex 1xN or NxN optical switches in all-optical signal processing.
Design, simulation, and optimization of the 1×4 optical three-dimensional multimode interference splitter using IP-Dip polymer as a core and polydimethylsiloxane (PDMS) Sylgard 184 as a cladding is demonstrated. The splitter was simulated by using beam propagation method in BeamPROP simulation module of RSoft photonic tool and optimized for an operating wavelength of 1.55 μm . According to the minimum insertion loss, the dimensions of the splitter were optimized for a waveguide with a core size of 4×4 μm2 . The objective of the study is to create the design for fabrication by three-dimensional direct laser writing optical lithography.
In this paper we present various educational activities with Photonics Explorer, an educational kit developed by the photonics research team B - PHOT at VUB (Vrije Universiteit Brussel) for students at secondary schools. The concept is a ‘lab-in-a-box’ that enables students of the 2 nd and 3 rd grade to do photonics experiments themselves at school with lasers, LEDs, lenses, optical fibers, and other high-tech components. Even though, the kit was developed for the secondary schools, we use experiments from the kit also for some other teaching activities such as lectures at the university, photonics workshops for teachers and children at primary/secondary schools or for events such as children's/youth's university or the night of sciences. In the frame of Austrian based project Phorsch! we have organized most of these activities which will be presented here.
A new software tool, called AWG-Channel-Spacing, is developed to calculate accurate channel spacing of an arrayed waveguide gratings (AWG) optical multiplexer/demultiplexer. This tool has been developed with the application framework QT in the programming language C++. The tool was evaluated with a design of 20-channel 200 GHz AWG. The achieved simulated transmission characteristics prove the correct functionality of the tool.
A new software tool, called AWG-Wuckler, is developed to calculate geometric parameters of arrayed waveguide grating structures for telecommunication and medical applications. These parameters are crucial for a AWG layout which will be created and simulated using commercial photonic design tools. The design process of AWG is very complex because its geometric dimensions depend on a large number of input design parameters and other input design parameters. Often geometric constraints require an adjustment of the input design parameters and vice versa. Calculation and adjustment of the geometric parameters is a time-consuming process that is currently not fully supported by any commercial photonic tool. AWG-Wuckler tool overcomes this issue and offers a fast and easy to use solution. The tool was already applied in various AWG designs and is technologically well proven.