nein
Refine
Year of publication
Document Type
- Conference Proceeding (74)
- Article (70)
- Part of a Book (24)
- Book (18)
- Other (5)
- Master's Thesis (2)
- Doctoral Thesis (1)
- Report (1)
Institute
- Forschungszentrum Mikrotechnik (59)
- Soziales & Gesundheit (50)
- Wirtschaft (32)
- Forschungszentrum Business Informatics (22)
- Forschungsgruppe Empirische Sozialwissenschaften (15)
- Forschungszentrum Human Centred Technologies (15)
- Technik | Engineering & Technology (12)
- Department of Computer Science (Ende 2021 aufgelöst; Integration in die übergeordnete OE Technik) (8)
- Forschungszentrum Digital Factory Vorarlberg (8)
- Forschung (7)
Keywords
- photonics (6)
- Laser ablation (5)
- Soziale Arbeit (5)
- arrayed waveguide gratings (5)
- Ausscheidung (4)
- Controlling (4)
- Kultur (4)
- Y-branch splitter (4)
- 3D MMI splitter (3)
- Arrayed waveguide gratings (3)
International Entrepreneurship explains the opportunities and challenges facing internationalizing entrepreneurial ventures. The book inlcudes a thorough discussion of fundamentals as well as contemporary research findings. Numerous cases, featuring diverse contexts, illustrate theory and help classroom use.
The properties of diamond make it an attractive material for MEMS and sensor devices. We present the feasibility to fabricate membranes and cantilevers made of nano-(micro-) crystalline diamond films grown on Si/SiO2 substrates using microwave chemical vapour deposition (MWCVD). The patterning of micromechanical structures was performed by a combined process of femtosecond laser ablation and wet etching. We designed cantilever structures with varying lengths and widths (25, 50, 100, 200 and 300 μm). The cantilevers were made in a symmetric left- and right-hand configuration. An additional laser treatment was used to modify the mechanical properties of the left-hand cantilever. The deflection of the laser-treated, and non-treated sections was measured. The global mechanical system properties were simulated and corresponded with high accuracy to the measured results of deflection.
Femtosecond laser ablation on Si generates 2D ripple structures, known as laser induced periodic surface structures (LIPSS) and pinholes. We fabricated membranes with 20 to 50 μm thickness perforated by an array of tapered pinholes up to 5 μm in diameter and 10 to 20 μm spacing. Within several micrometer the pinholes transform into hollow photonic waveguides with constant diameter from 1μm to 2μm. Such structures offer a 3D photonic coupling device for polymer Y-branch- and MMI-splitter. We measured a considerable change of electrical resistivity for 500 ppm H2 in air using Si/SiO2/TiO2 substrates with 2D LIPSS. We propose to investigate 3D waveguide arrays also for photonic-chemical sensors.
By a simple femtosecond laser process, we fabricated metal-oxide/gold composite films for electrical and optical gas sensors. We designed a dripple wavelength AWG-spectrometer, matched to the plasma absorption wavelength region of the composite films. H2/CO absorptions fit well with the AWG design for multi gas detection sensor arrays
Oral applications of ultra-short laser pulses - a new approach for gentle and painless treatment?
(2006)
Budo als Oberbegriff für die traditionellen Kampfkünste, eigentlich namentlich Japans, aber hier im weiteren Sinne alle Kampf- und Bewegungskünste Asiens, die sich als Weg und nicht Sport begreifen, ist in den letzten Jahren vermehrt Gegenstand der öffentlichen Diskussion. Jüngere Veröffentlichungen zum Thema nehmen das historisch, philosophisch, psychologisch und pädagogisch Besondere und sich vom modernen Kampfsport gänzlich Unterscheidende in den Blick, ohne dass allerdings weiterhin begrifflich und inhaltlich falsche Vorstellungen durch die absurde Vereinnahmung der allein dem Budo zugeschrieben Wesenszüge und Wirkweisen in sog. "Budo-Sport"-Verbänden immer mehr verbreiten. Gerade so, als könne man dem modernen Kampfsport durch den Zusatz "Budo" (der suggerieren soll, man beziehe sich auf dessen Wesentliche, "Geistige") etwa einen ehrwürdig-traditionellen Charakter verleihen und den Wettkampfsport bereichern, gar ethisch aufwerten.
Insofern bedarf es immer noch oder immer mehr der Aufklärung darüber, was denn das eigentliche Wesen und Wirken von Budo überhaupt ausmacht, um dem Ganzen gerecht zu werden. Dabei soll sich dieses Buch nun weniger auf die historische, seit der Edo-Periode (1600-1868) vor allem vom Zen-Buddhismus (neben Konfuzianismus und Taoismus sowie Shaolin) geprägte Entwicklung von Budo aus den alten Kriegskünsten (Bugei und Bujutsu) eingehen, als auf das nunmehr auch heute noch Wesentliche und "Spezielle".
Budo als spirituelle wie praktisch-philosophische Weg-Lehre und dadurch Kampf-"Kunst" kann, recht verstanden, ein einzigartiger Schatz in der Theorie und Praxis des Studiums von "Kampf" und "Kämpfen-Können" sowie des Selbst sein, und am Ende auch des eigenen Lebens. Budo wirkt!
Es ist ein auf Bewegung, Begegnung und Besinnung angelegtes bewährtes ganzheitliches Instrument der Selbsterziehung, Charakterschulung und Persönlichkeitsentwicklung und als originärer Weg ("Do") zum "Friedvollen Krieger" eine konkrete Anleitung zu körperlicher, seelischer, geistiger, d.h. psycho-physischer wie psycho-emotionaler Selbstbeherrschung, die auf der Grundlage von stetig geübter Achtsamkeit und Wertschätzung in der Meisterschaft zu Einsicht und Gewaltverzicht führt. In diesem Buch wird das Thema Budo, sein Wesen und Wirken, aus Erfahrung und wissenschaftlicher Erkenntnis heraus analysiert, um ein ebenso weitergehendes wie tieferes Verständnis von der Sache zu fördern.
Die Autoren (Vorstellung im entsprechenden Kapitel hinten), allesamt!
Digital twin as enabler of business model innovation for infrastructure construction projects
(2023)
Emerging technologies and methods are becoming an important element of the construction industry. Digital Twins are used as a base to store data in BIM models and make use out of the data respectively make the data visible. The transparency in all phases of the lifecycle of building and infrastructure assets is crucial in order to get a more efficient lifecycle of planning, construction and maintenance. Whereas other industries increased performance in these phases by making use out of the data, construction industry is stuck in traditional methods and business models. In this paper we propose a concept that focuses on the digital production twin. The comparison of planning data with As-Is production data can empower a data driven continuous improvement process and support the decision making process of future innovations and suitable business models. This paper outlines the possibility to use the data stored in a digital twin with regards to the evaluation of possible business models.
Through mandatory ESG (environmental, social, governance) reporting large companies must disclose their ESG activities showing how sustainability risks are incorporated in their decision-making and production processes. This disclosure obligation, however, does not apply to small and medium-sized enterprises (SME), creating a gap in the ESG dataset. Banks are therefore required to collect sustainability data of their SME customers independently to ensure complete ESG integration in the risk analysis process for loans. In this paper, we examine ESG risk analysis through a smart science approach laying the focus on possible value outcomes of sustainable smart services for banks as well as for their (SME) customers. The paper describes ESG factors, how services can be derived from them, targeted metrics of ESG and an ESG Service Creation Framework (business ecosystem building, process model, and value creation). The description of an exemplary use case highlighting the necessary ecosystem for service creation as well as the created value concludes the paper.
Smart services disrupt business models and have the potential to stimulate the circular economy transition of regions, enabling an environmentally friendly atmosphere for sustainable and innovation-driven growth of regions. Although smart services are powerful means for deploying circular economy goals in industrial practices, there is little systematic guidance on how the adoption of smart services could improve resource efficiency and stimulate smart regional innovation-driven growth, enabled through circular design. Implemented in the scope of Vorarlberg’s smart specialization strategy, this paper contributes to the literature on the circular economy and regional innovation-driven growth by assessing critical factors of the value creation and value capture implemented within the scope of the quadruple helix system. By identifying the main challenges and opportunities of collaborative value creation and value capture in setting-up smart circular economy strategies and by assessing the role of innovation actors within the quadruple helix innovation system, the study provides recommendations and set of guidelines for managers and public authorities in managing circular transition. Finally, based on the analysis of the role of actors in creating shared value and scaling-up smart circular economy practices in the quadruple helix innovation systems, the paper investigates the role of banks as enablers of circular economy innovation-driven regional growth and smart value creation.
Complementarities and synergies of quadruple helix innovation design in smart city development
(2020)
Increased urbanization trends are stimulating regional needs to support transitions from urban environments to smart cities, using its holistic perspective as a source to innovation. Strong relations between smart cities, urban and regional development, are getting increased attention both at policy and implementation level, providing fertile ground for execution of the new European policy frameworks that supports quadruple helix approaches to innovation. Smart specialization strategies (RIS3) encompass such initiatives, placing ICT and collaboration between academia, industry, government, and citizen at the center of urban innovation. However, there is still lack of research on effects of such approaches to innovation, involving both quadruple helix clusters and ICT in utilizing innovation potentials for developing smart cities. This study aims to increase the understanding on how quadruple helix urban innovation strengthens competitiveness of regions by improving its local smart areas – RIS3. We identified smart specialization patterns and applied comparative benchmark between nine smallmedium sized urban regions in Central Europe. Building on these results, the study provides an overview of the effects of RIS3 strategies implemented through quadruple helix innovation clusters on competitiveness of regions and Smart City development.
A multi-recombinative active matrix adaptation evolution strategy for constrained optimization
(2019)
Analysis of the (μ/μI,λ)-CSA-ES with repair by projection applied to a conically constrained problem
(2019)
In this paper, a 256-channel, 10-GHz arrayed waveguide gratings demultiplexer for ultra-dense wavelength division multiplexing was designed using an in-house developed tool called AWG-Parameters. The AWG demultiplexer was designed for a central wavelength of 1550 nm and the structure was simulated in PHASAR tool from Optiwave. Two different AWG designs were developed and the influence of the design parameters on the AWG performance was studied.
We present 256-channel, 25-GHz AWG designed for ultra-dense wavelength division multiplexing. For the design two in-house developed tools were used: AWG-Parameters tool for the calculation of input design parameters and AWGAnalyser tool, used to evaluate the simulated transmission characteristics. The AWG structure was designed for AWG central wavelength of 1550 nm and simulated with PHASAR tool from Optiwave. To keep the size of AWG structure as small as possible the number of waveguides in the phased array was tested. The simulations show that there is a certain minimum number of phased array waveguides necessary to reach sufficient AWG performance. After optimization, the AWG structure reached 10 cm x 11 cm in size and satisfying optical properties.
Arrayed Waveguide Grating (AWG) is a passive optical component, which have found applications in a wide range of photonic applications including telecommunications and medicine. Silica-on-Silicon (SoS) based AWGs use a low refractive-index contrast between the core (waveguide) and the cladding which leads to some significant advantages such as low propagation losses and low fiber coupling losses between the AWG waveguides and the fibres. Therefore, they are an attractive DWDM solution offering higher channel count technology and good performance characteristics compared to other methods. However, the very low refractive-index contrast means the bending radius of the waveguides needs to be very large (on the order of several millimeters) and may not fall below a particular critical value to suppress bending losses. As a result, silica-based waveguide devices usually have a very large size that limits the integration density of SiO2-based photonic integrated devices. High-index contrast AWGs (such as silicon, silicon nitride or polymer-based waveguide devices) feature much smaller waveguide size compared to low index contrast AWGs. Such compact devices can easily be implemented on a chip and have already found applications in emerging applications such as optical sensors, devices for DNA diagnostics and optical spectrometers for infrared spectroscopy.In this work, we present the design, simulation, technological verification and applications of both, the low-index contrast and high-index contrast AWGs. For telecommunication applications AWG-MUX/Demux with up to 128-channels will be presented. For medical applications the AWG-spectrometer with up to 512-channels will be presented.This work was carried out in the framework of the projects: ADOPT No. SK-AT-20-0012, NOVASiN No. SK-AT-20-0017 and AUTOPIC No. APVV-17-0662 from Slovak research and development agency of Ministry of Education, Science, Research and Sport of the Slovak Republic and No. SK 07/2021 and SK 08/2021 from Austrian Agency for International Cooperation in Education and Research (OeAD-GmbH); and project PASTEL, no. 2020-10-15-001, funded by SAIA.
We present design, simulation and optimization of polymer based 16-channel, 100-GHz AWG designed for central wavelength of 1550 nm. The input design parameters were calculated applying AWG-Parameters tool. The simulations were performed applying a commercial photonic tool PHASAR from Optiwave. The achieved transmission characteristics were evaluated by AWG-Analyzer tool and show a satisfying agreement between designed and simulated AWG optical properties. Finally, the influence of the number of phased array (PA) waveguides on the AWG performance was studied. The results show that there is a certain minimum number of PA waveguides necessary to reach sufficient AWG performance.
We present design of planar 16-channel, 100-GHz multi-mode polymer-based AWG. This AWG was designed for central wavelength of 1550 nm applying AWG-Parameters tool. The AWG structure was created and simulated in the commercial photonic tool PHASAR from Optiwave. Achieved transmission characteristics were evaluated by AWG-Analyzer tool. For the design, multi-mode waveguides having a cross-section of (4x4) µm2 were used. The simulated results show strong worsening of the transmission characteristics in comparison when using single-mode waveguides. Nevertheless, the transmitting channels are clearly separated. The reason for using thicker multi-mode waveguides in the design is possibility to fabricate the AWG structure on polymer basis using direct laser writing lithography.
In this work, we investigated the influence of different etch depths of the rib waveguides on the performance of SiN-based AWGs. For this purpose, an 8-channel 100 GHz AWG was designed for a center wavelength of 850 nm. The design parameters entered were calculated using the AWG-Parameters tool. The simulations were performed with a commercial photonic tool PHASAR from Optiwave. The simulated performance was evaluated using the AWG-Analyzer tool. For the AWG design, we used three identical rib waveguides with different etch depths to simulate possible etch imperfection. The simulations show the wavelength shift and degradation of the AWG performance.
In this paper we present various educational activities with Photonics Explorer, an educational kit developed by the photonics research team B - PHOT at VUB (Vrije Universiteit Brussel) for students at secondary schools. The concept is a ‘lab-in-a-box’ that enables students of the 2 nd and 3 rd grade to do photonics experiments themselves at school with lasers, LEDs, lenses, optical fibers, and other high-tech components. Even though, the kit was developed for the secondary schools, we use experiments from the kit also for some other teaching activities such as lectures at the university, photonics workshops for teachers and children at primary/secondary schools or for events such as children's/youth's university or the night of sciences. In the frame of Austrian based project Phorsch! we have organized most of these activities which will be presented here.
In this paper, design of 1×8 multimode interference passive optical splitter is proposed. The structure of the splitter is designed based on a silicon nitride material platform. This work aims to find the minimum physical dimensions of the designed splitters with the satisfactory optical performance. According to the minimum insertion loss and minimum non-uniformity, the optimum length of the splitters is determined.
This paper presents the design, simulation, and optimization of a 1×128 multimode interference (MMI) splitter with a silica-on-silicon channel profile. This work aims to study the influence of the different S-Bend output waveguide shapes at the end of the MMI coupler on the final optical properties. The 1×128 MMI splitters have been simulated using beam propagation method in OptiBPM software. The optical properties of all considered splitters with different shapes of outputs waveguides are discussed and compared with each other. Based on the minimum insertion loss and non-uniformity, the final shape of output waveguides, ensuring the lowest losses, is determined.
This paper describes two different designs of 1×8 passive optical splitters. The first splitter consists of cascade arranged directional waveguide branches (Y-branch splitter) with (0.8×0.16) µm2 waveguide cross-section. The second splitter is based on multimode interference occurring in a large MMI coupler, which uses a self-imaging effect for beam propagation, exhibiting the same waveguide core size as a Y-branch splitter. The waveguide channel profile, used in both approaches, is based on a silicon nitride material platform, with a refractive index of core being nc = 1.925 and a refractive index of cladding ncl = 1.4575. The splitters are designed as a planar structure for a medical operating wavelength 850 nm. Design, simulation, and optimization of passive optical components are performed by a commercial photonic software tool BeamPROP simulation engine by RSoft Photonics Suite tool, employing beam propagation method. This work aims to find the minimum physical dimensions of the designed splitters with the satisfactory optical performance. According to the minimum insertion loss and minimum non-uniformity, the optimum length of the splitters is determined. Finally, the optical properties of splitters for both approaches are discussed and compared with each other.
This paper presents design, simulation, and optimization of the three-dimensional 1×4 optical multimode interference splitter using IP-Dip polymer as a core and polydimethylsiloxane (PDMS) Sylgard 184 as a cladding. The splitter was simulated by using beam propagation method in BeamPROP simulation engine of RSoft photonic tool and optimized for an operating wavelength of 1.55 µm. According to the minimum insertion loss, the dimensions of the MMI coupler and the length of the whole MMI splitter structure were optimized applying a waveguide with a core size of 4×4 µm2. The objective of the study is to create a design for fabrication by three-dimensional direct laser writing optical lithography.
Design, simulation, and optimization of the 1×4 optical three-dimensional multimode interference splitter using IP-Dip polymer as a core and polydimethylsiloxane (PDMS) Sylgard 184 as a cladding is demonstrated. The splitter was simulated by using beam propagation method in BeamPROP simulation module of RSoft photonic tool and optimized for an operating wavelength of 1.55 μm . According to the minimum insertion loss, the dimensions of the splitter were optimized for a waveguide with a core size of 4×4 μm2 . The objective of the study is to create the design for fabrication by three-dimensional direct laser writing optical lithography.
In this paper, the design of three-dimensional configuration of Y-branch splitter is compared with Multimode Interference splitter. Both splitters use the IP-Dip polymer as a standard material for 3D laser lithography. The optical properties of the splitters for both approaches are discussed and compared.
Design, simulation, and optimization of the 1×4 optical three-dimensional multimode interference splitter using IP-Dip polymer as a core and polydimethylsiloxane (PDMS) Sylgard 184 as a cladding is demonstrated. The splitter was simulated by using beam propagation method in BeamPROP simulation module of RSoft photonic tool and optimized for an operating wavelength of 1.55 μm . According to the minimum insertion loss, the dimensions of the splitter were optimized for a waveguide with a core size of 4×4 μm2 . The objective of the study is to create the design for fabrication by three-dimensional direct laser writing optical lithography.
The usage of data gathered for Industry 4.0 and smart factory scenarios continues to be a problem for companies of all sizes. This is often the case because they aim to start with complicated and time-intensive Machine Learning scenarios. This work evaluates the Process Capability Analysis (PCA) as a pragmatic, easy and quick way of leveraging the gathered machine data from the production process. The area of application considered is injection molding. After describing all the required domain knowledge, the paper presents an approach for a continuous analysis of all parts produced. Applying PCA results in multiple key performance indicators that allow for fast and comprehensible process monitoring. The corresponding visualizations provide the quality department with a tool to efficiently choose where and when quality checks need to be performed. The presented case study indicates the benefit of analyzing whole process data instead of considering only selected production samples. The use of machine data enables additional insights to be drawn about process stability and the associated product quality.