Refine
Year of publication
Document Type
- Conference Proceeding (373) (remove)
Institute
- Forschungszentrum Mikrotechnik (134)
- Technik | Engineering & Technology (82)
- Forschungszentrum Business Informatics (64)
- Department of Computer Science (Ende 2021 aufgelöst; Integration in die übergeordnete OE Technik) (60)
- Wirtschaft (49)
- Forschungszentrum Human Centred Technologies (48)
- Forschungsgruppe Empirische Sozialwissenschaften (24)
- Forschungszentrum Energie (24)
- Department of Engineering (Ende 2021 aufgelöst; Integration in die übergeordnete OE Technik) (19)
- Didaktik (mit 31.03.2021 aufgelöst; Integration ins TELL Center) (15)
Has Fulltext
- no (373) (remove)
Is part of the Bibliography
- yes (373)
Keywords
- arrayed waveguide gratings (9)
- Y-branch splitter (6)
- integrated optics (6)
- photonics (6)
- MMI splitter (5)
- AWG design (4)
- insertion loss (4)
- Arrayed waveguide gratings (3)
- Artificial Intelligence (incl. Robotics) (3)
- Crosstalk (3)
In this paper, a 256-channel, 10-GHz arrayed waveguide gratings demultiplexer for ultra-dense wavelength division multiplexing was designed using an in-house developed tool called AWG-Parameters. The AWG demultiplexer was designed for a central wavelength of 1550 nm and the structure was simulated in PHASAR tool from Optiwave. Two different AWG designs were developed and the influence of the design parameters on the AWG performance was studied.
The paper shows concepts of optical splitting based on three dimensional (3D) optical splitters based on multimode interference principle. This paper is focused on the design, fabrication and characterization of 3D MMI splitter with formed output waveguides based on IP-Dip polymer for direct application on optical fiber. The MMI optical splitter was simulated and fabricated using direct laser writing process. Output characteristics were characterized by highly resolved near-field scanning optical microscope (NSOM) and compared with 3D MMI splitter without output waveguides.
In this paper, we document optical splitters based on Y-branch and also on MMI splitting principle. The 1×4 Y-branch splitter was prepared in 3D geometry fully from polymer approaching the single mode transmission at 1550 nm. We also prepared new concept of 1×4 MMI optical splitter. Their optical properties and character of output optical field were measured by near-field scanning optical microscope. Splitting properties and optical outputs of both splitters are very promising and increase an attractiveness of presented 3D technology and polymers.
A modified matrix adaptation evolution strategy with restarts for constrained real-world problems
(2020)
In combination with successful constraint handling techniques, a Matrix Adaptation Evolution Strategy (MA-ES) variant (the εMAg-ES) turned out to be a competitive algorithm on the constrained optimization problems proposed for the CEC 2018 competition on constrained single objective real-parameter optimization. A subsequent analysis points to additional potential in terms of robustness and solution quality. The consideration of a restart scheme and adjustments in the constraint handling techniques put this into effect and simplify the configuration. The resulting BP-εMAg-ES algorithm is applied to the constrained problems proposed for the IEEE CEC 2020 competition on Real-World Single-Objective Constrained optimization. The novel MA-ES variant realizes improvements over the original εMAg-ES in terms of feasibility and effectiveness on many of the real-world benchmarks. The BP-εMAg-ES realizes a feasibility rate of 100% on 44 out of 57 real-world problems and improves the best-known solution in 5 cases.
Active demand side management with domestic hot water heaters using binary integer programming
(2013)
Adaptive indirect fieldoriented control of an induction machine in the armature control range
(2012)
With Cloud Computing and multi-core CPUs parallel computing resources are becoming more and more affordable and commonly available. Parallel programming should as well be easily accessible for everyone. Unfortunately, existing frameworks and systems are powerful but often very complex to use for anyone who lacks the knowledge about underlying concepts. This paper introduces a software framework and execution environment whose objective is to provide a system which should be easily usable for everyone who could benefit from parallel computing. Some real-world examples are presented with an explanation of all the steps that are necessary for computing in a parallel and distributed manner.
In contrast to fossil energy sources, the supply by renewable energy sources likewind and photovoltaics can not be controlled. Therefore, flexibilities on the demandside of the electric power grid, like electro-chemical energy storage systems, are usedincreasingly to match electric supply and demand at all times. To control those flex-ibilities, we consider two algorithms that both lead to linear programming problems.These are solved autonomously on the demand side, i.e., by household computers.In the classic approach, an energy price signal is sent by the electric utility to thehouseholds, which, in turn, optimize the cost of consumption within their constraints.Instead of an energy price signal, we claim that an appropriate power signal that istracked in L1-norm as close as possible by the household has favorable character-istics. We argue that an interior point of the household’s feasibility region is neveran optimal price-based point but can result in a L1-norm optimal point. Thus, pricesignals can not parametrize the complete feasibility region which may not lead to anoptimal allocation of consumption.We compare the price and power tracking algorithms over a year on the base ofone-day optimizations regarding different information settings and using a large dataset of daily household load profiles. The computational task constitutes an embarrassingly parallel problem. To this end, the performance of the two parallel computation frameworks DEF [1] and Ray [2] are investigated. The Ray framework is used to run the Python applications locally on several cores. With the DEF frameworkwe execute our Python routines parallelly in a cloud. All in all, the results providean understanding of when which computation framework and autonomous algorithmwill outperform the other.
Application of various tools to design, simulate and evaluate optical demultiplexers based on AWG
(2015)
Ursprünglich wurde für das K-Projekt „LiTech“ eine mobile und intuitive Robotersteuerung – mit Touchbedienung und Augmented Reality – programmiert. Ziel war es, einen Industrieroboter spontan steuern zu können, mit besonderem Augenmerk auf Laienfreundlichkeit. Das System besteht aus einem Roboter und einem PC der als Bildschirm eine mit kapazitivem Touch ausgestattete und von einem Projektor bespielte Glasscheibe hat. Daten werden als String über eine serielle Schnittstelle übermittelt. Zur Erforschung der Nutzerfreundlichkeit werden Bälle auf einer Ebene hin- und herbewegt. Zur Cloud-Datenauswertung und Erstellung der Visualisierung wurden mittlerweile weitere Forschungszentren der FH Vorarlberg eingebunden. Im laufenden Wintersemester arbeitet ein Praktikant aus Südamerika an der Erweiterung auf den kompletten 3D-Raum mit möglicher Implementierung einer Gestensteuerung. Ziel des Beitrags ist es, den Versuchsaufbau und die Steuerung des Roboters zu beschreiben sowie geplante Weiterentwicklungen aufzuzeigen.
Auslandssemester im Karrierefokus – Evaluierung der Auslandssemester am Beispiel einer Hochschule
(2015)
Die vorliegende Studie untersucht die Auswirkungen der Covid-Pandemie auf die Finanzierungssituation von Unternehmen in Vorarlberg. Besonderes Augenmerk wird dabei auf kleine und mittlere Unternehmen sowie deren Eigenkapitalausstattung gelegt. Die Analyse erfolgt anhand einer quantitativen Befragung von 569 Unternehmen im Zeitraum Ende Oktober/Anfang November 2021. Ein Großteil der befragten Unternehmen schätzt die Finanzierungssituation insgesamt als befriedigend oder besser ein. Eigenkapital wird die höchste Relevanz aller Finanzierungsquellen zugesprochen. Obwohl 39% der befragten Unternehmen eine Eigenkapitalerhöhung für Ihr Unternehmen als nötig erachten, haben aktuell nur 14% Überlegungen in diese Richtung. Die Ergebnisse der Studie weisen darauf hin, dass eine Beseitigung der steuerlichen Bevorzugung von Fremdkapital (Debt Bias) einen relevanten Anreiz für Eigenkapitalerhöhungen liefern könnte.
The photonic integrated circuits are required in the next generations of coherent terabit optical communications. The software tools for automated adjustment and coupling of optical fiber arrays to photonic integrated circuits has been developed. The obtained results are needed in final production phase in the technology process of photonic integrated circuits packaging.
The usage of data gathered for Industry 4.0 and smart factory scenarios continues to be a problem for companies of all sizes. This is often the case because they aim to start with complicated and time-intensive Machine Learning scenarios. This work evaluates the Process Capability Analysis (PCA) as a pragmatic, easy and quick way of leveraging the gathered machine data from the production process. The area of application considered is injection molding. After describing all the required domain knowledge, the paper presents an approach for a continuous analysis of all parts produced. Applying PCA results in multiple key performance indicators that allow for fast and comprehensible process monitoring. The corresponding visualizations provide the quality department with a tool to efficiently choose where and when quality checks need to be performed. The presented case study indicates the benefit of analyzing whole process data instead of considering only selected production samples. The use of machine data enables additional insights to be drawn about process stability and the associated product quality.
The electricity demand due to the increasing number of EVs presents new challenges for the operation of the electricity network, especially for the distribution grids. The existing grid infrastructure may not be sufficient to meet the new demands imposed by the integration of EVs. Thus, EV charging may possibly lead to reliability and stability issues, especially during the peak demand periods. Demand side management (DSM) is a potential and promising approach for mitigation of the resulting impacts. In this work, we developed an autonomous DSM strategy for optimal charging of EVs to minimize the charging cost and we conducted a simulation study to evaluate the impacts to the grid operation. The proposed approach only requires a one way communicated incentive. Real profiles from an Austrian study on mobility behavior are used to simulate the usage of the EVs. Furthermore, real smart meter data are used to simulate the household base load profiles and a real low voltage grid topology is considered in the load flow simulation. Day-ahead electricity stock market prices are used as the incentive to drive the optimization. The results for the optimum charging strategy is determined and compared to uncontrolled EV charging. The results for the optimum charging strategy show a potential cost saving of about 30.8% compared to uncontrolled EV charging. Although autonomous DSM of EVs achieves a shift of load as pursued, distribution grid operation may be substantially affected by it. We show that in the case of real time price driven operation, voltage drops and elevated peak to average powers result from the coincident charging of vehicles during favourable time slots.
A new software tool, called AWG-Channel-Spacing, is developed to calculate accurate channel spacing of an arrayed waveguide gratings (AWG) optical multiplexer/demultiplexer. This tool has been developed with the application framework QT in the programming language C++. The tool was evaluated with a design of 20-channel 200 GHz AWG. The achieved simulated transmission characteristics prove the correct functionality of the tool.
By a simple femtosecond laser process, we fabricated metal-oxide/gold composite films for electrical and optical gas sensors. We designed a dripple wavelength AWG-spectrometer, matched to the plasma absorption wavelength region of the composite films. H2/CO absorptions fit well with the AWG design for multi gas detection sensor arrays
A new software tool, called AWG-Wuckler, is developed to calculate geometric parameters of arrayed waveguide grating structures for telecommunication and medical applications. These parameters are crucial for a AWG layout which will be created and simulated using commercial photonic design tools. The design process of AWG is very complex because its geometric dimensions depend on a large number of input design parameters and other input design parameters. Often geometric constraints require an adjustment of the input design parameters and vice versa. Calculation and adjustment of the geometric parameters is a time-consuming process that is currently not fully supported by any commercial photonic tool. AWG-Wuckler tool overcomes this issue and offers a fast and easy to use solution. The tool was already applied in various AWG designs and is technologically well proven.
Black titanium dioxide in situ generated on femtosecond laser induced periodic surface structures
(2018)
Calculation of accurate channel spacing of an AWG optical demultiplexer applying proportional method
(2015)
We report resent results on the fabrication and characterization of carbon nanogap interdigitated electrode arrays (IDAs) for biosensor applications based on redox cycling. The electrochemical results of the carbon electrodes are compared to our fabricated gold electrodes with similar nanogap distances. The amplification factor and the collection efficiency were recorded by chronoamperometry. Cyclic voltammetry (CV) was utilized to determine the oxidation and reduction potentials as well as for monitoring the electron transfer process. The different deposited carbon materials were characterized by Raman spectroscopy.At present, we successfully fabricated carbon nanogaps down to 80 nm and we are convinced to reach the present fabrication limit of about 30 nm (for gold and platinum electrodes) with carbon as electrode material as well. To the best of our knowledge, this is the first IDA nanogap sensor, which features a gap distance under 100 nm with amorphous carbon as electrode material. Moreover, we present a signal amplification of 32 for carbon electrodes by redox cycling, which is the highest reported amplification so far.
Chancen zum Lernen nutzen
(2018)
Compact and high-resolution 256-channel silicon nitride based AWG-spectrometer for OCT on a chip
(2019)
We present design, simulation and technological verification of a compact 256-channel, 42-GHz silicon nitride based AWG-spectrometer. The spectrometer was designed for TM-polarized light with a central wavelength of 850 nm, applying “AWG-Parameters” tool. This design is based on a previous study of various AWG designs (8-channel, 100-GHz; 20-channel, 50-GHz; 40-channel, 50-GHz, 80-channel, 50-GHz and 160-channel, 50-GHz AWGs), which were all technologically verified. The spectrometer features small size and high resolution. It is integrated on OCT chip using standard CMOS processes. The SD-OCT system is developed to operate in a wavelength range from 800 nm to 900 nm, having 0.1 nm resolution.
This paper describes two different designs of 1×8 passive optical splitters. The first splitter consists of cascade arranged directional waveguide branches (Y-branch splitter) with (0.8×0.16) µm2 waveguide cross-section. The second splitter is based on multimode interference occurring in a large MMI coupler, which uses a self-imaging effect for beam propagation, exhibiting the same waveguide core size as a Y-branch splitter. The waveguide channel profile, used in both approaches, is based on a silicon nitride material platform, with a refractive index of core being nc = 1.925 and a refractive index of cladding ncl = 1.4575. The splitters are designed as a planar structure for a medical operating wavelength 850 nm. Design, simulation, and optimization of passive optical components are performed by a commercial photonic software tool BeamPROP simulation engine by RSoft Photonics Suite tool, employing beam propagation method. This work aims to find the minimum physical dimensions of the designed splitters with the satisfactory optical performance. According to the minimum insertion loss and minimum non-uniformity, the optimum length of the splitters is determined. Finally, the optical properties of splitters for both approaches are discussed and compared with each other.
Comparison of silicon nitride based 1x8 Y-branch splitters applying different waveguide structures
(2019)
This paper presents design, simulation and optimization of 1x8 Y-branch power splitters based on Si/SiO2/SiN/SiOx material platform. For the designs, two different waveguide structures were used, i.e. ridge and rib waveguides. The splitters were designed for 850 nm spectral optical window and the simulations were performed applying FEM and BPM methods in RSoft photonic tool. The aim of this work was to find minimum physical dimensions of the designed splitters occupying minimal space on PIC chip. The optimization was done with regards to high symmetrical splitting ratio and low insertion loss. Finally, the optical properties of both splitters were studied and compared with each other.
Comparison of silicon nitride based 8-channel 100-GHz AWGs applying different waveguide structures
(2019)
This paper presents design and simulation of 8-channel, 100-GHz AWGs based on Si/SiO2/SiN/SiOx material platform. For the designs, two different waveguide structures were used, i.e. ridge and rib waveguides. AWGs were designed for central wavelength of 850 nm applying AWG-Parameters tool. The simulations were performed applying FEM and BPM methods in RSoft and PHASAR photonic tools. The simulation results show considerably lower losses but slightly higher channel crosstalk when applying rib waveguides.
Complementarities and synergies of quadruple helix innovation design in smart city development
(2020)
Increased urbanization trends are stimulating regional needs to support transitions from urban environments to smart cities, using its holistic perspective as a source to innovation. Strong relations between smart cities, urban and regional development, are getting increased attention both at policy and implementation level, providing fertile ground for execution of the new European policy frameworks that supports quadruple helix approaches to innovation. Smart specialization strategies (RIS3) encompass such initiatives, placing ICT and collaboration between academia, industry, government, and citizen at the center of urban innovation. However, there is still lack of research on effects of such approaches to innovation, involving both quadruple helix clusters and ICT in utilizing innovation potentials for developing smart cities. This study aims to increase the understanding on how quadruple helix urban innovation strengthens competitiveness of regions by improving its local smart areas – RIS3. We identified smart specialization patterns and applied comparative benchmark between nine smallmedium sized urban regions in Central Europe. Building on these results, the study provides an overview of the effects of RIS3 strategies implemented through quadruple helix innovation clusters on competitiveness of regions and Smart City development.
Progress in integrated photonics enables development of integrated photonics circuits with new unique properties, circuits of the future, and overcomes current limits in information and communication technologies. The packaging of photonic integrated circuits is necessary for taking them out of research laboratories into real implementation in the information and communication technology applications.
Telecom optical fibers are still being the best transmission medium of digital data and analogue signals for long distance applications. The effective coupling of optical radiation between telecom optical fiber with ten microns core dimension and photonic integrated circuits optical waveguides with submicron dimensions are necessary. To address these challenges, we present our concept of photonics integrated circuit packaging with radio frequency, direct current and fiber array ports with automated active alignment system.
Concept of probabilistic modeling for real-time prediction of product quality and design automation
(2018)
Continuous monitoring of interactive exhibits in museums as part of a persuasive design approach
(2021)
Im vorliegenden Paper wird ein Vergleich zwischen Produktions-und Simulationsdaten präsentiert welches im Rahmen einer größeren Initiative zur Verwendung von Shopfloor Daten bei einem Projektpartner in der Automobilindustrie umgesetzt wurde. In diesem Projekt wurden die Daten die während der Füllbildsimulation entstehen mit den Daten aus der finalen Werkzeugabnahme verglichen um zu analysieren, wie genau diese miteinander über einstimmen. Je besser die Simulation ist, desto schneller kann der gesamte Werkzeugentwicklungsprozess abgewickelt werden, welcher als Kernprozess massives Einsparungspotenzial und damit Wettbewerbsvorteil mit sich bringt.
Design and simulation of 128-channel 10 GHz AWG for ultra-dense wavelength division multiplexing
(2012)
Design, simulation, and optimization of the 1×4 optical three-dimensional multimode interference splitter using IP-Dip polymer as a core and polydimethylsiloxane (PDMS) Sylgard 184 as a cladding is demonstrated. The splitter was simulated by using beam propagation method in BeamPROP simulation module of RSoft photonic tool and optimized for an operating wavelength of 1.55 μm . According to the minimum insertion loss, the dimensions of the splitter were optimized for a waveguide with a core size of 4×4 μm2 . The objective of the study is to create the design for fabrication by three-dimensional direct laser writing optical lithography.
Design, simulation, and optimization of the 1×4 optical three-dimensional multimode interference splitter using IP-Dip polymer as a core and polydimethylsiloxane (PDMS) Sylgard 184 as a cladding is demonstrated. The splitter was simulated by using beam propagation method in BeamPROP simulation module of RSoft photonic tool and optimized for an operating wavelength of 1.55 μm . According to the minimum insertion loss, the dimensions of the splitter were optimized for a waveguide with a core size of 4×4 μm2 . The objective of the study is to create the design for fabrication by three-dimensional direct laser writing optical lithography.
SiN is a suitable material for fabricating of photonic integrated circuits with middle refractive index contrast for the visible and near infrared spectral region with ultra-low propagation losses. The paper deals with the design and simulation of fiber to SiN chip butt coupler with single step fabrication process without thickness tapering. Coupler is designed for 850 nm band for coupling between strip 0.25 μm × 1.00 μm waveguide and Nufern's 780-OCT single mode optical fiber with core diameter 4.4 μm. The coupling losses simulation results of the two simulation methods finite-difference beam propagation techniques and eigenmode expansion method are compared.