Refine
Document Type
- Master's Thesis (113)
- Article (9)
- Preprint (5)
- Conference Proceeding (1)
Institute
Language
- English (128) (remove)
Is part of the Bibliography
- no (128) (remove)
Keywords
- leadership (4)
- Machine learning (3)
- Sustainability (3)
- Switzerland (3)
- Artificial intelligence (2)
- Change management (2)
- Culture (2)
- Discrimination (2)
- International business (2)
- Leadership (2)
Modern portable electronic devices have seen component heat load increasing, while the space available for heat dissipation has decreased. This requires the thermal management system to be optimized to attain the high performance heat sink. Heat sinks plays a major role for dissipating heat in electronic devices. Phase change material (PCM) is used to enhance the heat dissipation in heat sink. This paper reports the results of an experimental investigation of the performance of Pin fin heat sinks filled with phase change materials for thermal management of electronic devices. The experimental set ups are prepared with the graphical programming language with Lab VIEW (Laboratory Virtual Instruments for Engineering Workbench. Three different types of Pin fin Heat sink with and without PCM are investigated based on different operational timings and the temperature is acquired with the help of Data Acquisition Card (DAQ). The results indicated that the inclusion of the PCM could stabilize the temperature for a longer period and reduce the heating rates and peak temperatures of heat sink with increasing the number of fins can enhance the thermal performance of electronic devices.
This paper presents a project developed at the K.S.Rangasamy College of Technology (Tamilnadu,India) aimed at designing, implementing, and testing an autonomous multipurpose vehicle with safe, efficient, and economic operation. This autonomous vehicle moves through the crop lines of a Agricultural land and performs tasks that are tedious and/or hazardous to the farmers. First, it has been equipped for spraying, but other configurations have also been designed, such as: a seeding ,plug platform to reach the top part of the plants to perform different tasks (pruning, harvesting, etc.), and a trailer to transport the fruits, plants, and crop waste.
The master thesis concentrates on two different cases to generate energy from MSW. In the first case, the MSW is incinerated in an incineration plant. This approach represents the present situation in the waste treatment in large parts of the UK.
In the second case, the OFMSW is separated in a treatment facility and used in a fermentation plant. The remaining waste is again used as a feedstock in an incineration plant. The difference in the net energy yield between these two cases is investigated in this thesis.
To calculate the difference in the energy yield of case 1 and case 2, a research of the existing literature about comparisons of incineration and fermentation plants and their results are reflected and data about the MSW in the UK is collected. With the input of the literature and the researched data, a model is built which compares the two different cases of waste treatment. The results of the comparisons are then examined by varying different parameters. This step is repeated by using different input parameters. Afterwards, the results are compared and analysed.
In the next part of the thesis, an economic analysis of the incineration and fermentation combined technology plant is made. In this analysis, the investment costs, the annual profits and the annual costs of an additional fermentation plant are discussed and calculated. The result of the analysis is displayed as an amortization time calculation. The results are then analysed by varying the parameters in a sensitivity analysis.
Finally, the research question is answered and a forecast for possible plant designs with an incineration and a fermentation plant in combination are discussed.
In the residential construction industry, the focus on energy efficiency and cost effectiveness has been gaining importance. In order to achieve these contradicting objectives, a shift towards a reduced complexity in building practices can be observed.
Within the HVAC sector, the Tempering method for space heating has received particular attention as an alternative way to heat museums and buildings worthy of preservation.
In spite of the simplified design, this space heating system is claimed to offer significant advantages in its present field of application.
This study evaluates the implementation of Tempering in the residential context. So far, there is no scientific research on the implementation of Tempering in energy efficient-dwellings.
This master thesis provides initial results on achievable heat flux values, the impact on heat generation efficiency, the inherent installation costs as well as the particular
consequences in terms of end energy consumption of the building as a whole. The findings are compared to the individual performances of well-established heat emission approaches.
By means of a numerical analysis and a case study on a real-case single-family home, it is found that the heat flux values of Tempering systems suffice for the implementation within buildings, which comply with the low-energy building standard. Comparing radiant walls, radiant floors and radiators, the inherent installation costs are lowest for Tempering and radiant floors. The impact on the end energy consumption depends largely on the utilised heat generation system. With a gas-condensing boiler, Tempering performs equal to the radiant systems. When a ground source heat pump system is installed, however, Tempering performs poorly and accounts for a significantly increased energy consumption. Radiator systems are found to be the most energy-efficient method for space heating in both cases.
In times of global climate change, it is increasingly important to investigate emissions and resource consumption of all machines and, if possible, to improve them. This includes within the transport sector car ferries.
In order to reduce the environmental impacts of car ferries, the electrification has penetrated into this sector, which has led to the world's first fully electric car ferry. One of the most important components to operate this ferry is the energy storage. Not only the battery storage of the ferry itself is needed, but also an onshore battery storage system is needed to support the electrical grid.
The present study examines how storage technologies and concepts can impact the environment considering the world's first all-electric car ferry, MF Ampere, which operates in Norway.
To examine this, the current onshore battery storage system is compared to a concrete sphere storage system. For this purpose, data from the first test run of this new storage technology, which was successfully carried out by the Fraunhofer Institute in 2016, is considered. Subsequently, a life cycle assessment of the two storage systems is carried out to compare the environmental impacts.
The concrete sphere storage system performs better for 15 of 17 impact categories compared to the existing onshore battery storage system. Depending on the impact category the impact reduction is about 2% to 8%.
Nevertheless, it is difficult to estimate how long the useful life and how good the efficiency of the concrete ball storage will be, since no system of this size has been tested yet. Also, the costs of the concrete sphere storage system have not been considered.
In this thesis the effect of dc voltage bias on the equivalent series resistance (ESR) of capacitors and especially ferroelectric dielectric ceramic capacitors (FDCC) is analysed. Further the influence of the dc biased ESR on the losses of capacitors is investigated. Also piezoelectric resonances (PR) occurring in FDCCs with applied dc bias and their influence on the losses are analysed.
Therefore a measurement circuit to measure the impedance and thus the ESR of capacitors in combination with a vector network analyser (VNA) is developed. Using the developed circuit the ESR of capacitors of different technologies is measured and their behaviour with dc bias is evaluated. The losses of an FDCC are measured in a power electronic (PE) circuit with a developed calorimetric measurement system (CMS). The influence of the PR is investigated by tuning the switching frequency of the PE system and thus the frequency of the capacitor current exactly into the PR. The measured losses are then compared to a calculation based on the capacitor current harmonics and the respective ESR.
The measurements show an increase of the ESR with dc bias for all measured FDCCs. The loss measurements show a significant increase of the losses in an FDCC if the current frequency matches the PR frequency. Consequently a decrease of the PE system's efficiency is measured. The loss calculations do not exactly match the measurements but there is a systematic deviation of the same order for all measurements.
Cultural Due Diligence
(2020)
Much research has been conducted in recent years to discover the reasons for the high failure rate of M&As, whereas one frequently cited reason is the incompatibility of the corporate cultures. In order to minimize this risk and to be able to react to these differences already at an early stage, Cultural Due Diligence offers itself as part of the due diligence process. Unlike existing, more general research, I emphasize the cultural challenges companies face when investing transnationally with this thesis. Using the results of a single case study with inductive character, I answer the question how to conduct Cultural Due Diligence in cross-border M&As and propose an appropriate model. The findings reveal that especially in cross-border M&As, cultural incompatibility poses a risk for failure. I was able to find out that companies that seek to grow internationally with M&As deal with similar issues in terms of corporate culture as pointed out in existing Cultural Due Diligence methods. The present study, however, shows that national culture has a great influence on corporate culture, which is why it is essential to include it in the cultural assessment in cross-border acquisitions. This provides information about why there are differences, besides the fact that they exist. Only this understanding puts a company in the appropriate starting position to recognize differences, understand them, assess whether these differ-ences are acceptable, as well as to develop appropriate strategies to address them in the integration phase.
This master thesis investigates a Computational Intelligence-based method for solving PDEs. The proposed strategy formulates the residual of a PDE as a fitness function. The solution is approximated by a finite sum of Gauss kernels. An appropriate optimisation technique, in this case JADE, is deployed that searches for the best fitting parameters for these kernels. This field is fairly young, a comprehensive literature research reveals several past papers that investigate similar techniques.
To evaluate the performance of the solver, a comprehensive testbed is defined. It consists of 11 different Poisson equations. The solving time, the memory consumption and the approximation quality are compared to the state of the art open-source Finite Element solver NGSolve. The first experiment tests a serial JADE. The results are not as good as comparable work in the literature. Further, a strange behaviour is observed, where the fitness and the quality do not match. The second experiment implements a parallel JADE, which allows to make use of parallel hardware. This significantly speeds up the solving time. The third experiment implements a parallel JADE with adaptive kernels. It starts with one kernel and introduce more kernels along the solving process. A significant improvement is observed on one PDE, that is purposely built to be solvable. On all other testbed PDEs the quality-difference is not conclusive. The last experiment investigates the discrepancy between the fitness and the quality. Therefore, a new kernel is defined. This kernel inherits all features of the Gauss kernel and extends it with a sine function. As a result, the observed inconsistency between fitness and quality is mitigated.
The thesis closes with a proposal for further investigations. The concepts here should be reconsidered by using better performing optimisation algorithms from the literature, like CMA-ES. Beyond that, an adaptive scheme for the collocation points could be tested. Finally, the fitness function should be further examined.
Companies develop and implement strategies with the aim to address the needs of their customers. Acquisition is one market expansion strategy that companies can use to acquire new market access, technologies and/or to grow organically. In recent years, Chinese companies have been active in acquiring companies all over the globe to develop their strategic position. This caused certain contra reaction in Europe and as well in the Swiss media against cross-border acquisitions of Swiss companies.
Swiss companies and particularly the Swiss-MEM (Machinery, Electrical and Mechanical) industry is highly export oriented and their value proposition builds on attributes like knowledge, technology, and differentiating products. Among them are many “hidden champions” and niche players who successfully dominate the market segment.
As observed with Chinese companies, Indian companies also started to become more active outside of their domestic markets by increasing their foreign direct investments into Europe, Asia and North America, over the last decades. The lasting and good relationship of India and Switzerland might trigger the wish for Indian companies to acquire Swiss and particularly Swiss-MEM companies for acquisitions.
This Master’s Thesis assesses how often Indian investments into public and privately owned Swiss-MEM companies by acquisition happen, how are the attempts of acquisitions perceived by the stakeholders and what measures Swiss and Swiss-MEM companies can take, to protect themselves from being acquired. To access the research topic, several sub-questions will be analysed with the aid of primary and secondary research to assess the situation.
The research topic is of particular interested to the author since he spent over 20 years working in the Swiss-MEM industry, involved in international affairs and in recent years specifically with India. The observation of Chinese acquisition activities and insight into the size and potential of India were the drivers for researching whether India might follow China’s example.
In conclusion, Indian companies are not explicitly targeting Swiss and Swiss-MEM companies, but there are reasons to believe that it would make sense for Indian companies to look into the acquisition of Swiss and Swiss-MEM companies. The perception of such acquisitions varies, but there are arguments for and against them. Companies must take strategic and organisational measures in order to prevent themselves from becoming the target of an acquisition. However, it is known that the state should not interfere in the market and a discussion at a political level, planning how to deal with cross-border acquisition, is needed.
Further areas for research based on this Master’s Thesis could be the review of how the targeting of Swiss and Swiss-MEM companies by Indian companies would look, and also the topic of the succession planning in Swiss secondary sector in conjunction with Indian targeting for acquisitions. A third area to research might be investigating the political aspects involved in the research questions.
Many test drives are carried out in the automotive environment. During these test drives many signals are recorded. The task of the test engineers is to find certain patterns (e.g. an emergency stop) in these long time series. Finding these interesting patterns is currently done with rule based processing. This procedure is very time consuming and requires a test engineer with expertise. In this thesis it is examined if the emerging field of machine learning can be used to support the engineers in this task. Active Learning, a subarea of machine learning, is used to train a classifier during the labeling process. Thereby it proposes similar windows to the already labeled ones. This saves the annotator time for searching or formulating rules for the problem. A data generator is worked out to replace the missing labeled data for tests. The custom performance measure “proportion of seen samples” is developed to make the success measurable. A modular software architecture is designed. With that, several combinations of Time Series Classification algorithms and query strategies are compared on artificial data. The results are verified on real datasets, which are open source available. The best performing, but computational intensive solution is an adapted RandOm Convolutional KErnel Transform (ROCKET). The custom query strategy “certainty sampling” shows the best results for highly imbalanced datasets.
The purpose of this work is to explore implicit schemes underlying the market segmentation analysis process. Boosting transparency for and in the new discipline of healthcare marketing, the work offers a toolbox of both primary and secondary methods to identify the accurate target market. This is crucial, since resource allocation in B2C segmentation and targeting is still often misleading. An Austrian, internationally present niche player serves as a research object to turn theoretical insights into practical verification. Data for the thesis are collected through company-internal data analysis and desk research, grounded in a multi-method approach with primary and secondary research. On the one hand, the work assesses the most effective segmentation and attractiveness/knock-out criteria according to scientific sources. Delving into the topic of a priori and a posteriori segmentation, an overview of suitable techniques is going to be offered. On the other hand, the thesis illustrates how the accurate target segment in the healthcare industry can be evaluated and determined through companyinternal consumer and market data.
Primary research on demographics (age, gender), psychographics (preferred channels), behavioral criteria (new/existing, CLC) and product categories is found to be particularly meaningful for the healthcare player. Results vary between countries, which is why an international-marketing strategy instead of a domestic-marketing approach is advisable.
Secondary research shows that socio-demographic and behavioral criteria are most used as a priori criteria, whereas a posteriori segmentation is promising to reveal psychographic clusters. One of the author’s recommendations is to niche down accurate market segments such as LOHAS or “best agers” by refining psychographics/socio-demographics with behavioral segmentation through “occasions” (e.g. back pain, depression, injuries). Novel approaches such as outcome-based segmentation or emphasizing “promoters” are discussed too.
The findings pave marketing managers the way for identifying the accurate target segments in the B2C health industry, selecting accurate methods grounded in profound scientific research and with concepts suitable for SMEs. The thesis proves that marketing segmentation is no longer a “nice-to-have” but a “must” in the health(care) industry.
Throughout history, a variety of influences have changed the way we sell our products. Starting with the Industrial Revolution up to the first saturation phase in the 1970s. The question now arises as to whether the heating industry is currently back on an evolutionary development path with the increasing digitalisation of distribution. How the sales process in the B2B sector will change with increasing digitalisation and what effects this will have on sales personnel is only documented by a few sources which do not allow any conclusions to be drawn about the craft or even the heating industry. This results in a research gap which is to be closed in the context of this thesis. The aim of this research project is to find out the effects of a further digitalisation of the sales process on the sales force in the defined environment of the heating industry in Central Europe. For this purpose the following research questions are asked: Which steps in the sales process in the heating industry in Central Europe should be digitalised? How will the digitalisation of the sales process affect the sales force in the heating industry in Central Europe? A case study, according to Yin was chosen as the research method. The data were collected by means of in-depth interviews and analysed qualitatively, according to Mayring. The increasing digitalisation will have a large effect on the sales force, tasks will disappear, new tasks will be added and new ones will replace conventional working methods. In summary, automation will simply make tasks superfluous, software tools will improve quality and increase efficiency, and personal selling will become a premium skill. Companies will try to automate as many backoffice activities as possible and reduce the number of office staff if necessary.
The present research had compared how Uppsala and Bartlett & Ghoshal (B&G) models explain the internationalization process of the Brazilian pulp producer Fibria.
The Uppsala model describes the developments of capabilities that enable the firm to move towards higher commitments abroad. Despite its sine-qua-non dependence on foreign markets, it is unlikely that Fibria will internationalize its production to another country, given the country-specific advantages that the company has in Brazil. Nevertheless, Fibria set its structure abroad even when the direct exports would suffice to reach the markets without any foreign direct investment.
B&G deals with the aspects of the organizational structure and described the Transnational type as the evolution of the international firm. In their typology, Fibria was a Global and Ethnocentric type, but interestingly, elements of Transnational and Geocentric models were also observed in the company.
Both theories overlap or complement each other in many aspects. However, they could not explain the peculiarities of the internationalization of Fibria. One reason is the lack of country-related elements in these models.
Eventually, comparisons between theories such as those presented enable decision-makers to align the corporate strategy using suitable models, bearing in mind the limitations that each method entails.
Nowadays, the area of customer management strives for omni-channel and state-of-the-art CRM concepts including Artificial Intelligence and the approach of Customer Experience. As a result, modern CRM solutions are essential tools for supporting customer processes in Marketing, Sales and Service. AI-driven CRM accelerates sales cycles, improves lead generation and qualification, and enables highly personalized marketing. The focus of this thesis is to present the basics of Customer Relationship Management, to show the latest Gartner insights about CRM and CX, and to demonstrate an AI Business Framework, which introduces AI use cases that are used as a basis for the expert interviews conducted in an international B2B company. AI will transform CX through a better understanding of customer behavior. The following research questions are answered in this thesis: In which AI use cases can Sales and CRM be improved? How can Customer Experience be improved with AI-driven CRM?
Sustainable distribution
(2020)
This master thesis gives an insight into the topic of sustainability in the banking industry and focuses on distribution. In the first part of the thesis, the terms and concepts of sustainability and sustainable distribution are being explained and existing methods for measuring sustainability are presented on the basis of an extensive literature research.
Subsequently, the banking industry is introduced, the distribution of financial services is explained, and the specifics of sustainable distribution in the banking industry are elaborated.
An empirical study in form of expert interviews was used to show to what extent sustainability currently plays or will play a role in the banking sector. For this purpose, experts from six banks were interviewed.
In the final part of the paper, the hypotheses formulated at the beginning of the paper as well as additional questions are examined or answered and a model for evaluating the effects of selected distribution channels on ecological and social sustainability is being presented.
Graphite substrates underwent two methods of creating doped silicon carbide films via carbothermal reduction; the first method being liquid-phase processing, or dip-coating, and the second gas-phase processing, otherwise referred to as the solid-vapour reaction. The dip-coating procedure resulted in flaky coatings, while the solid-vapour reaction resulted in polycrystalline films with columnar growth that displayed promising morphological and electrical properties. The films were tested on their performance as semiconductor diodes, and proved that carbothermal reduction in the gas phase is a promising technique for creating polycrystalline silicon carbide films for the application of light-emitting diodes.
In recent years, much research has been done on medical laser applications inside the human body, as they are minimally invasive and therefore have fewer side effects and are less expensive than conventional therapies. In order to bring the laser light into the human body, a glass fibre with a diffuser is needed. The goal of this master thesis is the characterization and production of fibre optic diffusers that can be used for the three therapeutic applications: photodynamic therapy, laser-induced thermotherapy and endovenous laser therapy. For this purpose the following goals have to be achieved:
- Optimization of the efficiency and homogeneity of internally structured diffusers
- Examine damage thresholds of the diffusers in the tissue using a crash test
- Achieving a better understanding of the decouple mechanism with a simulation
Using an ultra-short pulse laser, modifications could be introduced into the fibre in this way that the radiation profile is homogeneous and the decoupling efficiency is 68.3 %. It was discovered that the radiation profile depends on the wavelength. Attempts have been made to improve the decoupling efficiency by mirroring the distal end of the fibre. The mirror reflects the remaining light back into the fibre, so that it is also decoupled lateral on the modifications. Vapor-deposited aluminum with physical vapor deposition is a promising approach. However, the adhesion of the coating must be improved or the coating must be protected by a mechanical cover, otherwise it will flake off too quickly.
In a crash test, it was shown that the glass fibre diffusers can withstand 20 W laser power for 300 s without visible change. In an ex vivo test, the coagulation zone in the tissue was examined and it was showed that the diffusers radiate radially homogeneously. Using a ray trace simulation, the course of the light rays in the fibre was examined and the correlation of modification width and length with the decoupling efficiency was investigated. It was discovered that there are helical light rays in the fibre, which cannot be decoupled by modifications in the fibre centre.
Although pilot projects are an accepted means of entry into prospects, research on the object of startups selling SaaS and use pilots to enter and to further scale within their prospect’s organization is limited. The reader can expect a collection of key practices of SaaS startups in the field of Decision Support Software. These combine the main sales-oriented elements within pilot projects that are reflected on by Customer Success Management, Change Management as well as cultural dimensions. Explorative interviews, mainly with stakeholders in Decision Support Software startups, were conducted to further gain an understanding of the research object. Results indicate that pilots are strategically used in the sales of such startups to simultaneously deal with their customer’s uncertainties and as a means for the startups to get commitment and increase their value proposition through the additional service that they offer in order to acquire an internal support basis. Customer Success Management as well as Change Management are furthermore advantageous in quickly achieving measurable results that leverage buyers and seller’s justification for further sales.
Zeros can cause many issues in data analysis and dealing with them requires specialized procedures. We differentiate between rounded zeros, structural zeros and missing values. Rounded zeros occur when the true value of a variable is hidden because of a detection limit in whatever mechanism was used to acquire the data. Structural zeros are values which are truly zero, often coming about due to a hidden mechanism separate from the one which generates values greater than 0. Missing values are values that are completely missing for unknown or known reasons. This thesis outlines various methods for dealing with different kinds of zeros in different contexts. Many of these methods are very specific in their ideal usecase. They are separated based on which kind of zero they are intended for and if they are better suited for compositional or for standard data.
For rounded zeros we impute the zeros with an estimated value below the detection limit. The author describes multiplicative replacement, a simple procedure that imputes values at a fixed fraction of the detection limit. As a more advanced technique, the author describes Kaplan Meier smoothing spline replacement, which interpolates a spline on a Kaplan Meier curve and uses the spline below the detection limit to impute values in a more natural distribution. Rounded zeros cannot be imputed with the same techniques that would be used for regular missing values, since there is more information available on the true value of a rounded zero than there would be for a regular missing value.
Structural zeros cannot be imputed since they are a true zero. Imputing them would falsify their values and produce a value where there should be none. Because of this, we apply modelling techniques that can work around structural zeros and incorporate them. For standard data, the zero inflated Poisson model is presented. This model utilizes a mixture of a logistic and a Poisson distribution to accurately model data with a large amount of structural zeros. While the Poisson distribution is only applicable to count data, the zero inflation concept can be applied to different kinds of distributions. For compositional data, the zero adjusted Dirichlet model is introduced. This model mixes Dirichlet distributions for every pattern of zeros found within the data. Non-algorithmic techniques to reduce the amount of structural zeros present are also shown. These techniques being amalgamation, which combines columns with structural zeros into more broad descriptors and classification, which changes columns into categorical values based on a structural zero being present or not.
Missing values are values that are completely missing for various known or unknown reasons. Different imputation techniques are introduced. For standard data, MissForest imputation is introduced, which utilizes a RandomForest regression to impute mixed type missing values. Another imputation technique shown utilizes both a genetic algorithm and a neural network to impute values based on the genetic algorithm minimizing the error of an autoencoder neural network. In the case of compositional data, knn imputation is presented, which utilizes the knn concept also found in knn clustering to impute the values based on the closest samples with a value available.
All of these methods are explained and demonstrated to give readers a guide to finding the suitable methods to use in different scenarios.
The thesis also provides a general guide on dealing with zeros in data, with decision flowcharts and more detailed descriptions for both compositional and standard data being presented. General tips on getting better results when zeros are involved are also given and explained. This general guide was then applied to a dataset to show it in action.
Digitalisation poses great challenges for regional tourism management. However, many organisations are currently undergoing a transformation from a marketing to a destination management organisation (DMO), which is why only a few have managed to adopt new digital approaches and to assert themselves as DMOs within the destination and against ever growing global platforms.
The presented master thesis therefore deals with this issue and aims to pave the way for DMOs to develop and use digital business models themselves.
The objective of the thesis is to develop a systematic process for the development of own DMO business models and to evaluate whether the establishment of a multi-sided platform as the recipe for the success of global platform providers is also suitable for DMOs. For this purpose, an extensive literature research was conducted and semi-structured expert interviews were evaluated. In addition, the Anchor Point Canvas was developed as a supporting framework for the modelling of business models for companies with historically grown structures and constraints.
This thesis aims to support the product development process. Therefore, an approach is developed, implemented as a prototype and evaluated, for automated solution space exploration of formally predefined design automation tasks holding the product knowledge of engineers. For this reason, a classification of product development tasks related to the representation of the mathematical model is evaluated based on the parameters defined in this thesis. In a second step, the mathematical model should be solved. A Solver is identified able to handle the given problem class.
Due to the context of this work, System Modelling Language (SysML) is chosen for the product knowledge formalisation. In the next step the given SysML model has to be translated into an object-oriented model. This translation is implemented by extracting information of a ".xml"-file using the XML Metadata Interchanging (XMI) standard. The information contained in the file is structured using the Unified Modelling Language (UML) profile for SysML. Afterwards a mathematical model in MiniZinc language is generated. MiniZinc is a mathematical modelling language interpretable by many different Solvers. The generated mathematical model is classified related to the Variable Type and Linearity of the Constraints and Objective of the generated mathematical model. The output is stored in a ".txt"-file.
To evaluate the functionality of the prototype, time consumption of the different performed procedures is measured. This data shows that models containing Continuous Variables need a longer time to be classified and optimised. Another observation shows that the transformation into an object-oriented model and the translation of this model into a mathematical representation are dependent on the number of SysML model elements. Using MiniZinc resulted in the restriction that models which use non-linear functions and Boolean Expressions cannot be solved. This is because the implementation of non-linear Solvers at MiniZinc is still in the development phase. An investigation of the optimally of the results, provided by the Solvers, was left for further work.
Increasing international competition and accelerated technological change characterize the environment in which companies must maintain and, if possible, expand their competitive advantage. In this context, the new, popular keyword innovation management is often mentioned. Many corporations propagate and use it for marketing purposes. As a result, the companies have to evaluate, develop and launch innovations increasingly faster, which poses great challenges for many and requires a high degree of adaptability.
This master thesis analyzes innovation management (IM) in the automotive industry and in other industries (material manufacturers, service providers, medicine, ...) depending on the number of employees and turnover. In addition, the maturity levels of the IMs and the innovation management systems (IMS) are examined. It also tries to determine which design or "building blocks" are necessary for a successful innovation management. Furthermore, factual and monetary guidelines by the management are evaluated. The thesis also aims to find out how the success of IM is measured. Therefore, guideline-based expert interviews were conducted with responsible people from the innovation departments and then systematically analyzed.
In the literature, expenses for innovations are often wrongly equated with the R&D rate. In this master thesis, it could be shown that this ratio is highest in the automotive industry. However, it does not correlate with the number of employees, turnover, maturity level, success or design of the IM. Furthermore, it could be shown that larger companies have a higher degree of maturity. The reason for this is that more people are usually involved in innovation and that a holistic understanding of innovation is better anchored in large corporations. When designing the IM or the roles of the innovation department, large companies use several different types. While the IM departments in small and medium-sized companies are usually incubators and accelerators, large companies also use corporate venture capital to support start-ups and develop new business models. In this thesis, the success of IM was determined by the number of innovations implemented in customer projects. It was found that, regardless of the size of the company, a higher degree of maturity of the IM and the accelerator role seem to have a positive influence.
Unfortunately, there are rarely concrete goals and targets set by the management although these, along with a holistic understanding of innovation in the company, are without doubt the most important part of a successful innovation management.
Influencer Marketing has been discussed by various marketing experts for years and is already a fixed component of the marketing strategy in many companies. These are mainly companies from the B2C sector. Recently, more and more companies are asking themselves about possible areas of application within the B2B structure. This phenomenon is influenced by the increase in digitalization and the ever-higher hurdles in reaching target groups using traditional marketing tools.
The topic of this master’s thesis was the result of professional and personal development. Various modules attended during the study inspired a deeper interest in the subject. Furthermore, the topic was always a point of discussion in the professional environment, resulting in the realisation that there is currently very little knowledge in B2B companies regarding Influencer Marketing.
The aim of the research was to discover how to systematically find end users for the use of Influencer Marketing in B2B companies in the tool and hardware industry. Furthermore, the success factors for a long-term cooperation between influencers and companies from this industry will be identified and presented.
Research questions were created in order to realise the above-mentioned objectives. Therefore, the primary research question and three sub-research questions were created for both the theoretical and empirical part of the work. To answer these questions, eight experts from B2B companies in the tool and hardware industry were interviewed. The evaluation was based on the qualitative content analysis according to Mayring.
From the research results, a possible selection procedure could be identified, which would enable companies to systematically select influencers for marketing purposes. Furthermore, success criteria for a long-term cooperation between influencers and companies were also identified.
Moving from one country to another, from one cultural context to a different one comes with many challenges and problems. The expatriate adjustment process, in general, has been evaluated extensively in the literature. Little is known if the knowledge in the literature is also valid for the situation of expatriates in rural Vorarlberg. In this paper was examined, which are the most common problems for highly skilled immigrants that are moving to Vorarlberg. In a mixed-method approach, information was gathered with an online questionnaire whose results served as a basis for a series of semi-structured interviews. In addition, an expert talk with a local relocation consultant was conducted. It was found that by far, the most severe difficulty is based on the domestic language situation. An expatriate needs to talk and understand German, but the local language is an Alemannic subsection of the German language that is not easy to understand. Additional difficulties that cause culture shock are limited opening hours, mobility troubles, and several others. The awareness about the composing of these problems might help to find the appropriate measures to support expatriates to come in the future.
A novel calorimetric technique for the analysis of gas-releasing endothermic dissociation reactions
(2020)
The humidification dehumidification (HDH) cycle is a process for thermal water treatment. Many studies were carried out investigating operation of an HDH cycle with water and seawater as working liquid. Currently research into other areas of application is limited. Exchanging the working liquid in the humidifier from seawater to a water oil emulsion and investigating its behavioural changes is the basis for the expansion into applications such as bilge water treatment. This master’s thesis covers analysis of the behaviour of an HDH cycle operated with a water oil emulsion. The main elements are (1) proof of concept for operation of the HDH cycle with a water oil emulsion, (2) comparison of measurements and thermodynamic calculations, (3) investigation of the impact of operating parameters and (4) optical analysis of the bubbly flow in water and oil.
Operation of the HDH cycle using water oil emulsion was shown to be feasible with a small change to the setup previously used for investigations with seawater as working liquid. To keep the emulsion from separating into its individual parts, constant movement of the working liquid needs to be ensured. For this a magnetic stirrer was introduced into the bubble column humidifier (BCH) used. In a batch process an oil concentration of >97 % was reached without visible traces of oil in the produced condensate.
Comparison of the measured and thermodynamically evaluated productivity shows that measured productivity is higher. The proposed explanation for this is supersaturation of air at the BCH exit. Further investigation into this phenomenon is needed to confirm this hypothesis.
Influential parameters investigated are (1) liquid temperature, (2) superficial air velocity and (3) sieve plate orifice diameter. Increase of liquid temperature results in an exponential increase in productivity. At superficial air velocities up to 3 cm/s productivity increases with superficial air velocity. For superficial air velocities higher than 3 cm/s productivity plateaus. At low superficial air velocity, an increase of sieve plate orifice diameter results in increasing productivity. Further increase of the sieve plate orifice diameter inverses this phenomenon.
Bubbly flow in water and oil is influenced by the different viscosities of the liquids. Water creates small bubbles of similar size at low superficial air velocities. At superficial air velocities >2 cm/s turbulences start to increase and finely dispersed bubbles are present in the water. Bubbly flow in oil creates larger bubbles at all superficial air velocities. The airflow transitions to plug flow at velocities of 3 cm/s and above.
Result from this master’s thesis can be used for as a basis to broaden the understanding of the HDH cycle and find new areas of applications.
Integration of an industrial robot manipulator in ROS to enhance its spatial perception capabilities
(2020)
Robots without any external sensors are not capable of sensing their environment, often leading to damaging collisions. These collisions could potentially be avoided if the robot had a way to sense its environment in the first place. This thesis attempts to tackle this problem by equipping such a robot with extra sensor hardware for perceiving environmental objects. The robot used within this thesis is a KUKA LBR iiwa 7 R800. The goal is a robot capable of moving in an unseen environment without colliding with obstacles nearby.
The research covers different sensor options, robots in cramped areas as well as algorithms and simulation topics. Software platforms and libraries used for the implementation are briefly introduced.
Multiple infrared sensors are directly installed onto the robot manipulator. The extra sensors and the robot are integrated into the ROS middleware to create an application capable of sensing the robots’ environment and plan collision-free paths accordingly.
The experiments show, that the low amount of available sensor data can not map the robots’ environment with enough detail. Additional problems, such as sensor noise corrupting parts of the generated map or the robot recognizing itself as an obstacle, lead to a negative result in total. In future work, the choice of sensors shall be reconsidered and tested upfront via simulation software.
This master thesis investigates effective leadership behaviour of multicultural teams during change management. Multicultural teams can be highly effective in dealing with complex change processes and can represent a key player to tackle today’s VUCA-world challenges.
Effectiveness of multicultural teams during change depends critically on leadership with a range of specific behaviours. Involvement and support of the employees in a coaching role is key. Leaders need to display behaviours such as continuous development of cultural and emotional intelligence, critical self-reflection, open-mindedness, and readiness to serve as authentic role models. Furthermore, the creation of a sense of unity based on good communication and common sense is essential to build multicultural teams, and to enable them to embrace their differences as opportunity. Trust, transparency and a holistic change process are vital. Effectiveness essentially depends on the following factors: the organization’s culture, the characteristics of the employees and of their leader, and on the external environment. Leaders should take these factors into consideration at all times.
This research seeks to explore the cultural impact in the development of a new product, and if operational CRM (CRM technologies) can bring these two concepts together. As an industrial designer, the researcher finds it fascinating to explore how the abilities that a designer uses can help to solve users' problems could be implemented into structural or strategic decision-making of a company. Therefore, the researcher believes that the results might bring value to the head of international teams in charge of Product Development, by bringing some ideas for what is essential to consider in these processes and how CRM could become a relevant tool to satisfy customers and users.
This research generates value to international management and leadership studies because it brings the management of new product development from an organizational point of view within an international context to the forefront. It also builds an understanding of what to consider when the value chain is decentralized and involves international collaboration in product development processes. And positive elements and/or problems that may arise concerning culture and the role of the CRM within this process.
For centuries, companies and institutions are working on the development of organisational project maturity models. The purpose of these models is to develop a path for improving an organisation’s capability of managing projects. Projects are the means by which companies implement their strategic objectives. Trends like globalisation and advances in IT lead to more geographically distributed teamwork. Therefore, this thesis gives a comprehensive answer to how project management maturity models address transnational project management.
For accomplishing the research objective, this thesis follows an integrated, qualitative literature review approach. Theoretical frameworks and applied research on project management maturity assessments were systematically collected and analysed. The results extracted from these two sources were synthesised to extract findings.
The main research result shows that models continuously adapt to transnational project management. They are doing this by aligning the organisational culture and values, focusing on organisational wide learning and gradually embedding behavioural and intercultural competencies. Maturity assessments need to follow this trend.
Furthermore, transnational convergence of the models’ dimensions was observed. This development leads to growth in size and complexity. To apply them internationally, the models should be simplified or easily adapted to specific countries and cultures.
The workplaces are changing with the increase in the use of technology, digital communication, the shift towards multicultural teams, and remote work due to COVID-19. Leaders need more collaboration and acceptance of digital communication tools such as Teams, Slack. This study aims to determine the influence of culture in the acceptance of digital tools in leadership communication. In the literature review, 3 cultures (organizational, national, Individual) were assumed. And Individual culture was tested using Schwartz (openness to change) value survey along with other qualitative questions in 1-1 interviews of Austrians and multinationals living in Austria. Analysis from findings suggests that culture plays an important role in technology acceptance of digital tools in leadership communication. This was confirmed by the Schein model and Schwartz value ratings. The culture comprises of organizational, national, regional, and individual culture. Individual culture plays an important role, but other cultural factors cannot be avoided. Key factors affecting the technology acceptance in Vorarlberg (Austria) are listed along with recommendations to leaders.
How people perceive stigmatization at work in connection with mental health problems and what role this stigmatization fulfils in the DACH-Region, means Germany-Austria-Switzerland, has so far received no greater attention from scientists. Although the stigma of mental illness has been extensively researched among the general population, little is known about its consequences of the stigma of mental health in the workplace.
This study seeks to bridge the gap in this area. As the purpose of this thesis is to illustrate the dynamics of stigmatization rather than to explain its mere quantitative relevance, I have chosen to investigate how the complex systemic interdependencies according to Forrester (1968) manifest in the reflection of the subjects.
On the background of socio-cultural aspects in the DACH-Region regarding mental health problems and forms and natures of stigma while following the question what role stigmatization plays in this German-speaking area DACH, I conducted a qualitative social research study with affected persons (employees from various German companies) to investigate this issue. Hereby I focus on people working in the industry sector.
The present thesis begins by exploring the question of intercultural and sociocultural differences in the DACH region according to Hofstede’s Dimensions, as well as their possible relevance for answering the research question. Definitions and theoretical interpretations regarding the backgrounds about mental health, mental health problems and their appearance will be mentioned. Based on Goffman’s (1963) research on stigma, I investigate why mental health issues have the potential to stigmatize especially at the workplace. Goffman’s ideas on stigma illustrate how by providing important insights into understanding the situation of affected persons. The connection between stereotypes, stigmatization, and discriminatory behaviour according to Major & O’Brien (2005) is hereby necessary to be noticed.
Through personal interviews I explore how, what way, people at work perceive stigmatization surrounding mental health problems and how stigmas interact. The findings conducted in this study give a cue towards the systemic approach of stigmatization. That is why a new hypothesis on the ways of stigmatization in German-speaking countries is drawn up. Stigmatization is under investigation as a systemic instrument for maintaining management and group power to affect single employees and restore group identity, consciously or unconsciously. I discuss the theoretical and practical implications of these findings for management behaviour and leadership development in organizations.
The boom of information technology development created high demand for skilled labour force in IT occupations. IT professionals install, test, build, repair or maintain hardware and software and can do the job from any location in the world.
Demand for the workforce significantly outstrips the global supply. In a situation of staff shortage employers have to compete on local and global labour markets. The ability of a firm to attract and retain the best talent would become a source of its sustainable competitive advantage.
Aim of the study is to understand what influences perception of employment attractiveness by IT professionals the most. This study intends to expend the existing knowledge about employees´ needs and “psychological contract” concept.
The research was conducted with the participation of 4 IT and 4 HR English-speaking experts who live and work in Austria. In the study the grounded theory approach and the descriptive qualitative methods were applied.
The research findings explain which factors influence the decision of IT professionals to join, stay or leave an employer. The results are discussed in relation to talent attraction and retention practices of Austrian employers.
An implementation approach of the gap navigation tree using the TurtleBot 3 Burger and ROS Kinetic
(2020)
The creation of a spatial model of the environment is an important task to allow the planning of routes through the environment. Depending on the number of sensor inputs different ways of creating a spatial environment model are possible. This thesis introduces an implementation approach of the Gap Navigation Tree which is aimed for usage with robots that have a limited amount of sensors. The Gap Navigation Tree is a tree structure based on depth discontinuities constructed from the data of a laser scanner. Using the simulated TurtleBot 3 Burger and ROS kinetic a framework is created that implements the theory of the Gap Navigation Tree. The framework is structured in a way that allows using different robots with different sensor types by separating the detection of depth discontinuities from the building and updating of the Gap Navigation Tree.
The classification of waste with neural networks is already a topic in some scientific papers. An application in the embedded systems area with current AI processors to accelerate the inference has not yet been discussed. In this master work a prototype is created which classifies waste objects and automatically opens the appropriate container for the object. The area of application is in the public space.
For the classification a dataset with 25,681 images and 11 classes is created to re-train the Convolution Neuronal Networks EfficientNet-B0, MobileNet-v2 and NASNet-mobile. These Convolution Neuronal Networks run on the current Edge \acrshort{ai} processors from Google, Intel and Nvidia and are compared for performance, consumption and accuracy.
The master thesis evaluates the result of these comparisons and shows the advantages and disadvantages of the respective processors and the CNNs. For the prototype, the most suitable combination of hardware and AI architecture is used and exhibited at the university fair KasetFair2020. An opinion survey on the application of the machine is conducted.
The fact that services have emerged a driving force and the fastest growing sector in international trade attracts researchers to follow the changes taking place in the service industry. This study extends the scientific discussion on internationalization of service firms. Unlike previous research that examined factors that influence a single firm’s decision to internationalize, I acknowledge the heterogeneity of services, and based on the results obtained from secondary analysis of primary qualitative data sets, answer the main research question how internationalization motives differ between people-processing services, possession-processing services, and information-based services. This research goes beyond identification of variation in internationalization motives and analyses the service characteristics that might be responsible for the differences. In addition, I assess the key trends in the service sector and predict the possible future internationalization motives that are likely to emerge from the current trends.
Findings of this study reveal two major issues. First, it is evident that reasons for internationalization differ among hotel, retail firms and Higher education institutions representing people-processing services, possession-processing services, and information-based services respectively. Second, a few motives are common across sub-sectors, however the significance of the motives vary from sub-sector to sub-sector. I conclude that the differences in underlying structures of the respective service sub-sectors is the fundamental cause for the variation in internationalization motives among service sub-sectors. Other factors such as distinctive characteristics of service, firm’s competitive strategies, income elasticity of demand, and life-cycle stage of the service sub-sector also contribute to the differences in internationalization motives.
This paper also presents three different factors, which are likely to emerge as significant factors that influence service firm internationalization decision in future. (1) Company’s urge to be socially responsible and the need to contribute towards the environmental well-being (2) The need to sell regional products and services to neighbouring nations and respond to consumers’ demand for sustainable consumerism (3) Decision to penetrate foreign markets facilitated by the low risks and low cost of internationalization.
In today’s world, companies feel the urge to disguise from competitors and to connect emotionally with consumers in order to foster a meaningful and long-lasting relationship. Simultaneously, stakeholders demand an increase of companies’ social responsibility. Cause-related marketing (CRM) is a marketing tool that addresses the change in societal values and the rising expectations from stakeholder groups. The increasing number of companies that choose to partner with a non-profit organization highlights that linking a charitable cause to the company's brand is an effective marketing tool. Authors illustrate that CRM, as a form of showing corporate social responsibility, will become even more important in the future. This master thesis examines the relationship between CRM, emotions, and culture. The research goal is to identify if CRM programs are effective in evoking emotions in consumers and if the cultural background of a consumer influences the evocation of certain emotions. The empirical findings outline that CRM programs are effective in evoking emotions. Other-focused emotions evoked by CRM programs are stronger expe-rienced by members of collectivistic countries than by members of individualistic countries. Likewise other-focused emotions evoked by CRM programs are stronger experienced by high interdependent selves than by low interdependent selves.
Marketing automation
(2021)
The phenomenon of the increase of numerous widespread and common diseases, ranging from simple dental problems to obesity, high blood pressure or diabetes, is a concern which can be observed in various aspects of the entire world. Reasons for this is a combination of an unhealthy diet and insufficient physical activity. Consequently, governments across the globe are seeing the need to change consumer behaviour by introducing plain packaging regulations. From an entrepreneurial point of view, this would result in financial losses as well as various limitations in product design, branding and differentiation. Therefore, an empirical study with 232 respondents was conducted, which revealed that the use of images on packaging activates emotions in customers within a few seconds. This master thesis examines possible correlations and differences between the importance of emotionally loaded product packaging and consumer behaviour at the point of sale. The persuasive effect of images on purchase decisions is based on personal consumer experiences and validated processing in the brain which trigger specific emotions. Modern companies are able to communicate company values through emotions by using images correctly. The results of the conducted survey enable Diezano to successfully implement the communication strategy in the event of the introduction of plain packaging regulations. By using mountain graphics, Diezano conveys values such as home, regional, refreshment, tasty, memories of childhood and nostalgia, which the brand aims to convey to the market. Based on the result of this master thesis, it is concluded that the picture superiority effect is mostly underestimated, yet it is an indispensable medium for emotional differentiation and thus a company’s success.
With green cosmetics becoming widely used in Germany, this research would like to fill a research gap and investigate the impact of transatlantic transportation on the willingness of German customers to purchasing the product. With growing environmental awareness this information might be decisive for companies willing to expand internationally. They can take it into consideration when creating their international expansion strategy and deciding for the mode of entry.
Current research also explores the option of targeting the customers with marketing messages to share information about the low environmental impact of the transatlantic transport. It tests different marketing messages and analyses their impact on green purchase intention.
The term start-up has become indispensable when new ideas are to be turned into business ventures. The number of start-ups is continuously increasing, but at the same time, many new start-ups are marked by failure. The successful path from start-up to a stable business model is to be explored in more detail in this thesis. The focus here is on the various success factors and how decisive they are.
At present, start-ups are mainly focusing on the area of digitalisation, not only triggered by the Covid19 pandemic but also by the high demand for digital products and services. In the past, start-ups founded in Silicon Valley/USA have been incredibly successful. Nevertheless, currently many other countries offer decisive advantages for start-ups and are therefore more attractive than the Silicon Valley. In Europe, Spain stands out with a rapidly growing start-up scene, primarily in the metropolises of Madrid and Barcelona.
This Master's thesis aims to empirically investigate the interrelationships of the necessary success factors in the start-up scene for the country of Spain. The focus of the study here is on the digitalisation industry. Qualitative content analysis is used for closer examination and is carried out through expert interviews. Qualitative research allows a much deeper insight into the interviewees' personal experiences and examines non-measurable factors. The subsequent evaluation is intended to present correlations and provide new insights. In summary, a list of recommendations is generated to provide future founders with suitable suggestions and advice right from the start.
The purpose of an energy model is to predict the energy consumption of a real system and to use this information to address challenges such as rising energy costs, emission reduction or variable energy availability. Industrial robots account for an important share of electrical energy consumption in production, which makes the creating of energy models for industrial robots desirable. Currently, energy modeling methods for industrial robots are often based on physical modeling methods. However, due to the increased availability of data and improved computing capabilities, data-driven modeling methods are also increasingly used in areas such as modeling and system identification of dynamic systems. This work investigates the use of current data-driven modeling methods for the creation of energy models focusing on the energy consumption of industrial robots.
For this purpose, a robotic system is excited with various trajectories to obtain meaningful data about the system behavior. This data is used to train different artificial neural network (ANN) structures, where the structures used can be categorized into (i) Long Short Term Memory Neural Network (LSTM) with manual feature engineering, where meaningful features are extracted using deeper insights into the system under consideration, and (ii) LSTM with Convolutional layers for automatic feature extraction. The results show that models with automatic feature extraction are competitive with those using manually extracted features. In addition to the performance comparison, the learned filter kernels were further investigated, whereby similarities between the manually and automatically extracted features could be observed. Finally, to determine the usefulness of the derived models, the best-performing model was selected for demonstrating its performance on a real use case.
In the context of this master thesis, general tensions within the relationship between headquarters and their subsidiaries are examined using the practical example of a Swiss company with its subsid-iary in Kenya. Thereby, the influence of cultural aspects and the associated different expectations on management and leadership are emphasized. In doing so, two countries are compared which have not yet been considered in the same context. The objective of this master thesis is to develop a framework that enables the headquarter in the German speaking area of Switzerland and the sub-sidiary in the Bantu speaking area of Kenya to overcome cultural barriers and to increase mutual understanding in the business context. This will facilitate the identification of potentially dysfunc-tional aspects in the working relationship and provide a basis for optimizing the existing business relationship between the Swiss headquarter and the Kenyan subsidiary.
This thesis addresses the overarching question of what the two business entities need to know about each other in terms of cultural characteristics and emerging differences in business practices (in terms of management/leadership) in order to improve the overall cooperation and working rela-tionship between the headquarter and its subsidiary. Thus, the following topics are emphasized with-in this thesis: tensions within the headquarter/subsidiary relationship, concise country profiles of Switzerland and Kenya including a cultural overview of both countries, cultural concepts including organizational culture, common leadership theories related to the situational leadership approach, and finally, an evaluation of the current status quo in the working relationship between the Swiss headquarter and the Kenyan subsidiary based on interviews.
In this work, the simulation possibilities of transient magnetic fields are investigated. For this purpose, an experimental setup is established to compare the simulation results with actual measurement data.
The experimental set-up consists of two coils, which are placed on two U-shaped iron cores. These cores are then brought together to form two air-gaps. These two gaps are used for measurement and the optional insertion of samples. The simulations are carried out with the finite element method (FEM) program ANSYS Maxwell 19R3.
In the first experiments, static simulations and measurements are compared to verify the validity of the available material data and the simulation techniques, especially the symmetry considerations, excitations of the coils, and boundary conditions. The static simulations show two main sources of uncertainty. The B-H curve of the core material used in the simulations and the air-gap distance uncertainty.
After validating the simulations with the static measurements, transient experiments are performed. In these experiments, the qualitative agreement of the simulation and measurement, as well as the characteristic rise times are compared. The experiments show a decisive influence of the considered loss mechanisms on the agreement of the simulation results with the measurements. Therefore, several simulations with different loss mechanisms are performed.
Finally, also the simulation capability including a material sample in the upper gap is investigated. Therefore, the conformity of the relative change of the measurement and the simulation is compared.
In the experiments a good simulation capability within a 5% error bar is seen. The main difficulty of this work represents the uncertainty due to the available material data. It is assumed, that with more accurate material data the error can be reduced significantly.
This paper analyses an electrical test tower of the OMCIRON electronics GmbH and evaluates whether a Predictive Maintenance (PdM) strategy can be implemented for the test towers. The company OMICRON electronics GmbH performs unit tests for its devices on test towers. Those tests consist of a multitude of subtests which all return a measurement value. Those results are tracked and stored in a database. The goal is to analyze the data of the test towers subtests and evaluate the possibility of implementing a predictive maintenance system in order to be able to predict the RUL and quantify the degradation of the test tower.
By assuming that the main degradation source are the relays of the test tower, a reliability modelling is performed which is the model-driven approach. The data-driven modelling process of the test tower consists of multiple steps. Firstly, the data is cleaned and compromised by removing redundances and optimizing for the best subtests where a subtest is rated as good if the trendability and monotonicity metric values are above a specific threshold. In a second step, the trend behaviours of the subtests are analyzed and ranked which illustrates that none of the subtests contained usable trend behaviour thus making an implementation of a PdM system impossible.
By using the ranking, the data-driven model is compared with the reliability model which shows that the assumption of the relays being the main error source is inaccurate.
An analysis of a possible anomaly detection model for a PdM is evaluated which shows that an anomaly detection is not possible for the test towers as well. The implementability of PdM for test towers and other OMICRON devices is discussed and followed up with proposals for future PdM implementations as well as additional analytical analyses that can be performed for the test towers.
Companies worldwide and, therefore, companies from Vorarlberg face a common problem: the lack of skilled workers that led to the so-called “war for talents” in the last decades. This problem encouraged scientists to investigate the importance of many different monetary incentives and non-cash benefits to win this war for talents. This master’s thesis aims to examine if and how companies in Vorarlberg already use non-cash benefits. Furthermore, the most important benefits and their influence on the attractiveness of job advertisements are identified.
For this purpose, interviews with three HR managers from companies in Vorarlberg are carried out. Subsequently, in a quantitative survey, 21 different monetary incentives and non-cash benefits, intangible non-cash benefits, and corporate culture are evaluated by 316 participants. Furthermore, the participants ranked five different job advertisements to conceive results on the research questions.
The results clearly show that non-cash benefits are far more critical for future employees than classical monetary incentives. Although the number of international participants was lower than the number of Austrian and German participants (41 to 81 to 194), it is still obvious that independent of nationality, non-cash benefits can lead to a competitive advantage for companies in Vorarlberg. The interviews show that companies already work with such benefits in their daily business but do not strategically communicate on the topic.
To summarize, it can be concluded that a variety of non-cash benefits should be implemented within a company and also should be mentioned in job advertisements as they can help to attract more applicants not only from Austria but also from abroad and, therefore, help to win the war for talents.
Leadership, leader-follower relationship, and
subordinates’ behaviors during the Covid-19
pandemic
(2021)
This master thesis investigates leadership traits and how they can drive success within international organizations in the digital era. The basic principles of what defines a leader have undergone significant scrutiny throughout the past one hundred years, however, the digital revolution has created the most upset when considering the requirements for efficient leadership.
This paper utilizes a literature review to first determine how modern leadership theory developed and the implications of current research, followed by an empirical study designed to collect real-world data which represents how current leaders active in various industries understand their role as a leader and what skills they use to promote success within their organization.
Cross-examination of these sources indicates that the most effective leaders employ a combination of Transformational Leadership Theory and Emotional Intelligence-based leadership. The extent to which a leader must individualize their style is strongly contingent on the organizational culture, the individual employees, and the external environment. While traits such as communication, charisma, and trustworthiness are certainly strong indications of an efficient leader, agility and adaptability clearly stand out as the traits which are most required for highly effective leaders in the digital era.