Refine
Year of publication
Document Type
- Article (15) (remove)
Institute
Language
- English (15)
Has Fulltext
- no (15)
Keywords
- Laser ablation (4)
- Laser beam machining (2)
- AWG (1)
- AlGaN/GaN HEMT (1)
- Bulk micromachining (1)
- Conduction bands (1)
- Distributed feedback lasers (1)
- Dye lasers (1)
- Elemental semiconductors (1)
- Excimer lasers (1)
- High-speed optical techniques (1)
- LSMO membrane (1)
- Log-periodic antenna (1)
- Microbolometer (1)
- Micromachining (1)
- Picosecond-neodymium-vanadate laser (1)
- Second harmonic generation (1)
- SiC MEMS (1)
- Simultaneous irradiation (1)
- Terahertz radiation (1)
- Two color excitation (1)
- friction (1)
- gas sensing (1)
- laser ablation (1)
- laser microtexturing (1)
- sensor (1)
- surface characterization (1)
- tribological characterization (1)
- ultra-short pulsed laser (1)
- wear (1)
Production and tribological characterization of tailored laser-induced surface 3D microtextures
(2019)
We present design of planar 16-channel, 100-GHz multi-mode polymer-based AWG. This AWG was designed for central wavelength of 1550 nm applying AWG-Parameters tool. The AWG structure was created and simulated in the commercial photonic tool PHASAR from Optiwave. Achieved transmission characteristics were evaluated by AWG-Analyzer tool. For the design, multi-mode waveguides having a cross-section of (4x4) µm2 were used. The simulated results show strong worsening of the transmission characteristics in comparison when using single-mode waveguides. Nevertheless, the transmitting channels are clearly separated. The reason for using thicker multi-mode waveguides in the design is possibility to fabricate the AWG structure on polymer basis using direct laser writing lithography.
This study presents different approaches to increase the sensing area of NiO based semiconducting metal oxide gas sensors. Micro- and nanopatterned laser induced periodic surface structures (LIPSS) are generated on silicon and Si/SiO2 substrates. The surface morphologies of the fabricated samples are examined by FE SEM. We select the silicon samples with an intermediate Si3N4 layer due to its superior isolation quality over the thermal oxide for evaluating the hydrogen and acetone sensitivity of a NiO based test sensor.