nein
Refine
Document Type
- Conference Proceeding (75) (remove)
Institute
- Forschungszentrum Mikrotechnik (35)
- Forschungszentrum Business Informatics (16)
- Technik | Engineering & Technology (11)
- Forschungszentrum Human Centred Technologies (10)
- Wirtschaft (7)
- Department of Computer Science (Ende 2021 aufgelöst; Integration in die übergeordnete OE Technik) (6)
- Forschungszentrum Energie (6)
- Forschung (5)
- Forschungszentrum Digital Factory Vorarlberg (5)
- Josef Ressel Zentrum für Robuste Entscheidungen (5)
Is part of the Bibliography
- yes (75)
Keywords
- photonics (5)
- arrayed waveguide gratings (4)
- MMI splitter (3)
- MMI splitters (3)
- Y-branch splitter (3)
- polymers (3)
- 3D MMI splitter (2)
- AWG design (2)
- AWG-spectrometer (2)
- Arrayed waveguide gratings (2)
The properties of diamond make it an attractive material for MEMS and sensor devices. We present the feasibility to fabricate membranes and cantilevers made of nano-(micro-) crystalline diamond films grown on Si/SiO2 substrates using microwave chemical vapour deposition (MWCVD). The patterning of micromechanical structures was performed by a combined process of femtosecond laser ablation and wet etching. We designed cantilever structures with varying lengths and widths (25, 50, 100, 200 and 300 μm). The cantilevers were made in a symmetric left- and right-hand configuration. An additional laser treatment was used to modify the mechanical properties of the left-hand cantilever. The deflection of the laser-treated, and non-treated sections was measured. The global mechanical system properties were simulated and corresponded with high accuracy to the measured results of deflection.
Femtosecond laser ablation on Si generates 2D ripple structures, known as laser induced periodic surface structures (LIPSS) and pinholes. We fabricated membranes with 20 to 50 μm thickness perforated by an array of tapered pinholes up to 5 μm in diameter and 10 to 20 μm spacing. Within several micrometer the pinholes transform into hollow photonic waveguides with constant diameter from 1μm to 2μm. Such structures offer a 3D photonic coupling device for polymer Y-branch- and MMI-splitter. We measured a considerable change of electrical resistivity for 500 ppm H2 in air using Si/SiO2/TiO2 substrates with 2D LIPSS. We propose to investigate 3D waveguide arrays also for photonic-chemical sensors.
By a simple femtosecond laser process, we fabricated metal-oxide/gold composite films for electrical and optical gas sensors. We designed a dripple wavelength AWG-spectrometer, matched to the plasma absorption wavelength region of the composite films. H2/CO absorptions fit well with the AWG design for multi gas detection sensor arrays
Oral applications of ultra-short laser pulses - a new approach for gentle and painless treatment?
(2006)
The utilization of lasers in dentistry expands greatly in recent years. For instance, fs-lasers are effective for both drilling and caries prevention, while cw-lasers are useful for adhesive hardening. A cutting-edge application of lasers in dentistry is the debonding of veneers. While there are pre-existing tools for this purpose, there is still potential for improvement. Initial efforts to investigate laser assisted debonding mechanisms with measurements of the optical and mechanical properties of teeth and prosthetic ceramics are presented. Preliminary tests conducted with a laser system used for debonding that is commercially available showed differences in the output power set at the systems console to that at specified distances from the handpiece. Furthermore, the optical properties of the samples (human teeth and ceramics) were characterised. The optical properties of the ceramics should closely resemble those of teeth in terms of look and feel, but they also influence the laser assisted debonding technique and thus must be taken into account. In addition first attempts were performed to investigate the mechanical properties of the samples by means of pump-probe-elastography under a microscope. By analyzing the sample surface up to 20 ns after a fs-laser pulse impact, pressure and shock waves could be detected, which can be utilized to determine the elastic constants of specific materials. Together such investigations are needed to shape the basis for a purely optical approach of debonding of veneers utilizing acoustic waves.
Digital twin as enabler of business model innovation for infrastructure construction projects
(2023)
Emerging technologies and methods are becoming an important element of the construction industry. Digital Twins are used as a base to store data in BIM models and make use out of the data respectively make the data visible. The transparency in all phases of the lifecycle of building and infrastructure assets is crucial in order to get a more efficient lifecycle of planning, construction and maintenance. Whereas other industries increased performance in these phases by making use out of the data, construction industry is stuck in traditional methods and business models. In this paper we propose a concept that focuses on the digital production twin. The comparison of planning data with As-Is production data can empower a data driven continuous improvement process and support the decision making process of future innovations and suitable business models. This paper outlines the possibility to use the data stored in a digital twin with regards to the evaluation of possible business models.
Through mandatory ESG (environmental, social, governance) reporting large companies must disclose their ESG activities showing how sustainability risks are incorporated in their decision-making and production processes. This disclosure obligation, however, does not apply to small and medium-sized enterprises (SME), creating a gap in the ESG dataset. Banks are therefore required to collect sustainability data of their SME customers independently to ensure complete ESG integration in the risk analysis process for loans. In this paper, we examine ESG risk analysis through a smart science approach laying the focus on possible value outcomes of sustainable smart services for banks as well as for their (SME) customers. The paper describes ESG factors, how services can be derived from them, targeted metrics of ESG and an ESG Service Creation Framework (business ecosystem building, process model, and value creation). The description of an exemplary use case highlighting the necessary ecosystem for service creation as well as the created value concludes the paper.
Smart services disrupt business models and have the potential to stimulate the circular economy transition of regions, enabling an environmentally friendly atmosphere for sustainable and innovation-driven growth of regions. Although smart services are powerful means for deploying circular economy goals in industrial practices, there is little systematic guidance on how the adoption of smart services could improve resource efficiency and stimulate smart regional innovation-driven growth, enabled through circular design. Implemented in the scope of Vorarlberg’s smart specialization strategy, this paper contributes to the literature on the circular economy and regional innovation-driven growth by assessing critical factors of the value creation and value capture implemented within the scope of the quadruple helix system. By identifying the main challenges and opportunities of collaborative value creation and value capture in setting-up smart circular economy strategies and by assessing the role of innovation actors within the quadruple helix innovation system, the study provides recommendations and set of guidelines for managers and public authorities in managing circular transition. Finally, based on the analysis of the role of actors in creating shared value and scaling-up smart circular economy practices in the quadruple helix innovation systems, the paper investigates the role of banks as enablers of circular economy innovation-driven regional growth and smart value creation.
Complementarities and synergies of quadruple helix innovation design in smart city development
(2020)
Increased urbanization trends are stimulating regional needs to support transitions from urban environments to smart cities, using its holistic perspective as a source to innovation. Strong relations between smart cities, urban and regional development, are getting increased attention both at policy and implementation level, providing fertile ground for execution of the new European policy frameworks that supports quadruple helix approaches to innovation. Smart specialization strategies (RIS3) encompass such initiatives, placing ICT and collaboration between academia, industry, government, and citizen at the center of urban innovation. However, there is still lack of research on effects of such approaches to innovation, involving both quadruple helix clusters and ICT in utilizing innovation potentials for developing smart cities. This study aims to increase the understanding on how quadruple helix urban innovation strengthens competitiveness of regions by improving its local smart areas – RIS3. We identified smart specialization patterns and applied comparative benchmark between nine smallmedium sized urban regions in Central Europe. Building on these results, the study provides an overview of the effects of RIS3 strategies implemented through quadruple helix innovation clusters on competitiveness of regions and Smart City development.
In this paper, a 256-channel, 10-GHz arrayed waveguide gratings demultiplexer for ultra-dense wavelength division multiplexing was designed using an in-house developed tool called AWG-Parameters. The AWG demultiplexer was designed for a central wavelength of 1550 nm and the structure was simulated in PHASAR tool from Optiwave. Two different AWG designs were developed and the influence of the design parameters on the AWG performance was studied.
We present 256-channel, 25-GHz AWG designed for ultra-dense wavelength division multiplexing. For the design two in-house developed tools were used: AWG-Parameters tool for the calculation of input design parameters and AWGAnalyser tool, used to evaluate the simulated transmission characteristics. The AWG structure was designed for AWG central wavelength of 1550 nm and simulated with PHASAR tool from Optiwave. To keep the size of AWG structure as small as possible the number of waveguides in the phased array was tested. The simulations show that there is a certain minimum number of phased array waveguides necessary to reach sufficient AWG performance. After optimization, the AWG structure reached 10 cm x 11 cm in size and satisfying optical properties.
We present design, simulation and optimization of polymer based 16-channel, 100-GHz AWG designed for central wavelength of 1550 nm. The input design parameters were calculated applying AWG-Parameters tool. The simulations were performed applying a commercial photonic tool PHASAR from Optiwave. The achieved transmission characteristics were evaluated by AWG-Analyzer tool and show a satisfying agreement between designed and simulated AWG optical properties. Finally, the influence of the number of phased array (PA) waveguides on the AWG performance was studied. The results show that there is a certain minimum number of PA waveguides necessary to reach sufficient AWG performance.
In this paper we present various educational activities with Photonics Explorer, an educational kit developed by the photonics research team B - PHOT at VUB (Vrije Universiteit Brussel) for students at secondary schools. The concept is a ‘lab-in-a-box’ that enables students of the 2 nd and 3 rd grade to do photonics experiments themselves at school with lasers, LEDs, lenses, optical fibers, and other high-tech components. Even though, the kit was developed for the secondary schools, we use experiments from the kit also for some other teaching activities such as lectures at the university, photonics workshops for teachers and children at primary/secondary schools or for events such as children's/youth's university or the night of sciences. In the frame of Austrian based project Phorsch! we have organized most of these activities which will be presented here.
In this paper, design of 1×8 multimode interference passive optical splitter is proposed. The structure of the splitter is designed based on a silicon nitride material platform. This work aims to find the minimum physical dimensions of the designed splitters with the satisfactory optical performance. According to the minimum insertion loss and minimum non-uniformity, the optimum length of the splitters is determined.
This paper presents the design, simulation, and optimization of a 1×128 multimode interference (MMI) splitter with a silica-on-silicon channel profile. This work aims to study the influence of the different S-Bend output waveguide shapes at the end of the MMI coupler on the final optical properties. The 1×128 MMI splitters have been simulated using beam propagation method in OptiBPM software. The optical properties of all considered splitters with different shapes of outputs waveguides are discussed and compared with each other. Based on the minimum insertion loss and non-uniformity, the final shape of output waveguides, ensuring the lowest losses, is determined.
This paper describes two different designs of 1×8 passive optical splitters. The first splitter consists of cascade arranged directional waveguide branches (Y-branch splitter) with (0.8×0.16) µm2 waveguide cross-section. The second splitter is based on multimode interference occurring in a large MMI coupler, which uses a self-imaging effect for beam propagation, exhibiting the same waveguide core size as a Y-branch splitter. The waveguide channel profile, used in both approaches, is based on a silicon nitride material platform, with a refractive index of core being nc = 1.925 and a refractive index of cladding ncl = 1.4575. The splitters are designed as a planar structure for a medical operating wavelength 850 nm. Design, simulation, and optimization of passive optical components are performed by a commercial photonic software tool BeamPROP simulation engine by RSoft Photonics Suite tool, employing beam propagation method. This work aims to find the minimum physical dimensions of the designed splitters with the satisfactory optical performance. According to the minimum insertion loss and minimum non-uniformity, the optimum length of the splitters is determined. Finally, the optical properties of splitters for both approaches are discussed and compared with each other.
Design, simulation, and optimization of the 1×4 optical three-dimensional multimode interference splitter using IP-Dip polymer as a core and polydimethylsiloxane (PDMS) Sylgard 184 as a cladding is demonstrated. The splitter was simulated by using beam propagation method in BeamPROP simulation module of RSoft photonic tool and optimized for an operating wavelength of 1.55 μm . According to the minimum insertion loss, the dimensions of the splitter were optimized for a waveguide with a core size of 4×4 μm2 . The objective of the study is to create the design for fabrication by three-dimensional direct laser writing optical lithography.
Design, simulation, and optimization of the 1×4 optical three-dimensional multimode interference splitter using IP-Dip polymer as a core and polydimethylsiloxane (PDMS) Sylgard 184 as a cladding is demonstrated. The splitter was simulated by using beam propagation method in BeamPROP simulation module of RSoft photonic tool and optimized for an operating wavelength of 1.55 μm . According to the minimum insertion loss, the dimensions of the splitter were optimized for a waveguide with a core size of 4×4 μm2 . The objective of the study is to create the design for fabrication by three-dimensional direct laser writing optical lithography.
The usage of data gathered for Industry 4.0 and smart factory scenarios continues to be a problem for companies of all sizes. This is often the case because they aim to start with complicated and time-intensive Machine Learning scenarios. This work evaluates the Process Capability Analysis (PCA) as a pragmatic, easy and quick way of leveraging the gathered machine data from the production process. The area of application considered is injection molding. After describing all the required domain knowledge, the paper presents an approach for a continuous analysis of all parts produced. Applying PCA results in multiple key performance indicators that allow for fast and comprehensible process monitoring. The corresponding visualizations provide the quality department with a tool to efficiently choose where and when quality checks need to be performed. The presented case study indicates the benefit of analyzing whole process data instead of considering only selected production samples. The use of machine data enables additional insights to be drawn about process stability and the associated product quality.
Continuous monitoring of interactive exhibits in museums as part of a persuasive design approach
(2021)
Parametric anti-resonance is a phenomenon that occurs in systems with at least two degrees of freedom; this can be achieved by periodically exciting some parameters of the system. The effect of this properly tuned periodicity is to increase the dissipation in the system, which leads to a raising in the effective damping of vibrations. This contribution presents the design of an open-loop control to reduce the settling time using the anti-resonance concept. The control signal consists of a quasi-periodic signal capable of transferring the system’s oscillations from one mode to another mode of the system. The general averaging technique is used to characterize the dynamics, particularly the so-called slow dynamics of motion. With this analysis, the control signal is designed for the potential application of a microelectromechanical sensor arrangement; for this specific example, up to 96.8% reduction of settling time is achieved.
The paper shows concepts of optical splitting based on three dimensional (3D) optical splitters based on multimode interference principle. This paper is focused on the design, fabrication and characterization of 3D MMI splitter with formed output waveguides based on IP-Dip polymer for direct application on optical fiber. The MMI optical splitter was simulated and fabricated using direct laser writing process. Output characteristics were characterized by highly resolved near-field scanning optical microscope (NSOM) and compared with 3D MMI splitter without output waveguides.
In this paper, we document optical splitters based on Y-branch and also on MMI splitting principle. The 1×4 Y-branch splitter was prepared in 3D geometry fully from polymer approaching the single mode transmission at 1550 nm. We also prepared new concept of 1×4 MMI optical splitter. Their optical properties and character of output optical field were measured by near-field scanning optical microscope. Splitting properties and optical outputs of both splitters are very promising and increase an attractiveness of presented 3D technology and polymers.
ROS 2 in Embedded Systemen
(2022)
Das Robot Operating System in seiner zweiten Version (ROS 2) findet zunehmend Verwendung und das nicht nur in Robotern. Dieser Beitrag gibt einen Überblick über den Aufbau und die Funktion von ROS 2. Die wesentlichen Elemente werden vorgestellt, das Publish-Subscribe-Konzept, das der Kommunikation zugrunde liegt, wird erläutert. Die Anforderungen von ROS 2 an Hardware und Betriebssystem werden beleuchtet und es werden Betrachtungen zu dessen Echtzeitverhalten gemacht.
Due to the increasing trend of photonic element miniaturisation and the need for optical splitting, we propose and simulate a new type of three-dimensional (3D) optical splitter based on multimode interference (MMI) for the wavelength of 1550 nm. We present various designs and simulations of various parameters for the optimized MMI splitter. We focus on the possibility of its integration on an optical fiber. The design is focused on a possible production process using 3D laser lithography for the prepared experiments. The MMI splitter was prepared by laser lithography using direct writing process and finally investigated by output characterisation by the near-field measurement.
Purpose: Although there is an apparent potential in using data for advanced services in manufacturing environments, SMEs are reluctant to share data with their ecosystem partners, which prevents them from leveraging this potential. Therefore, the purpose of this paper is to analyse the reasons behind these resistances. The argumentation paves the way for elaborating countermeasures that are adequate for the specific situation and the typical capabilities of SMEs.
Design/Methodology/Approach: The analysis is based on literature research and in-depth interviews with management representatives of 15 companies in manufacturing service ecosystems. Half of these are manufacturers and the other half technology or service providers for manufacturers. They are SMEs or partly larger companies operating in structures that are typical for SMEs.
Findings: Data sharing hurdles are investigated in the five dimensions, 1. quantifying the value of data, 2. willingness to share data and trust, 3. organizational culture and mindset, 4. legal aspects, and 5. security and privacy. The ability to quantify the value of data is a necessary but not sufficient precondition for data sharing, which must be enabled by adequate measures in the other four dimensions.
Originality/Value: The findings of this empirical study and the solution approach provide an SME-specific framework to analyze hurdles that must be overcome for sharing data in an ecosystem.
Manufacturing SMEs can apply the framework to overcome the hurdles by specific insights and solution approaches. Furthermore, the analysis illustrates the future research direction of the project towards a comprehensive solution approach for data sharing in a manufacturing ecosystem.
PV hosting capacity provides utilities the knowledge of the maximum amount of solar installations possible to accommodate in low voltage grids such that no operational problems arise. As the quantification of the hosting capacity requires data collection, grid modelling, and often time-consuming simulations, simplified estimations for large-scale applications are of interest. In this paper, Bayesian statistical inference is applied to estimate the hosting capacities of more than 5000 real feeders in Austria. The results show that the hosting capacity of 95% of the total feeders can be estimated with a mean error below 20% by only having knowledge of a random sample of 5%. Moreover, the hosting capacity estimation at a regional level shows a maximum error below 9%, also relying on a random sample of 5% of the total feeders. Furthermore, the approach proposed provides a methodology to assess new parameters aiming to improve the accuracy of the hosting capacity estimation at a feeder level.
As the boundary between real and virtual life is becoming increasingly blurred, researchers and practitioners are looking for ways to integrate the two intending to improve human lives in a plethora of domains. A cutting-edge concept is the design of Digital Twins (DT), having a broad range of implications and applications, spanning from education, training, as well as safety and productivity in the workplace. An emergent approach for implementing DTs is the usage of mixed reality (MR) and augmented reality (AR), which are well aligned with merging real and virtual objects to enhance the human’s ability to interact with and manage DTs. Yet, this is still a novel area of research and, as such, a grounded understanding of the current state, challenges, and open questions is still lacking. Towards this, we conducted a PRISMA-based literature review of scientific articles and book chapters dealing with the use of MR and AR for digital twins. After a thorough screening phase and eligibility check, 25 papers were analyzed, sorted and compared by different categories like research topic (e.g., visualization, guidance), domain (e.g., manufacturing, education), paper type (e.g., design study, evaluation), evaluation type (user study, case study or none), used hardware (e.g., Microsoft HoloLens, mobile devices) as well as the different outcomes (result type and topic, problems, outlook). The major finding of this research survey is the predominant focus of the reviewed papers on the technology itself and the neglect of factors regarding the users. We, therefore, encourage researchers in this area to keep the importance of ease and joy of use in mind and include users in multiple stages of their work.
IBH Living Lab AAL
(2021)
A new software tool, called AWG-Wuckler, is developed to calculate geometric parameters of arrayed waveguide grating structures for telecommunication and medical applications. These parameters are crucial for a AWG layout which will be created and simulated using commercial photonic design tools. The design process of AWG is very complex because its geometric dimensions depend on a large number of input design parameters and other input design parameters. Often geometric constraints require an adjustment of the input design parameters and vice versa. Calculation and adjustment of the geometric parameters is a time-consuming process that is currently not fully supported by any commercial photonic tool. AWG-Wuckler tool overcomes this issue and offers a fast and easy to use solution. The tool was already applied in various AWG designs and is technologically well proven.
Small and medium-sized enterprises often face resource deficits and there- fore depend on cooperating with other actors to stay innovative in a competitive environment. Establishing and maintaining actual co-creation and service inter- action strategies however is challenging. A reason for this is the complexity of finding methodologies and tools to create valuable outcome and the lack of knowledge of collaboration toolsets, also in virtual environments. This paper introduces an Innovation-Method-Framework consisting of innovation methods for increased service interaction and value co-creation among service stakeholders. Also, toolsets for the framework’s practical application are provided.
Tap or swipe
(2023)